Commit b6bb23b9 authored by Vinh Nguyen Huu Tuong's avatar Vinh Nguyen Huu Tuong Committed by Josh Boyer

powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board

This patch extends PCI-E driver to support PCI-E for APM821xx SoC on Bluestone
board.
Signed-off-by: default avatarVinh Nguyen Huu Tuong <vhtnguyen@apm.com>
Signed-off-by: default avatarJosh Boyer <jwboyer@gmail.com>
parent 645609c0
......@@ -23,6 +23,7 @@ config BLUESTONE
default n
select PPC44x_SIMPLE
select APM821xx
select PPC4xx_PCI_EXPRESS
select IBM_EMAC_RGMII
help
This option enables support for the APM APM821xx Evaluation board.
......
......@@ -1050,6 +1050,74 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
.check_link = ppc4xx_pciex_check_link_sdr,
};
static int __init apm821xx_pciex_core_init(struct device_node *np)
{
/* Return the number of pcie port */
return 1;
}
static int apm821xx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
{
u32 val;
/*
* Do a software reset on PCIe ports.
* This code is to fix the issue that pci drivers doesn't re-assign
* bus number for PCIE devices after Uboot
* scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
* PT quad port, SAS LSI 1064E)
*/
mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
mdelay(10);
if (port->endpoint)
val = PTYPE_LEGACY_ENDPOINT << 20;
else
val = PTYPE_ROOT_PORT << 20;
val |= LNKW_X1 << 12;
mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000);
mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000);
mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
mdelay(50);
mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
/* Poll for PHY reset */
val = PESDR0_460EX_RSTSTA - port->sdr_base;
if (ppc4xx_pciex_wait_on_sdr(port, val, 0x1, 1, 100)) {
printk(KERN_WARNING "%s: PCIE: Can't reset PHY\n", __func__);
return -EBUSY;
} else {
mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
(mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
PESDRx_RCSSET_RSTPYN);
port->has_ibpre = 1;
return 0;
}
}
static struct ppc4xx_pciex_hwops apm821xx_pcie_hwops __initdata = {
.want_sdr = true,
.core_init = apm821xx_pciex_core_init,
.port_init_hw = apm821xx_pciex_init_port_hw,
.setup_utl = ppc460ex_pciex_init_utl,
.check_link = ppc4xx_pciex_check_link_sdr,
};
static int __init ppc460sx_pciex_core_init(struct device_node *np)
{
/* HSS drive amplitude */
......@@ -1362,6 +1430,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
if (of_device_is_compatible(np, "ibm,plb-pciex-460sx"))
ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops;
if (of_device_is_compatible(np, "ibm,plb-pciex-apm821xx"))
ppc4xx_pciex_hwops = &apm821xx_pcie_hwops;
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment