Commit b6dc71f3 authored by Vandana Kannan's avatar Vandana Kannan Committed by Daniel Vetter

drm/i915/bxt: Port PLL programming BUN

BUN 1: prop_coeff, int_coeff, tdctargetcnt programming updated and tied to
VCO frequencies. Program i_lockthresh in PORT_PLL_9.

VCO calculated based on the formula:
Desired Output = Port bit rate in MHz (DisplayPort HBR2 is 5400 MHz)
Fast Clock = Desired Output / 2
VCO = Fast Clock * P1 * P2

Prop_coeff, int_coeff, and tdctargetcnt modified according to above
calculation.

BUN 2: Port PLLs require additional programming at certain frequencies -
DCO amplitude in PORT_PLL_10

Review comments from Siva which were addressed in the initial version of the
patch.
	- Change PORT_PLL_LOCK_THRESHOLD to PORT_PLL_LOCK_THRESHOLD_MASK
	- Calculate for HDMI
	- Correct values for vco = 5.4
	- return in case of invalid vco range

v2: Imre's review comments addressed
	- change dcoampovr_en to dcoampovr_en_h
	- change PORT_PLL_DCO_AMP_OVR_EN to PORT_PLL_DCO_AMP_OVR_EN_H
	- Correct lane stagger value for 324MHz
	- Make coef common for HDMI and DP
	- remove superfluous comments

v3: Imre's comments addressed
	- Remove Prop_coeff, int_coeff, tdctargetcnt, dcoampovr_en, gain_ctl,
	dcoampovr_en_h from bxt_clk_div and make them local variables.
Signed-off-by: default avatarVandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> [v1]
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Reviewed-by: default avatarImre Deak <imre.deak@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 0c9b3715
......@@ -309,7 +309,7 @@ struct intel_dpll_hw_state {
uint32_t cfgcr1, cfgcr2;
/* bxt */
uint32_t ebb0, pll0, pll1, pll2, pll3, pll6, pll8, pcsdw12;
uint32_t ebb0, pll0, pll1, pll2, pll3, pll6, pll8, pll10, pcsdw12;
};
struct intel_shared_dpll_config {
......
......@@ -1204,6 +1204,12 @@ enum skl_disp_power_wells {
#define PORT_PLL_GAIN_CTL(x) ((x) << 16)
/* PORT_PLL_8_A */
#define PORT_PLL_TARGET_CNT_MASK 0x3FF
/* PORT_PLL_9_A */
#define PORT_PLL_LOCK_THRESHOLD_MASK 0xe
/* PORT_PLL_10_A */
#define PORT_PLL_DCO_AMP_OVR_EN_H (1<<27)
#define PORT_PLL_DCO_AMP_MASK 0x3c00
#define PORT_PLL_DCO_AMP(x) (x<<10)
#define _PORT_PLL_BASE(port) _PORT3(port, _PORT_PLL_0_A, \
_PORT_PLL_0_B, \
_PORT_PLL_0_C)
......
......@@ -1340,22 +1340,18 @@ struct bxt_clk_div {
uint32_t m2_frac;
bool m2_frac_en;
uint32_t n;
uint32_t prop_coef;
uint32_t int_coef;
uint32_t gain_ctl;
uint32_t targ_cnt;
uint32_t lanestagger;
};
/* pre-calculated values for DP linkrates */
static struct bxt_clk_div bxt_dp_clk_val[7] = {
/* 162 */ {4, 2, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
/* 270 */ {4, 1, 27, 0, 0, 1, 3, 8, 1, 9, 0xd},
/* 540 */ {2, 1, 27, 0, 0, 1, 3, 8, 1, 9, 0x18},
/* 216 */ {3, 2, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
/* 243 */ {4, 1, 24, 1258291, 1, 1, 5, 11, 2, 9, 0xd},
/* 324 */ {4, 1, 32, 1677722, 1, 1, 5, 11, 2, 9, 0xd},
/* 432 */ {3, 1, 32, 1677722, 1, 1, 5, 11, 2, 9, 0x18}
/* 162 */ {4, 2, 32, 1677722, 1, 1, 0xd},
/* 270 */ {4, 1, 27, 0, 0, 1, 0xd},
/* 540 */ {2, 1, 27, 0, 0, 1, 0x18},
/* 216 */ {3, 2, 32, 1677722, 1, 1, 0xd},
/* 243 */ {4, 1, 24, 1258291, 1, 1, 0xd},
/* 324 */ {4, 1, 32, 1677722, 1, 1, 0x18},
/* 432 */ {3, 1, 32, 1677722, 1, 1, 0x18}
};
static bool
......@@ -1366,6 +1362,9 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
{
struct intel_shared_dpll *pll;
struct bxt_clk_div clk_div = {0};
int vco = 0;
uint32_t prop_coef, int_coef, gain_ctl, targ_cnt;
uint32_t dcoampovr_en_h, dco_amp;
if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
intel_clock_t best_clock;
......@@ -1389,11 +1388,7 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
clk_div.m2_frac = best_clock.m2 & ((1 << 22) - 1);
clk_div.m2_frac_en = clk_div.m2_frac != 0;
/* FIXME: set coef, gain, targcnt based on freq band */
clk_div.prop_coef = 5;
clk_div.int_coef = 11;
clk_div.gain_ctl = 2;
clk_div.targ_cnt = 9;
vco = best_clock.vco;
if (clock > 270000)
clk_div.lanestagger = 0x18;
else if (clock > 135000)
......@@ -1423,6 +1418,32 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
clk_div = bxt_dp_clk_val[0];
DRM_ERROR("Unknown link rate\n");
}
vco = clock * 10 / 2 * clk_div.p1 * clk_div.p2;
}
dco_amp = 15;
dcoampovr_en_h = 0;
if (vco >= 6200000 && vco <= 6480000) {
prop_coef = 4;
int_coef = 9;
gain_ctl = 3;
targ_cnt = 8;
} else if ((vco > 5400000 && vco < 6200000) ||
(vco >= 4800000 && vco < 5400000)) {
prop_coef = 5;
int_coef = 11;
gain_ctl = 3;
targ_cnt = 9;
if (vco >= 4800000 && vco < 5400000)
dcoampovr_en_h = 1;
} else if (vco == 5400000) {
prop_coef = 3;
int_coef = 8;
gain_ctl = 1;
targ_cnt = 9;
} else {
DRM_ERROR("Invalid VCO\n");
return false;
}
memset(&crtc_state->dpll_hw_state, 0,
......@@ -1439,11 +1460,16 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
PORT_PLL_M2_FRAC_ENABLE;
crtc_state->dpll_hw_state.pll6 =
clk_div.prop_coef | PORT_PLL_INT_COEFF(clk_div.int_coef);
prop_coef | PORT_PLL_INT_COEFF(int_coef);
crtc_state->dpll_hw_state.pll6 |=
PORT_PLL_GAIN_CTL(clk_div.gain_ctl);
PORT_PLL_GAIN_CTL(gain_ctl);
crtc_state->dpll_hw_state.pll8 = targ_cnt;
crtc_state->dpll_hw_state.pll8 = clk_div.targ_cnt;
if (dcoampovr_en_h)
crtc_state->dpll_hw_state.pll10 = PORT_PLL_DCO_AMP_OVR_EN_H;
crtc_state->dpll_hw_state.pll10 |= PORT_PLL_DCO_AMP(dco_amp);
crtc_state->dpll_hw_state.pcsdw12 =
LANESTAGGER_STRAP_OVRD | clk_div.lanestagger;
......@@ -2376,10 +2402,16 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv,
temp |= pll->config.hw_state.pll8;
I915_WRITE(BXT_PORT_PLL(port, 8), temp);
/*
* FIXME: program PORT_PLL_9/i_lockthresh according to the latest
* specification update.
*/
temp = I915_READ(BXT_PORT_PLL(port, 9));
temp &= ~PORT_PLL_LOCK_THRESHOLD_MASK;
temp |= (5 << 1);
I915_WRITE(BXT_PORT_PLL(port, 9), temp);
temp = I915_READ(BXT_PORT_PLL(port, 10));
temp &= ~PORT_PLL_DCO_AMP_OVR_EN_H;
temp &= ~PORT_PLL_DCO_AMP_MASK;
temp |= pll->config.hw_state.pll10;
I915_WRITE(BXT_PORT_PLL(port, 10), temp);
/* Recalibrate with new settings */
temp = I915_READ(BXT_PORT_PLL_EBB_4(port));
......@@ -2443,6 +2475,7 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
hw_state->pll3 = I915_READ(BXT_PORT_PLL(port, 3));
hw_state->pll6 = I915_READ(BXT_PORT_PLL(port, 6));
hw_state->pll8 = I915_READ(BXT_PORT_PLL(port, 8));
hw_state->pll10 = I915_READ(BXT_PORT_PLL(port, 10));
/*
* While we write to the group register to program all lanes at once we
* can read only lane registers. We configure all lanes the same way, so
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment