Commit b6f800b1 authored by Jeff Garzik's avatar Jeff Garzik

8139too net driver updates:

* Support new clone board.
* Count rx-lost-in-ring events.
* Support ethtool-compatible bitmapped printk message enable number.
* Support MII ethtool helper interface, and associated ioctls.
* Replace some MII-related magic numbers with linux/mii.h constants.
* Add in optional (and hopefully preferred... after testing) code
for resetting RX DMA engine on error.
parent fca22a09
...@@ -96,7 +96,10 @@ AT-2500TX 10/100 PCI Fast Ethernet Network Adapter Card ...@@ -96,7 +96,10 @@ AT-2500TX 10/100 PCI Fast Ethernet Network Adapter Card
KTI KF-230TX KTI KF-230TX
KTI KF-230TX/2 KTI KF-230TX/2
Lantech FastNet TX Lantech FastNet TX
Ovislink Fast Ethernet
Planet ENW-9504 (V.4) 10/100
SMC EZNET 10/100 SMC EZNET 10/100
UNEX NexNIC ND012C
(please add your adapter model to this list) (please add your adapter model to this list)
...@@ -181,11 +184,18 @@ suggestions welcome) (WIP) ...@@ -181,11 +184,18 @@ suggestions welcome) (WIP)
Change History Change History
-------------- --------------
Version 0.9.23 - In progress
* New, compile-time conditional for testing better RX reset
* Only account specific RX errors if rx_status is !OK
Version 0.9.22 - November 8, 2001 Version 0.9.22 - November 8, 2001
* Additional retries before aborting Tx * Additional retries before aborting Tx
* Do not write other TxConfig bits when writing clear-abort bit. * Do not write other TxConfig bits when writing clear-abort bit.
* Ack TxErr intr status after each Tx abort, too. * Ack TxErr intr status after each Tx abort, too.
* Fix oops in interface restart
Version 0.9.21 - November 1, 2001 Version 0.9.21 - November 1, 2001
......
This diff is collapsed.
...@@ -179,6 +179,7 @@ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then ...@@ -179,6 +179,7 @@ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
dep_mbool ' Use PIO instead of MMIO' CONFIG_8139TOO_PIO $CONFIG_8139TOO dep_mbool ' Use PIO instead of MMIO' CONFIG_8139TOO_PIO $CONFIG_8139TOO
dep_mbool ' Support for automatic channel equalization (EXPERIMENTAL)' CONFIG_8139TOO_TUNE_TWISTER $CONFIG_8139TOO $CONFIG_EXPERIMENTAL dep_mbool ' Support for automatic channel equalization (EXPERIMENTAL)' CONFIG_8139TOO_TUNE_TWISTER $CONFIG_8139TOO $CONFIG_EXPERIMENTAL
dep_mbool ' Support for older RTL-8129/8130 boards' CONFIG_8139TOO_8129 $CONFIG_8139TOO dep_mbool ' Support for older RTL-8129/8130 boards' CONFIG_8139TOO_8129 $CONFIG_8139TOO
dep_mbool ' Experiment for better RX reset (EXPERIMENTAL)' CONFIG_8139_NEW_RX_RESET $CONFIG_8139TOO $CONFIG_EXPERIMENTAL
dep_tristate ' SiS 900/7016 PCI Fast Ethernet Adapter support' CONFIG_SIS900 $CONFIG_PCI dep_tristate ' SiS 900/7016 PCI Fast Ethernet Adapter support' CONFIG_SIS900 $CONFIG_PCI
dep_tristate ' SMC EtherPower II' CONFIG_EPIC100 $CONFIG_PCI dep_tristate ' SMC EtherPower II' CONFIG_EPIC100 $CONFIG_PCI
dep_tristate ' Sundance Alta support' CONFIG_SUNDANCE $CONFIG_PCI dep_tristate ' Sundance Alta support' CONFIG_SUNDANCE $CONFIG_PCI
......
...@@ -165,7 +165,7 @@ obj-$(CONFIG_3C515) += 3c515.o ...@@ -165,7 +165,7 @@ obj-$(CONFIG_3C515) += 3c515.o
obj-$(CONFIG_EEXPRESS) += eexpress.o obj-$(CONFIG_EEXPRESS) += eexpress.o
obj-$(CONFIG_EEXPRESS_PRO) += eepro.o obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
obj-$(CONFIG_8139CP) += 8139cp.o mii.o obj-$(CONFIG_8139CP) += 8139cp.o mii.o
obj-$(CONFIG_8139TOO) += 8139too.o obj-$(CONFIG_8139TOO) += 8139too.o mii.o
obj-$(CONFIG_ARLAN) += arlan.o arlan-proc.o obj-$(CONFIG_ARLAN) += arlan.o arlan-proc.o
obj-$(CONFIG_ZNET) += znet.o obj-$(CONFIG_ZNET) += znet.o
obj-$(CONFIG_LAN_SAA9730) += saa9730.o obj-$(CONFIG_LAN_SAA9730) += saa9730.o
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment