Commit b70a6b27 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (33 commits)
  MIPS: lemote/lm2e: Added io_map_base to pci controller
  MIPS: TXx9: Make firmware parameter passing more robust
  MIPS: Markeins: Remove unnecessary define and cleanup comments, etc.
  MIPS: Markeins: Extract ll_emma2rh_* functions
  MIPS: Markeins: Remove runtime debug prints
  MIPS: EMMA: Fold arch/mips/emma/{common,markeins}/irq*.c into markeins/irq.c
  MIPS: EMMA2RH: Remove emma2rh_gpio_irq_base
  MIPS: EMMA2RH: Remove emma2rh_sw_irq_base
  MIPS: EMMA2RH: Remove emma2rh_irq_base global variable
  MIPS: EMMA2RH: Remove emma2rh_sync on read operation
  MIPS: EMMA: Move <asm/emma2rh> to <asm/emma> dir
  MIPS: EMMA: Move arch/mips/emma2rh/ into arch/mips/emma/
  MIPS: EMMA: Kconfig reorganization
  MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processors
  MIPS: RB532: Disable the right device
  MIPS: Add support for NXP PNX833x (STB222/5) into linux kernel
  MIPS: TXx9: CONFIG_TOSHIBA_RBTX4939 spelling
  MIPS: Fix KGDB build error
  INPUT: sgi_btns: Add license specification
  MIPS: IP22: ip22-int.c header file weeding.
  ...
parents 1d63e726 3a63913f
......@@ -238,21 +238,8 @@ config MIPS_SIM
This option enables support for MIPS Technologies MIPSsim software
emulator.
config MARKEINS
bool "NEC EMMA2RH Mark-eins"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_CPU_R5000
help
This enables support for the R5432-based NEC Mark-eins
boards with R5500 CPU.
config MACH_EMMA
bool "NEC EMMA series based machines"
config MACH_VR41XX
bool "NEC VR4100 series based machines"
......@@ -261,6 +248,19 @@ config MACH_VR41XX
select SYS_HAS_CPU_VR41XX
select GENERIC_HARDIRQS_NO__DO_IRQ
config NXP_STB220
bool "NXP STB220 board"
select SOC_PNX833X
help
Support for NXP Semiconductors STB220 Development Board.
config NXP_STB225
bool "NXP 225 board"
select SOC_PNX833X
select SOC_PNX8335
help
Support for NXP Semiconductors STB225 Development Board.
config PNX8550_JBS
bool "NXP PNX8550 based JBS board"
select PNX8550
......@@ -601,6 +601,7 @@ endchoice
source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/emma/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
......@@ -849,6 +850,24 @@ config MIPS_RM9122
bool
select SERIAL_RM9000
config SOC_PNX833X
bool
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
select DMA_NONCOHERENT
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select GENERIC_HARDIRQS_NO__DO_IRQ
select GENERIC_GPIO
select CPU_MIPSR2_IRQ_VI
config SOC_PNX8335
bool
select SOC_PNX833X
config PNX8550
bool
select SOC_PNX8550
......@@ -1092,6 +1111,16 @@ config CPU_R5432
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
config CPU_R5500
bool "R5500"
depends on SYS_HAS_CPU_R5500
select CPU_HAS_LLSC
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
help
NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
instruction set.
config CPU_R6000
bool "R6000"
depends on EXPERIMENTAL
......@@ -1202,6 +1231,9 @@ config SYS_HAS_CPU_R5000
config SYS_HAS_CPU_R5432
bool
config SYS_HAS_CPU_R5500
bool
config SYS_HAS_CPU_R6000
bool
......
......@@ -131,6 +131,8 @@ cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_
cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap
cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \
......@@ -381,6 +383,14 @@ load-$(CONFIG_CASIO_E55) += 0xffffffff80004000
#
load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000
# NXP STB225
core-$(CONFIG_SOC_PNX833X) += arch/mips/nxp/pnx833x/common/
cflags-$(CONFIG_SOC_PNX833X) += -Iarch/mips/include/asm/mach-pnx833x
libs-$(CONFIG_NXP_STB220) += arch/mips/nxp/pnx833x/stb22x/
load-$(CONFIG_NXP_STB220) += 0xffffffff80001000
libs-$(CONFIG_NXP_STB225) += arch/mips/nxp/pnx833x/stb22x/
load-$(CONFIG_NXP_STB225) += 0xffffffff80001000
#
# Common NXP PNX8550
#
......@@ -399,14 +409,17 @@ load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000
libs-$(CONFIG_PNX8550_STB810) += arch/mips/nxp/pnx8550/stb810/
load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000
# NEC EMMA2RH boards
#
core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/
cflags-$(CONFIG_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
# Common NEC EMMAXXX
#
core-$(CONFIG_SOC_EMMA) += arch/mips/emma/common/
cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
#
# NEC EMMA2RH Mark-eins
core-$(CONFIG_MARKEINS) += arch/mips/emma2rh/markeins/
load-$(CONFIG_MARKEINS) += 0xffffffff88100000
#
core-$(CONFIG_NEC_MARKEINS) += arch/mips/emma/markeins/
load-$(CONFIG_NEC_MARKEINS) += 0xffffffff88100000
#
# SGI IP22 (Indy/Indigo2)
......
......@@ -17,6 +17,8 @@
#include <linux/init.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
#define PORT(_base, _irq) \
{ \
......@@ -163,24 +165,6 @@ static struct resource au1xxx_usb_gdt_resources[] = {
},
};
static struct resource au1xxx_mmc_resources[] = {
[0] = {
.start = SD0_PHYS_ADDR,
.end = SD0_PHYS_ADDR + 0x7ffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = SD1_PHYS_ADDR,
.end = SD1_PHYS_ADDR + 0x7ffff,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = AU1200_SD_INT,
.end = AU1200_SD_INT,
.flags = IORESOURCE_IRQ,
}
};
static u64 udc_dmamask = DMA_32BIT_MASK;
static struct platform_device au1xxx_usb_gdt_device = {
......@@ -249,16 +233,79 @@ static struct platform_device au1200_lcd_device = {
static u64 au1xxx_mmc_dmamask = DMA_32BIT_MASK;
static struct platform_device au1xxx_mmc_device = {
extern struct au1xmmc_platform_data au1xmmc_platdata[2];
static struct resource au1200_mmc0_resources[] = {
[0] = {
.start = SD0_PHYS_ADDR,
.end = SD0_PHYS_ADDR + 0x7ffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1200_SD_INT,
.end = AU1200_SD_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = DSCR_CMD0_SDMS_TX0,
.end = DSCR_CMD0_SDMS_TX0,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = DSCR_CMD0_SDMS_RX0,
.end = DSCR_CMD0_SDMS_RX0,
.flags = IORESOURCE_DMA,
}
};
static struct platform_device au1200_mmc0_device = {
.name = "au1xxx-mmc",
.id = 0,
.dev = {
.dma_mask = &au1xxx_mmc_dmamask,
.coherent_dma_mask = DMA_32BIT_MASK,
.dma_mask = &au1xxx_mmc_dmamask,
.coherent_dma_mask = DMA_32BIT_MASK,
.platform_data = &au1xmmc_platdata[0],
},
.num_resources = ARRAY_SIZE(au1xxx_mmc_resources),
.resource = au1xxx_mmc_resources,
.num_resources = ARRAY_SIZE(au1200_mmc0_resources),
.resource = au1200_mmc0_resources,
};
#ifndef CONFIG_MIPS_DB1200
static struct resource au1200_mmc1_resources[] = {
[0] = {
.start = SD1_PHYS_ADDR,
.end = SD1_PHYS_ADDR + 0x7ffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1200_SD_INT,
.end = AU1200_SD_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = DSCR_CMD0_SDMS_TX1,
.end = DSCR_CMD0_SDMS_TX1,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = DSCR_CMD0_SDMS_RX1,
.end = DSCR_CMD0_SDMS_RX1,
.flags = IORESOURCE_DMA,
}
};
static struct platform_device au1200_mmc1_device = {
.name = "au1xxx-mmc",
.id = 1,
.dev = {
.dma_mask = &au1xxx_mmc_dmamask,
.coherent_dma_mask = DMA_32BIT_MASK,
.platform_data = &au1xmmc_platdata[1],
},
.num_resources = ARRAY_SIZE(au1200_mmc1_resources),
.resource = au1200_mmc1_resources,
};
#endif /* #ifndef CONFIG_MIPS_DB1200 */
#endif /* #ifdef CONFIG_SOC_AU1200 */
static struct platform_device au1x00_pcmcia_device = {
......@@ -296,7 +343,10 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1xxx_usb_gdt_device,
&au1xxx_usb_otg_device,
&au1200_lcd_device,
&au1xxx_mmc_device,
&au1200_mmc0_device,
#ifndef CONFIG_MIPS_DB1200
&au1200_mmc1_device,
#endif
#endif
#ifdef SMBUS_PSC_BASE
&pbdb_smbus_device,
......
......@@ -20,9 +20,90 @@
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1100_mmc.h>
static int mmc_activity;
static void pb1200mmc0_set_power(void *mmc_host, int state)
{
if (state)
bcsr->board |= BCSR_BOARD_SD0PWR;
else
bcsr->board &= ~BCSR_BOARD_SD0PWR;
au_sync_delay(1);
}
static int pb1200mmc0_card_readonly(void *mmc_host)
{
return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0;
}
static int pb1200mmc0_card_inserted(void *mmc_host)
{
return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0;
}
static void pb1200_mmcled_set(struct led_classdev *led,
enum led_brightness brightness)
{
if (brightness != LED_OFF) {
if (++mmc_activity == 1)
bcsr->disk_leds &= ~(1 << 8);
} else {
if (--mmc_activity == 0)
bcsr->disk_leds |= (1 << 8);
}
}
static struct led_classdev pb1200mmc_led = {
.brightness_set = pb1200_mmcled_set,
};
#ifndef CONFIG_MIPS_DB1200
static void pb1200mmc1_set_power(void *mmc_host, int state)
{
if (state)
bcsr->board |= BCSR_BOARD_SD1PWR;
else
bcsr->board &= ~BCSR_BOARD_SD1PWR;
au_sync_delay(1);
}
static int pb1200mmc1_card_readonly(void *mmc_host)
{
return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0;
}
static int pb1200mmc1_card_inserted(void *mmc_host)
{
return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0;
}
#endif
const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
[0] = {
.set_power = pb1200mmc0_set_power,
.card_inserted = pb1200mmc0_card_inserted,
.card_readonly = pb1200mmc0_card_readonly,
.cd_setup = NULL, /* use poll-timer in driver */
.led = &pb1200mmc_led,
},
#ifndef CONFIG_MIPS_DB1200
[1] = {
.set_power = pb1200mmc1_set_power,
.card_inserted = pb1200mmc1_card_inserted,
.card_readonly = pb1200mmc1_card_readonly,
.cd_setup = NULL, /* use poll-timer in driver */
.led = &pb1200mmc_led,
},
#endif
};
static struct resource ide_resources[] = {
[0] = {
......
This diff is collapsed.
choice
prompt "Machine type"
depends on MACH_EMMA
default NEC_MARKEINS
config NEC_MARKEINS
bool "NEC EMMA2RH Mark-eins board"
select SOC_EMMA2RH
select HW_HAS_PCI
help
This enables support for the NEC Electronics Mark-eins boards.
endchoice
config SOC_EMMA2RH
bool
select SOC_EMMA
select SYS_HAS_CPU_R5500
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
config SOC_EMMA
bool
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select SWAP_IO_SPACE
select SYS_SUPPORTS_BIG_ENDIAN
......@@ -10,4 +10,4 @@
# (at your option) any later version.
#
obj-$(CONFIG_MARKEINS) += irq.o irq_emma2rh.o prom.o
obj-$(CONFIG_NEC_MARKEINS) += prom.o
......@@ -29,11 +29,11 @@
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/emma2rh/emma2rh.h>
#include <asm/emma/emma2rh.h>
const char *get_system_type(void)
{
#if defined(CONFIG_MARKEINS)
#ifdef CONFIG_NEC_MARKEINS
return "NEC EMMA2RH Mark-eins";
#else
#error Unknown NEC board
......@@ -60,7 +60,7 @@ void __init prom_init(void)
strcat(arcs_cmdline, " ");
}
#if defined(CONFIG_MARKEINS)
#ifdef CONFIG_NEC_MARKEINS
add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM);
#else
#error Unknown NEC board
......
......@@ -10,4 +10,4 @@
# (at your option) any later version.
#
obj-$(CONFIG_MARKEINS) += irq.o irq_markeins.o setup.o led.o platform.o
obj-$(CONFIG_NEC_MARKEINS) += irq.o setup.o led.o platform.o
......@@ -32,31 +32,164 @@
#include <asm/irq_cpu.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
#include <asm/debug.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/emma2rh/emma2rh.h>
#include <asm/emma/emma2rh.h>
/*
* IRQ mapping
*
* 0-7: 8 CPU interrupts
* 0 - software interrupt 0
* 1 - software interrupt 1
* 2 - most Vrc5477 interrupts are routed to this pin
* 3 - (optional) some other interrupts routed to this pin for debugg
* 4 - not used
* 5 - not used
* 6 - not used
* 7 - cpu timer (used by default)
*
*/
static void emma2rh_irq_enable(unsigned int irq)
{
u32 reg_value;
u32 reg_bitmask;
u32 reg_index;
irq -= EMMA2RH_IRQ_BASE;
reg_index = EMMA2RH_BHIF_INT_EN_0 +
(EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32);
reg_value = emma2rh_in32(reg_index);
reg_bitmask = 0x1 << (irq % 32);
emma2rh_out32(reg_index, reg_value | reg_bitmask);
}
static void emma2rh_irq_disable(unsigned int irq)
{
u32 reg_value;
u32 reg_bitmask;
u32 reg_index;
irq -= EMMA2RH_IRQ_BASE;
reg_index = EMMA2RH_BHIF_INT_EN_0 +
(EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32);
reg_value = emma2rh_in32(reg_index);
reg_bitmask = 0x1 << (irq % 32);
emma2rh_out32(reg_index, reg_value & ~reg_bitmask);
}
struct irq_chip emma2rh_irq_controller = {
.name = "emma2rh_irq",
.ack = emma2rh_irq_disable,
.mask = emma2rh_irq_disable,
.mask_ack = emma2rh_irq_disable,
.unmask = emma2rh_irq_enable,
};
void emma2rh_irq_init(void)
{
u32 i;
for (i = 0; i < NUM_EMMA2RH_IRQ; i++)
set_irq_chip_and_handler(EMMA2RH_IRQ_BASE + i,
&emma2rh_irq_controller,
handle_level_irq);
}
static void emma2rh_sw_irq_enable(unsigned int irq)
{
u32 reg;
irq -= EMMA2RH_SW_IRQ_BASE;
reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
reg |= 1 << irq;
emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
}
static void emma2rh_sw_irq_disable(unsigned int irq)
{
u32 reg;
irq -= EMMA2RH_SW_IRQ_BASE;
reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
reg &= ~(1 << irq);
emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
}
struct irq_chip emma2rh_sw_irq_controller = {
.name = "emma2rh_sw_irq",
.ack = emma2rh_sw_irq_disable,
.mask = emma2rh_sw_irq_disable,
.mask_ack = emma2rh_sw_irq_disable,
.unmask = emma2rh_sw_irq_enable,
};
void emma2rh_sw_irq_init(void)
{
u32 i;
for (i = 0; i < NUM_EMMA2RH_IRQ_SW; i++)
set_irq_chip_and_handler(EMMA2RH_SW_IRQ_BASE + i,
&emma2rh_sw_irq_controller,
handle_level_irq);
}
static void emma2rh_gpio_irq_enable(unsigned int irq)
{
u32 reg;
irq -= EMMA2RH_GPIO_IRQ_BASE;
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
reg |= 1 << irq;
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
}
static void emma2rh_gpio_irq_disable(unsigned int irq)
{
u32 reg;
irq -= EMMA2RH_GPIO_IRQ_BASE;
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
reg &= ~(1 << irq);
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
}
static void emma2rh_gpio_irq_ack(unsigned int irq)
{
u32 reg;
extern void emma2rh_sw_irq_init(u32 base);
extern void emma2rh_gpio_irq_init(u32 base);
extern void emma2rh_irq_init(u32 base);
extern void emma2rh_irq_dispatch(void);
irq -= EMMA2RH_GPIO_IRQ_BASE;
emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq));
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
reg &= ~(1 << irq);
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
}
static void emma2rh_gpio_irq_end(unsigned int irq)
{
u32 reg;
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
irq -= EMMA2RH_GPIO_IRQ_BASE;
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
reg |= 1 << irq;
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
}
}
struct irq_chip emma2rh_gpio_irq_controller = {
.name = "emma2rh_gpio_irq",
.ack = emma2rh_gpio_irq_ack,
.mask = emma2rh_gpio_irq_disable,
.mask_ack = emma2rh_gpio_irq_ack,
.unmask = emma2rh_gpio_irq_enable,
.end = emma2rh_gpio_irq_end,
};
void emma2rh_gpio_irq_init(void)
{
u32 i;
for (i = 0; i < NUM_EMMA2RH_IRQ_GPIO; i++)
set_irq_chip(EMMA2RH_GPIO_IRQ_BASE + i,
&emma2rh_gpio_irq_controller);
}
static struct irqaction irq_cascade = {
.handler = no_action,
......@@ -67,12 +200,80 @@ static struct irqaction irq_cascade = {
.next = NULL,
};
/*
* the first level int-handler will jump here if it is a emma2rh irq
*/
void emma2rh_irq_dispatch(void)
{
u32 intStatus;
u32 bitmask;
u32 i;
intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) &
emma2rh_in32(EMMA2RH_BHIF_INT_EN_0);
#ifdef EMMA2RH_SW_CASCADE
if (intStatus &
(1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
u32 swIntStatus;
swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT)
& emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
if (swIntStatus & bitmask) {
do_IRQ(EMMA2RH_SW_IRQ_BASE + i);
return;
}
}
}
#endif
for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
if (intStatus & bitmask) {
do_IRQ(EMMA2RH_IRQ_BASE + i);
return;
}
}
intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) &
emma2rh_in32(EMMA2RH_BHIF_INT_EN_1);
#ifdef EMMA2RH_GPIO_CASCADE
if (intStatus &
(1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
u32 gpioIntStatus;
gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST)
& emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
if (gpioIntStatus & bitmask) {
do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i);
return;
}
}
}
#endif
for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) {
if (intStatus & bitmask) {
do_IRQ(EMMA2RH_IRQ_BASE + i);
return;
}
}
intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) &
emma2rh_in32(EMMA2RH_BHIF_INT_EN_2);
for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) {
if (intStatus & bitmask) {
do_IRQ(EMMA2RH_IRQ_BASE + i);
return;
}
}
}
void __init arch_init_irq(void)
{
u32 reg;
db_run(printk("markeins_irq_setup invoked.\n"));
/* by default, interrupts are disabled. */
emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0);
......@@ -102,9 +303,9 @@ void __init arch_init_irq(void)
emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI);
/* init all controllers */
emma2rh_irq_init(EMMA2RH_IRQ_BASE);
emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE);
emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE);
emma2rh_irq_init();
emma2rh_sw_irq_init();
emma2rh_gpio_irq_init();
mips_cpu_irq_init();
/* setup cascade interrupts */
......@@ -128,5 +329,3 @@ asmlinkage void plat_irq_dispatch(void)
else
spurious_interrupt();
}
......@@ -21,7 +21,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/string.h>
#include <asm/emma2rh/emma2rh.h>
#include <asm/emma/emma2rh.h>
const unsigned long clear = 0x20202020;
......
......@@ -36,7 +36,7 @@
#include <asm/reboot.h>
#include <asm/traps.h>
#include <asm/emma2rh/emma2rh.h>
#include <asm/emma/emma2rh.h>
#define I2C_EMMA2RH "emma2rh-iic" /* must be in sync with IIC driver */
......
......@@ -29,7 +29,7 @@
#include <asm/time.h>
#include <asm/reboot.h>
#include <asm/emma2rh/emma2rh.h>
#include <asm/emma/emma2rh.h>
#define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */
......
/*
* arch/mips/emma2rh/common/irq.c
* This file is common irq dispatcher.
*
* Copyright (C) NEC Electronics Corporation 2005-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/types.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/emma2rh/emma2rh.h>
/*
* the first level int-handler will jump here if it is a emma2rh irq
*/
void emma2rh_irq_dispatch(void)
{
u32 intStatus;
u32 bitmask;
u32 i;
intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0)
& emma2rh_in32(EMMA2RH_BHIF_INT_EN_0);
#ifdef EMMA2RH_SW_CASCADE
if (intStatus &
(1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
u32 swIntStatus;
swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT)
& emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
if (swIntStatus & bitmask) {
do_IRQ(EMMA2RH_SW_IRQ_BASE + i);
return;
}
}
}
#endif
for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
if (intStatus & bitmask) {
do_IRQ(EMMA2RH_IRQ_BASE + i);
return;
}
}
intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1)
& emma2rh_in32(EMMA2RH_BHIF_INT_EN_1);
#ifdef EMMA2RH_GPIO_CASCADE
if (intStatus &
(1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
u32 gpioIntStatus;
gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST)
& emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
if (gpioIntStatus & bitmask) {
do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i);
return;
}
}
}
#endif
for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) {
if (intStatus & bitmask) {
do_IRQ(EMMA2RH_IRQ_BASE + i);
return;
}
}
intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2)
& emma2rh_in32(EMMA2RH_BHIF_INT_EN_2);
for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) {
if (intStatus & bitmask) {
do_IRQ(EMMA2RH_IRQ_BASE + i);
return;
}
}
}
/*
* arch/mips/emma2rh/common/irq_emma2rh.c
* This file defines the irq handler for EMMA2RH.
*
* Copyright (C) NEC Electronics Corporation 2005-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* EMMA2RH defines 64 IRQs.
*
* This file exports one function:
* emma2rh_irq_init(u32 irq_base);
*/
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
/* number of total irqs supported by EMMA2RH */
#define NUM_EMMA2RH_IRQ 96
static int emma2rh_irq_base = -1;
void ll_emma2rh_irq_enable(int);
void ll_emma2rh_irq_disable(int);
static void emma2rh_irq_enable(unsigned int irq)
{
ll_emma2rh_irq_enable(irq - emma2rh_irq_base);
}
static void emma2rh_irq_disable(unsigned int irq)
{
ll_emma2rh_irq_disable(irq - emma2rh_irq_base);
}
struct irq_chip emma2rh_irq_controller = {
.name = "emma2rh_irq",
.ack = emma2rh_irq_disable,
.mask = emma2rh_irq_disable,
.mask_ack = emma2rh_irq_disable,
.unmask = emma2rh_irq_enable,
};
void emma2rh_irq_init(u32 irq_base)
{
u32 i;
for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ; i++)
set_irq_chip_and_handler(i, &emma2rh_irq_controller,
handle_level_irq);
emma2rh_irq_base = irq_base;
}
void ll_emma2rh_irq_enable(int emma2rh_irq)
{
u32 reg_value;
u32 reg_bitmask;
u32 reg_index;
reg_index = EMMA2RH_BHIF_INT_EN_0
+ (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0)
* (emma2rh_irq / 32);
reg_value = emma2rh_in32(reg_index);
reg_bitmask = 0x1 << (emma2rh_irq % 32);
db_assert((reg_value & reg_bitmask) == 0);
emma2rh_out32(reg_index, reg_value | reg_bitmask);
}
void ll_emma2rh_irq_disable(int emma2rh_irq)
{
u32 reg_value;
u32 reg_bitmask;
u32 reg_index;
reg_index = EMMA2RH_BHIF_INT_EN_0
+ (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0)
* (emma2rh_irq / 32);
reg_value = emma2rh_in32(reg_index);
reg_bitmask = 0x1 << (emma2rh_irq % 32);
db_assert((reg_value & reg_bitmask) != 0);
emma2rh_out32(reg_index, reg_value & ~reg_bitmask);
}
/*
* arch/mips/emma2rh/markeins/irq_markeins.c
* This file defines the irq handler for Mark-eins.
*
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c
*
* Copyright 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
static int emma2rh_sw_irq_base = -1;
static int emma2rh_gpio_irq_base = -1;
void ll_emma2rh_sw_irq_enable(int reg);
void ll_emma2rh_sw_irq_disable(int reg);
void ll_emma2rh_gpio_irq_enable(int reg);
void ll_emma2rh_gpio_irq_disable(int reg);
static void emma2rh_sw_irq_enable(unsigned int irq)
{
ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base);
}
static void emma2rh_sw_irq_disable(unsigned int irq)
{
ll_emma2rh_sw_irq_disable(irq - emma2rh_sw_irq_base);
}
struct irq_chip emma2rh_sw_irq_controller = {
.name = "emma2rh_sw_irq",
.ack = emma2rh_sw_irq_disable,
.mask = emma2rh_sw_irq_disable,
.mask_ack = emma2rh_sw_irq_disable,
.unmask = emma2rh_sw_irq_enable,
};
void emma2rh_sw_irq_init(u32 irq_base)
{
u32 i;
for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_SW; i++)
set_irq_chip_and_handler(i, &emma2rh_sw_irq_controller,
handle_level_irq);
emma2rh_sw_irq_base = irq_base;
}
void ll_emma2rh_sw_irq_enable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < NUM_EMMA2RH_IRQ_SW);
reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
reg |= 1 << irq;
emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
}
void ll_emma2rh_sw_irq_disable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < 32);
reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
reg &= ~(1 << irq);
emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
}
static void emma2rh_gpio_irq_enable(unsigned int irq)
{
ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base);
}
static void emma2rh_gpio_irq_disable(unsigned int irq)
{
ll_emma2rh_gpio_irq_disable(irq - emma2rh_gpio_irq_base);
}
static void emma2rh_gpio_irq_ack(unsigned int irq)
{
irq -= emma2rh_gpio_irq_base;
emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq));
ll_emma2rh_gpio_irq_disable(irq);
}
static void emma2rh_gpio_irq_end(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base);
}
struct irq_chip emma2rh_gpio_irq_controller = {
.name = "emma2rh_gpio_irq",
.ack = emma2rh_gpio_irq_ack,
.mask = emma2rh_gpio_irq_disable,
.mask_ack = emma2rh_gpio_irq_ack,
.unmask = emma2rh_gpio_irq_enable,
.end = emma2rh_gpio_irq_end,
};
void emma2rh_gpio_irq_init(u32 irq_base)
{
u32 i;
for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_GPIO; i++)
set_irq_chip(i, &emma2rh_gpio_irq_controller);
emma2rh_gpio_irq_base = irq_base;
}
void ll_emma2rh_gpio_irq_enable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
reg |= 1 << irq;
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
}
void ll_emma2rh_gpio_irq_disable(int irq)
{
u32 reg;
db_assert(irq >= 0);
db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
reg &= ~(1 << irq);
emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
}
/*
* include/asm-mips/emma2rh/emma2rh.h
* arch/mips/include/asm/emma/emma2rh.h
* This file is EMMA2RH common header.
*
* Copyright (C) NEC Electronics Corporation 2005-2006
......@@ -21,8 +21,8 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_EMMA2RH_EMMA2RH_H
#define __ASM_EMMA2RH_EMMA2RH_H
#ifndef __ASM_EMMA_EMMA2RH_H
#define __ASM_EMMA_EMMA2RH_H
#include <irq.h>
......@@ -206,7 +206,6 @@ static inline void emma2rh_out32(u32 offset, u32 val)
static inline u32 emma2rh_in32(u32 offset)
{
u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset);
emma2rh_sync();
return val;
}
......@@ -219,7 +218,6 @@ static inline void emma2rh_out16(u32 offset, u16 val)
static inline u16 emma2rh_in16(u32 offset)
{
u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset);
emma2rh_sync();
return val;
}
......@@ -232,7 +230,6 @@ static inline void emma2rh_out8(u32 offset, u8 val)
static inline u8 emma2rh_in8(u32 offset)
{
u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset);
emma2rh_sync();
return val;
}
......@@ -324,10 +321,10 @@ static inline u8 emma2rh_in8(u32 offset)
/*
* include the board dependent part
*/
#if defined(CONFIG_MARKEINS)
#include <asm/emma2rh/markeins.h>
#ifdef CONFIG_NEC_MARKEINS
#include <asm/emma/markeins.h>
#else
#error "Unknown EMMA2RH board!"
#endif
#endif /* __ASM_EMMA2RH_EMMA2RH_H */
#endif /* __ASM_EMMA_EMMA2RH_H */
/*
* Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
*
* This program is free software; you can redistribute it
* and/or modify it under the terms of the GNU General
* Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be
* useful, but WITHOUT ANY WARRANTY; without even the implied
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the Free
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
* 02139, USA.
*/
#ifndef _LEMOTE_PCI_H_
#define _LEMOTE_PCI_H_
#define LOONGSON2E_PCI_MEM_START 0x14000000UL
#define LOONGSON2E_PCI_MEM_END 0x1fffffffUL
#define LOONGSON2E_PCI_IO_START 0x00004000UL
#define LOONGSON2E_IO_PORT_BASE 0x1fd00000UL
#endif /* !_LEMOTE_PCI_H_ */
/*
* gpio.h: GPIO Support for PNX833X.
*
* Copyright 2008 NXP Semiconductors
* Chris Steel <chris.steel@nxp.com>
* Daniel Laird <daniel.j.laird@nxp.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_MIPS_MACH_PNX833X_GPIO_H
#define __ASM_MIPS_MACH_PNX833X_GPIO_H
/* BIG FAT WARNING: races danger!
No protections exist here. Current users are only early init code,
when locking is not needed because no cuncurency yet exists there,
and GPIO IRQ dispatcher, which does locking.
However, if many uses will ever happen, proper locking will be needed
- including locking between different uses
*/
#include "pnx833x.h"
#define SET_REG_BIT(reg, bit) do { (reg |= (1 << (bit))); } while (0)
#define CLEAR_REG_BIT(reg, bit) do { (reg &= ~(1 << (bit))); } while (0)
/* Initialize GPIO to a known state */
static inline void pnx833x_gpio_init(void)
{
PNX833X_PIO_DIR = 0;
PNX833X_PIO_DIR2 = 0;
PNX833X_PIO_SEL = 0;
PNX833X_PIO_SEL2 = 0;
PNX833X_PIO_INT_EDGE = 0;
PNX833X_PIO_INT_HI = 0;
PNX833X_PIO_INT_LO = 0;
/* clear any GPIO interrupt requests */
PNX833X_PIO_INT_CLEAR = 0xffff;
PNX833X_PIO_INT_CLEAR = 0;
PNX833X_PIO_INT_ENABLE = 0;
}
/* Select GPIO direction for a pin */
static inline void pnx833x_gpio_select_input(unsigned int pin)
{
if (pin < 32)
CLEAR_REG_BIT(PNX833X_PIO_DIR, pin);
else
CLEAR_REG_BIT(PNX833X_PIO_DIR2, pin & 31);
}
static inline void pnx833x_gpio_select_output(unsigned int pin)
{
if (pin < 32)
SET_REG_BIT(PNX833X_PIO_DIR, pin);
else
SET_REG_BIT(PNX833X_PIO_DIR2, pin & 31);
}
/* Select GPIO or alternate function for a pin */
static inline void pnx833x_gpio_select_function_io(unsigned int pin)
{
if (pin < 32)
CLEAR_REG_BIT(PNX833X_PIO_SEL, pin);
else
CLEAR_REG_BIT(PNX833X_PIO_SEL2, pin & 31);
}
static inline void pnx833x_gpio_select_function_alt(unsigned int pin)
{
if (pin < 32)
SET_REG_BIT(PNX833X_PIO_SEL, pin);
else
SET_REG_BIT(PNX833X_PIO_SEL2, pin & 31);
}
/* Read GPIO pin */
static inline int pnx833x_gpio_read(unsigned int pin)
{
if (pin < 32)
return (PNX833X_PIO_IN >> pin) & 1;
else
return (PNX833X_PIO_IN2 >> (pin & 31)) & 1;
}
/* Write GPIO pin */
static inline void pnx833x_gpio_write(unsigned int val, unsigned int pin)
{
if (pin < 32) {
if (val)
SET_REG_BIT(PNX833X_PIO_OUT, pin);
else
CLEAR_REG_BIT(PNX833X_PIO_OUT, pin);
} else {
if (val)
SET_REG_BIT(PNX833X_PIO_OUT2, pin & 31);
else
CLEAR_REG_BIT(PNX833X_PIO_OUT2, pin & 31);
}
}
/* Configure GPIO interrupt */
#define GPIO_INT_NONE 0
#define GPIO_INT_LEVEL_LOW 1
#define GPIO_INT_LEVEL_HIGH 2
#define GPIO_INT_EDGE_RISING 3
#define GPIO_INT_EDGE_FALLING 4
#define GPIO_INT_EDGE_BOTH 5
static inline void pnx833x_gpio_setup_irq(int when, unsigned int pin)
{
switch (when) {
case GPIO_INT_LEVEL_LOW:
CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin);
SET_REG_BIT(PNX833X_PIO_INT_LO, pin);
break;
case GPIO_INT_LEVEL_HIGH:
CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
SET_REG_BIT(PNX833X_PIO_INT_HI, pin);
CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin);
break;
case GPIO_INT_EDGE_RISING:
SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
SET_REG_BIT(PNX833X_PIO_INT_HI, pin);
CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin);
break;
case GPIO_INT_EDGE_FALLING:
SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin);
SET_REG_BIT(PNX833X_PIO_INT_LO, pin);
break;
case GPIO_INT_EDGE_BOTH:
SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
SET_REG_BIT(PNX833X_PIO_INT_HI, pin);
SET_REG_BIT(PNX833X_PIO_INT_LO, pin);
break;
default:
CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin);
CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin);
break;
}
}
/* Enable/disable GPIO interrupt */
static inline void pnx833x_gpio_enable_irq(unsigned int pin)
{
SET_REG_BIT(PNX833X_PIO_INT_ENABLE, pin);
}
static inline void pnx833x_gpio_disable_irq(unsigned int pin)
{
CLEAR_REG_BIT(PNX833X_PIO_INT_ENABLE, pin);
}
/* Clear GPIO interrupt request */
static inline void pnx833x_gpio_clear_irq(unsigned int pin)
{
SET_REG_BIT(PNX833X_PIO_INT_CLEAR, pin);
CLEAR_REG_BIT(PNX833X_PIO_INT_CLEAR, pin);
}
#endif
/*
* irq.h: IRQ mappings for PNX833X.
*
* Copyright 2008 NXP Semiconductors
* Chris Steel <chris.steel@nxp.com>
* Daniel Laird <daniel.j.laird@nxp.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H
#define __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H
/*
* The "IRQ numbers" are completely virtual.
*
* In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48.
* Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt,
* numbers 49..64 for (virtual) GPIO interrupts.
*
* In PNX8335, we have 57 interrupt lines, numbered from 1 to 57,
* connected to PIC, which uses core hardware interrupt 2, and also
* a timer interrupt through hardware interrupt 5.
* Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt,
* numbers 65..80 for (virtual) GPIO interrupts.
*
*/
#include <irq.h>
#define PNX833X_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7)
/* Interrupts supported by PIC */
#define PNX833X_PIC_I2C0_INT (PNX833X_PIC_IRQ_BASE + 1)
#define PNX833X_PIC_I2C1_INT (PNX833X_PIC_IRQ_BASE + 2)
#define PNX833X_PIC_UART0_INT (PNX833X_PIC_IRQ_BASE + 3)
#define PNX833X_PIC_UART1_INT (PNX833X_PIC_IRQ_BASE + 4)
#define PNX833X_PIC_TS_IN0_DV_INT (PNX833X_PIC_IRQ_BASE + 5)
#define PNX833X_PIC_TS_IN0_DMA_INT (PNX833X_PIC_IRQ_BASE + 6)
#define PNX833X_PIC_GPIO_INT (PNX833X_PIC_IRQ_BASE + 7)
#define PNX833X_PIC_AUDIO_DEC_INT (PNX833X_PIC_IRQ_BASE + 8)
#define PNX833X_PIC_VIDEO_DEC_INT (PNX833X_PIC_IRQ_BASE + 9)
#define PNX833X_PIC_CONFIG_INT (PNX833X_PIC_IRQ_BASE + 10)
#define PNX833X_PIC_AOI_INT (PNX833X_PIC_IRQ_BASE + 11)
#define PNX833X_PIC_SYNC_INT (PNX833X_PIC_IRQ_BASE + 12)
#define PNX8330_PIC_SPU_INT (PNX833X_PIC_IRQ_BASE + 13)
#define PNX8335_PIC_SATA_INT (PNX833X_PIC_IRQ_BASE + 13)
#define PNX833X_PIC_OSD_INT (PNX833X_PIC_IRQ_BASE + 14)
#define PNX833X_PIC_DISP1_INT (PNX833X_PIC_IRQ_BASE + 15)
#define PNX833X_PIC_DEINTERLACER_INT (PNX833X_PIC_IRQ_BASE + 16)
#define PNX833X_PIC_DISPLAY2_INT (PNX833X_PIC_IRQ_BASE + 17)
#define PNX833X_PIC_VC_INT (PNX833X_PIC_IRQ_BASE + 18)
#define PNX833X_PIC_SC_INT (PNX833X_PIC_IRQ_BASE + 19)
#define PNX833X_PIC_IDE_INT (PNX833X_PIC_IRQ_BASE + 20)
#define PNX833X_PIC_IDE_DMA_INT (PNX833X_PIC_IRQ_BASE + 21)
#define PNX833X_PIC_TS_IN1_DV_INT (PNX833X_PIC_IRQ_BASE + 22)
#define PNX833X_PIC_TS_IN1_DMA_INT (PNX833X_PIC_IRQ_BASE + 23)
#define PNX833X_PIC_SGDX_DMA_INT (PNX833X_PIC_IRQ_BASE + 24)
#define PNX833X_PIC_TS_OUT_INT (PNX833X_PIC_IRQ_BASE + 25)
#define PNX833X_PIC_IR_INT (PNX833X_PIC_IRQ_BASE + 26)
#define PNX833X_PIC_VMSP1_INT (PNX833X_PIC_IRQ_BASE + 27)
#define PNX833X_PIC_VMSP2_INT (PNX833X_PIC_IRQ_BASE + 28)
#define PNX833X_PIC_PIBC_INT (PNX833X_PIC_IRQ_BASE + 29)
#define PNX833X_PIC_TS_IN0_TRD_INT (PNX833X_PIC_IRQ_BASE + 30)
#define PNX833X_PIC_SGDX_TPD_INT (PNX833X_PIC_IRQ_BASE + 31)
#define PNX833X_PIC_USB_INT (PNX833X_PIC_IRQ_BASE + 32)
#define PNX833X_PIC_TS_IN1_TRD_INT (PNX833X_PIC_IRQ_BASE + 33)
#define PNX833X_PIC_CLOCK_INT (PNX833X_PIC_IRQ_BASE + 34)
#define PNX833X_PIC_SGDX_PARSER_INT (PNX833X_PIC_IRQ_BASE + 35)
#define PNX833X_PIC_VMSP_DMA_INT (PNX833X_PIC_IRQ_BASE + 36)
#if defined(CONFIG_SOC_PNX8335)
#define PNX8335_PIC_MIU_INT (PNX833X_PIC_IRQ_BASE + 37)
#define PNX8335_PIC_AVCHIP_IRQ_INT (PNX833X_PIC_IRQ_BASE + 38)
#define PNX8335_PIC_SYNC_HD_INT (PNX833X_PIC_IRQ_BASE + 39)
#define PNX8335_PIC_DISP_HD_INT (PNX833X_PIC_IRQ_BASE + 40)
#define PNX8335_PIC_DISP_SCALER_INT (PNX833X_PIC_IRQ_BASE + 41)
#define PNX8335_PIC_OSD_HD1_INT (PNX833X_PIC_IRQ_BASE + 42)
#define PNX8335_PIC_DTL_WRITER_Y_INT (PNX833X_PIC_IRQ_BASE + 43)
#define PNX8335_PIC_DTL_WRITER_C_INT (PNX833X_PIC_IRQ_BASE + 44)
#define PNX8335_PIC_DTL_EMULATOR_Y_IR_INT (PNX833X_PIC_IRQ_BASE + 45)
#define PNX8335_PIC_DTL_EMULATOR_C_IR_INT (PNX833X_PIC_IRQ_BASE + 46)
#define PNX8335_PIC_DENC_TTX_INT (PNX833X_PIC_IRQ_BASE + 47)
#define PNX8335_PIC_MMI_SIF0_INT (PNX833X_PIC_IRQ_BASE + 48)
#define PNX8335_PIC_MMI_SIF1_INT (PNX833X_PIC_IRQ_BASE + 49)
#define PNX8335_PIC_MMI_CDMMU_INT (PNX833X_PIC_IRQ_BASE + 50)
#define PNX8335_PIC_PIBCS_INT (PNX833X_PIC_IRQ_BASE + 51)
#define PNX8335_PIC_ETHERNET_INT (PNX833X_PIC_IRQ_BASE + 52)
#define PNX8335_PIC_VMSP1_0_INT (PNX833X_PIC_IRQ_BASE + 53)
#define PNX8335_PIC_VMSP1_1_INT (PNX833X_PIC_IRQ_BASE + 54)
#define PNX8335_PIC_VMSP1_DMA_INT (PNX833X_PIC_IRQ_BASE + 55)
#define PNX8335_PIC_TDGR_DE_INT (PNX833X_PIC_IRQ_BASE + 56)
#define PNX8335_PIC_IR1_IRQ_INT (PNX833X_PIC_IRQ_BASE + 57)
#endif
/* GPIO interrupts */
#define PNX833X_GPIO_0_INT (PNX833X_GPIO_IRQ_BASE + 0)
#define PNX833X_GPIO_1_INT (PNX833X_GPIO_IRQ_BASE + 1)
#define PNX833X_GPIO_2_INT (PNX833X_GPIO_IRQ_BASE + 2)
#define PNX833X_GPIO_3_INT (PNX833X_GPIO_IRQ_BASE + 3)
#define PNX833X_GPIO_4_INT (PNX833X_GPIO_IRQ_BASE + 4)
#define PNX833X_GPIO_5_INT (PNX833X_GPIO_IRQ_BASE + 5)
#define PNX833X_GPIO_6_INT (PNX833X_GPIO_IRQ_BASE + 6)
#define PNX833X_GPIO_7_INT (PNX833X_GPIO_IRQ_BASE + 7)
#define PNX833X_GPIO_8_INT (PNX833X_GPIO_IRQ_BASE + 8)
#define PNX833X_GPIO_9_INT (PNX833X_GPIO_IRQ_BASE + 9)
#define PNX833X_GPIO_10_INT (PNX833X_GPIO_IRQ_BASE + 10)
#define PNX833X_GPIO_11_INT (PNX833X_GPIO_IRQ_BASE + 11)
#define PNX833X_GPIO_12_INT (PNX833X_GPIO_IRQ_BASE + 12)
#define PNX833X_GPIO_13_INT (PNX833X_GPIO_IRQ_BASE + 13)
#define PNX833X_GPIO_14_INT (PNX833X_GPIO_IRQ_BASE + 14)
#define PNX833X_GPIO_15_INT (PNX833X_GPIO_IRQ_BASE + 15)
#endif
/*
* irq.h: IRQ mappings for PNX833X.
*
* Copyright 2008 NXP Semiconductors
* Chris Steel <chris.steel@nxp.com>
* Daniel Laird <daniel.j.laird@nxp.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_H
#define __ASM_MIPS_MACH_PNX833X_IRQ_H
/*
* The "IRQ numbers" are completely virtual.
*
* In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48.
* Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt,
* numbers 49..64 for (virtual) GPIO interrupts.
*
* In PNX8335, we have 57 interrupt lines, numbered from 1 to 57,
* connected to PIC, which uses core hardware interrupt 2, and also
* a timer interrupt through hardware interrupt 5.
* Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt,
* numbers 65..80 for (virtual) GPIO interrupts.
*
*/
#if defined(CONFIG_SOC_PNX8335)
#define PNX833X_PIC_NUM_IRQ 58
#else
#define PNX833X_PIC_NUM_IRQ 37
#endif
#define MIPS_CPU_NUM_IRQ 8
#define PNX833X_GPIO_NUM_IRQ 16
#define MIPS_CPU_IRQ_BASE 0
#define PNX833X_PIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_NUM_IRQ)
#define PNX833X_GPIO_IRQ_BASE (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ)
#define NR_IRQS (MIPS_CPU_NUM_IRQ + PNX833X_PIC_NUM_IRQ + PNX833X_GPIO_NUM_IRQ)
#endif
/*
* pnx833x.h: Register mappings for PNX833X.
*
* Copyright 2008 NXP Semiconductors
* Chris Steel <chris.steel@nxp.com>
* Daniel Laird <daniel.j.laird@nxp.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_MIPS_MACH_PNX833X_PNX833X_H
#define __ASM_MIPS_MACH_PNX833X_PNX833X_H
/* All regs are accessed in KSEG1 */
#define PNX833X_BASE (0xa0000000ul + 0x17E00000ul)
#define PNX833X_REG(offs) (*((volatile unsigned long *)(PNX833X_BASE + offs)))
/* Registers are named exactly as in PNX833X docs, just with PNX833X_ prefix */
/* Read access to multibit fields */
#define PNX833X_BIT(val, reg, field) ((val) & PNX833X_##reg##_##field)
#define PNX833X_REGBIT(reg, field) PNX833X_BIT(PNX833X_##reg, reg, field)
/* Use PNX833X_FIELD to extract a field from val */
#define PNX_FIELD(cpu, val, reg, field) \
(((val) & PNX##cpu##_##reg##_##field##_MASK) >> \
PNX##cpu##_##reg##_##field##_SHIFT)
#define PNX833X_FIELD(val, reg, field) PNX_FIELD(833X, val, reg, field)
#define PNX8330_FIELD(val, reg, field) PNX_FIELD(8330, val, reg, field)
#define PNX8335_FIELD(val, reg, field) PNX_FIELD(8335, val, reg, field)
/* Use PNX833X_REGFIELD to extract a field from a register */
#define PNX833X_REGFIELD(reg, field) PNX833X_FIELD(PNX833X_##reg, reg, field)
#define PNX8330_REGFIELD(reg, field) PNX8330_FIELD(PNX8330_##reg, reg, field)
#define PNX8335_REGFIELD(reg, field) PNX8335_FIELD(PNX8335_##reg, reg, field)
#define PNX_WRITEFIELD(cpu, val, reg, field) \
(PNX##cpu##_##reg = (PNX##cpu##_##reg & ~(PNX##cpu##_##reg##_##field##_MASK)) | \
((val) << PNX##cpu##_##reg##_##field##_SHIFT))
#define PNX833X_WRITEFIELD(val, reg, field) \
PNX_WRITEFIELD(833X, val, reg, field)
#define PNX8330_WRITEFIELD(val, reg, field) \
PNX_WRITEFIELD(8330, val, reg, field)
#define PNX8335_WRITEFIELD(val, reg, field) \
PNX_WRITEFIELD(8335, val, reg, field)
/* Macros to detect CPU type */
#define PNX833X_CONFIG_MODULE_ID PNX833X_REG(0x7FFC)
#define PNX833X_CONFIG_MODULE_ID_MAJREV_MASK 0x0000f000
#define PNX833X_CONFIG_MODULE_ID_MAJREV_SHIFT 12
#define PNX8330_CONFIG_MODULE_MAJREV 4
#define PNX8335_CONFIG_MODULE_MAJREV 5
#define CPU_IS_PNX8330 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \
PNX8330_CONFIG_MODULE_MAJREV)
#define CPU_IS_PNX8335 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \
PNX8335_CONFIG_MODULE_MAJREV)
#define PNX833X_RESET_CONTROL PNX833X_REG(0x8004)
#define PNX833X_RESET_CONTROL_2 PNX833X_REG(0x8014)
#define PNX833X_PIC_REG(offs) PNX833X_REG(0x01000 + (offs))
#define PNX833X_PIC_INT_PRIORITY PNX833X_PIC_REG(0x0)
#define PNX833X_PIC_INT_SRC PNX833X_PIC_REG(0x4)
#define PNX833X_PIC_INT_SRC_INT_SRC_MASK 0x00000FF8ul /* bits 11:3 */
#define PNX833X_PIC_INT_SRC_INT_SRC_SHIFT 3
#define PNX833X_PIC_INT_REG(irq) PNX833X_PIC_REG(0x10 + 4*(irq))
#define PNX833X_CLOCK_CPUCP_CTL PNX833X_REG(0x9228)
#define PNX833X_CLOCK_CPUCP_CTL_EXIT_RESET 0x00000002ul /* bit 1 */
#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_MASK 0x00000018ul /* bits 4:3 */
#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_SHIFT 3
#define PNX8335_CLOCK_PLL_CPU_CTL PNX833X_REG(0x9020)
#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_MASK 0x1f
#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_SHIFT 0
#define PNX833X_CONFIG_MUX PNX833X_REG(0x7004)
#define PNX833X_CONFIG_MUX_IDE_MUX 0x00000080 /* bit 7 */
#define PNX8330_CONFIG_POLYFUSE_7 PNX833X_REG(0x7040)
#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_MASK 0x00180000
#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_SHIFT 19
#define PNX833X_PIO_IN PNX833X_REG(0xF000)
#define PNX833X_PIO_OUT PNX833X_REG(0xF004)
#define PNX833X_PIO_DIR PNX833X_REG(0xF008)
#define PNX833X_PIO_SEL PNX833X_REG(0xF014)
#define PNX833X_PIO_INT_EDGE PNX833X_REG(0xF020)
#define PNX833X_PIO_INT_HI PNX833X_REG(0xF024)
#define PNX833X_PIO_INT_LO PNX833X_REG(0xF028)
#define PNX833X_PIO_INT_STATUS PNX833X_REG(0xFFE0)
#define PNX833X_PIO_INT_ENABLE PNX833X_REG(0xFFE4)
#define PNX833X_PIO_INT_CLEAR PNX833X_REG(0xFFE8)
#define PNX833X_PIO_IN2 PNX833X_REG(0xF05C)
#define PNX833X_PIO_OUT2 PNX833X_REG(0xF060)
#define PNX833X_PIO_DIR2 PNX833X_REG(0xF064)
#define PNX833X_PIO_SEL2 PNX833X_REG(0xF068)
#define PNX833X_UART0_PORTS_START (PNX833X_BASE + 0xB000)
#define PNX833X_UART0_PORTS_END (PNX833X_BASE + 0xBFFF)
#define PNX833X_UART1_PORTS_START (PNX833X_BASE + 0xC000)
#define PNX833X_UART1_PORTS_END (PNX833X_BASE + 0xCFFF)
#define PNX833X_USB_PORTS_START (PNX833X_BASE + 0x19000)
#define PNX833X_USB_PORTS_END (PNX833X_BASE + 0x19FFF)
#define PNX833X_CONFIG_USB PNX833X_REG(0x7008)
#define PNX833X_I2C0_PORTS_START (PNX833X_BASE + 0xD000)
#define PNX833X_I2C0_PORTS_END (PNX833X_BASE + 0xDFFF)
#define PNX833X_I2C1_PORTS_START (PNX833X_BASE + 0xE000)
#define PNX833X_I2C1_PORTS_END (PNX833X_BASE + 0xEFFF)
#define PNX833X_IDE_PORTS_START (PNX833X_BASE + 0x1A000)
#define PNX833X_IDE_PORTS_END (PNX833X_BASE + 0x1AFFF)
#define PNX833X_IDE_MODULE_ID PNX833X_REG(0x1AFFC)
#define PNX833X_IDE_MODULE_ID_MODULE_ID_MASK 0xFFFF0000
#define PNX833X_IDE_MODULE_ID_MODULE_ID_SHIFT 16
#define PNX833X_IDE_MODULE_ID_VALUE 0xA009
#define PNX833X_MIU_SEL0 PNX833X_REG(0x2004)
#define PNX833X_MIU_SEL0_TIMING PNX833X_REG(0x2008)
#define PNX833X_MIU_SEL1 PNX833X_REG(0x200C)
#define PNX833X_MIU_SEL1_TIMING PNX833X_REG(0x2010)
#define PNX833X_MIU_SEL2 PNX833X_REG(0x2014)
#define PNX833X_MIU_SEL2_TIMING PNX833X_REG(0x2018)
#define PNX833X_MIU_SEL3 PNX833X_REG(0x201C)
#define PNX833X_MIU_SEL3_TIMING PNX833X_REG(0x2020)
#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_MASK (1 << 14)
#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_SHIFT 14
#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_MASK (1 << 7)
#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_SHIFT 7
#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_MASK (0xF << 9)
#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_SHIFT 9
#define PNX833X_MIU_CONFIG_SPI PNX833X_REG(0x2000)
#define PNX833X_MIU_CONFIG_SPI_OPCODE_MASK (0xFF << 3)
#define PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT 3
#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_MASK (1 << 2)
#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT 2
#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_MASK (1 << 1)
#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT 1
#define PNX833X_MIU_CONFIG_SPI_SYNC_MASK (1 << 0)
#define PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT 0
#define PNX833X_WRITE_CONFIG_SPI(opcode, data_enable, addr_enable, sync) \
(PNX833X_MIU_CONFIG_SPI = \
((opcode) << PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT) | \
((data_enable) << PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT) | \
((addr_enable) << PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT) | \
((sync) << PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT))
#define PNX8335_IP3902_PORTS_START (PNX833X_BASE + 0x2F000)
#define PNX8335_IP3902_PORTS_END (PNX833X_BASE + 0x2FFFF)
#define PNX8335_IP3902_MODULE_ID PNX833X_REG(0x2FFFC)
#define PNX8335_IP3902_MODULE_ID_MODULE_ID_MASK 0xFFFF0000
#define PNX8335_IP3902_MODULE_ID_MODULE_ID_SHIFT 16
#define PNX8335_IP3902_MODULE_ID_VALUE 0x3902
/* I/O location(gets remapped)*/
#define PNX8335_NAND_BASE 0x18000000
/* I/O location with CLE high */
#define PNX8335_NAND_CLE_MASK 0x00100000
/* I/O location with ALE high */
#define PNX8335_NAND_ALE_MASK 0x00010000
#define PNX8335_SATA_PORTS_START (PNX833X_BASE + 0x2E000)
#define PNX8335_SATA_PORTS_END (PNX833X_BASE + 0x2EFFF)
#define PNX8335_SATA_MODULE_ID PNX833X_REG(0x2EFFC)
#define PNX8335_SATA_MODULE_ID_MODULE_ID_MASK 0xFFFF0000
#define PNX8335_SATA_MODULE_ID_MODULE_ID_SHIFT 16
#define PNX8335_SATA_MODULE_ID_VALUE 0xA099
#endif
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
*/
#ifndef __ASM_MIPS_MACH_PNX833X_WAR_H
#define __ASM_MIPS_MACH_PNX833X_WAR_H
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#define R4600_V1_HIT_CACHEOP_WAR 0
#define R4600_V2_HIT_CACHEOP_WAR 0
#define R5432_CP0_INTERRUPT_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
#define MIPS_CACHE_SYNC_WAR 0
#define TX49XX_ICACHE_INDEX_INV_WAR 0
#define RM9000_CDEX_SMP_WAR 0
#define ICACHE_REFILLS_WORKAROUND_WAR 0
#define R10000_LLSC_WAR 0
#define MIPS34K_MISSED_ITLB_WAR 0
#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */
#ifndef __ASM_MACH_TX49XX_MANGLE_PORT_H
#define __ASM_MACH_TX49XX_MANGLE_PORT_H
#define __swizzle_addr_b(port) (port)
#define __swizzle_addr_w(port) (port)
#define __swizzle_addr_l(port) (port)
#define __swizzle_addr_q(port) (port)
#define ioswabb(a, x) (x)
#define __mem_ioswabb(a, x) (x)
#if defined(CONFIG_TOSHIBA_RBTX4939) && \
(defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)) && \
defined(__BIG_ENDIAN)
#define NEEDS_TXX9_IOSWABW
extern u16 (*ioswabw)(volatile u16 *a, u16 x);
extern u16 (*__mem_ioswabw)(volatile u16 *a, u16 x);
#else
#define ioswabw(a, x) le16_to_cpu(x)
#define __mem_ioswabw(a, x) (x)
#endif
#define ioswabl(a, x) le32_to_cpu(x)
#define __mem_ioswabl(a, x) (x)
#define ioswabq(a, x) le64_to_cpu(x)
#define __mem_ioswabq(a, x) (x)
#endif /* __ASM_MACH_TX49XX_MANGLE_PORT_H */
......@@ -192,6 +192,7 @@
#define PM_16M 0x01ffe000
#define PM_64M 0x07ffe000
#define PM_256M 0x1fffe000
#define PM_1G 0x7fffe000
#endif
......
......@@ -98,6 +98,8 @@ search_module_dbetables(unsigned long addr)
#define MODULE_PROC_FAMILY "R5000 "
#elif defined CONFIG_CPU_R5432
#define MODULE_PROC_FAMILY "R5432 "
#elif defined CONFIG_CPU_R5500
#define MODULE_PROC_FAMILY "R5500 "
#elif defined CONFIG_CPU_R6000
#define MODULE_PROC_FAMILY "R6000 "
#elif defined CONFIG_CPU_NEVADA
......
......@@ -80,25 +80,25 @@ enum pt_watch_style {
pt_watch_style_mips64
};
struct mips32_watch_regs {
uint32_t watchlo[8];
unsigned int watchlo[8];
/* Lower 16 bits of watchhi. */
uint16_t watchhi[8];
unsigned short watchhi[8];
/* Valid mask and I R W bits.
* bit 0 -- 1 if W bit is usable.
* bit 1 -- 1 if R bit is usable.
* bit 2 -- 1 if I bit is usable.
* bits 3 - 11 -- Valid watchhi mask bits.
*/
uint16_t watch_masks[8];
unsigned short watch_masks[8];
/* The number of valid watch register pairs. */
uint32_t num_valid;
unsigned int num_valid;
} __attribute__((aligned(8)));
struct mips64_watch_regs {
uint64_t watchlo[8];
uint16_t watchhi[8];
uint16_t watch_masks[8];
uint32_t num_valid;
unsigned long long watchlo[8];
unsigned short watchhi[8];
unsigned short watch_masks[8];
unsigned int num_valid;
} __attribute__((aligned(8)));
struct pt_watch_regs {
......@@ -116,6 +116,7 @@ struct pt_watch_regs {
#include <linux/compiler.h>
#include <linux/linkage.h>
#include <linux/types.h>
#include <asm/isadep.h>
struct task_struct;
......
......@@ -86,4 +86,9 @@ void txx9_iocled_init(unsigned long baseaddr,
int basenum, unsigned int num, int lowactive,
const char *color, char **deftriggers);
/* 7SEG LED */
void txx9_7segled_init(unsigned int num,
void (*putc)(unsigned int pos, unsigned char val));
int txx9_7segled_putc(unsigned int pos, char c);
#endif /* __ASM_TXX9_GENERIC_H */
......@@ -33,6 +33,7 @@ obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5432) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5500) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R8000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_RM7000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_RM9000) += r4k_fpu.o r4k_switch.o
......
......@@ -180,7 +180,7 @@ bad_stack:
* The system call does not exist in this kernel
*/
illegal_syscall:
li v0, -ENOSYS # error
li v0, ENOSYS # error
sw v0, PT_R2(sp)
li t0, 1 # set error flag
sw t0, PT_R7(sp)
......@@ -293,7 +293,7 @@ bad_alignment:
jr t2
/* Unreached */
einval: li v0, -EINVAL
einval: li v0, -ENOSYS
jr ra
END(sys_syscall)
......
......@@ -117,7 +117,7 @@ syscall_trace_entry:
illegal_syscall:
/* This also isn't a 64-bit syscall, throw an error. */
li v0, -ENOSYS # error
li v0, ENOSYS # error
sd v0, PT_R2(sp)
li t0, 1 # set error flag
sd t0, PT_R7(sp)
......
......@@ -601,8 +601,8 @@ static int __init debugfs_mips(void)
struct dentry *d;
d = debugfs_create_dir("mips", NULL);
if (IS_ERR(d))
return PTR_ERR(d);
if (!d)
return -ENOMEM;
mips_debugfs_dir = d;
return 0;
}
......
......@@ -163,8 +163,10 @@ static void stop_this_cpu(void *dummy)
* Remove this CPU:
*/
cpu_clear(smp_processor_id(), cpu_online_map);
local_irq_enable(); /* May need to service _machine_restart IPI */
for (;;); /* Wait if available. */
for (;;) {
if (cpu_wait)
(*cpu_wait)(); /* Wait if available. */
}
}
void smp_send_stop(void)
......
......@@ -560,12 +560,12 @@ static int __init debugfs_unaligned(void)
return -ENODEV;
d = debugfs_create_u32("unaligned_instructions", S_IRUGO,
mips_debugfs_dir, &unaligned_instructions);
if (IS_ERR(d))
return PTR_ERR(d);
if (!d)
return -ENOMEM;
d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR,
mips_debugfs_dir, &unaligned_action);
if (IS_ERR(d))
return PTR_ERR(d);
if (!d)
return -ENOMEM;
return 0;
}
__initcall(debugfs_unaligned);
......
......@@ -30,19 +30,20 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/mips-boards/bonito64.h>
#include <asm/mach-lemote/pci.h>
extern struct pci_ops bonito64_pci_ops;
static struct resource loongson2e_pci_mem_resource = {
.name = "LOONGSON2E PCI MEM",
.start = 0x14000000UL,
.end = 0x1fffffffUL,
.start = LOONGSON2E_PCI_MEM_START,
.end = LOONGSON2E_PCI_MEM_END,
.flags = IORESOURCE_MEM,
};
static struct resource loongson2e_pci_io_resource = {
.name = "LOONGSON2E PCI IO MEM",
.start = 0x00004000UL,
.start = LOONGSON2E_PCI_IO_START,
.end = IO_SPACE_LIMIT,
.flags = IORESOURCE_IO,
};
......@@ -82,6 +83,12 @@ static void __init ict_pcimap(void)
static int __init pcibios_init(void)
{
ict_pcimap();
loongson2e_pci_controller.io_map_base =
(unsigned long) ioremap(LOONGSON2E_IO_PORT_BASE,
loongson2e_pci_io_resource.end -
loongson2e_pci_io_resource.start + 1);
register_pci_controller(&loongson2e_pci_controller);
return 0;
......
......@@ -34,6 +34,7 @@
#include <asm/mc146818-time.h>
#include <asm/time.h>
#include <asm/wbflush.h>
#include <asm/mach-lemote/pci.h>
#ifdef CONFIG_VT
#include <linux/console.h>
......@@ -42,12 +43,6 @@
extern void mips_reboot_setup(void);
#ifdef CONFIG_64BIT
#define PTR_PAD(p) ((0xffffffff00000000)|((unsigned long long)(p)))
#else
#define PTR_PAD(p) (p)
#endif
unsigned long cpu_clock_freq;
unsigned long bus_clock;
unsigned int memsize;
......@@ -80,8 +75,8 @@ static void wbflush_loongson2e(void)
void __init plat_mem_setup(void)
{
set_io_port_base(PTR_PAD(0xbfd00000));
set_io_port_base((unsigned long)ioremap(LOONGSON2E_IO_PORT_BASE,
IO_SPACE_LIMIT - LOONGSON2E_PCI_IO_START + 1));
mips_reboot_setup();
__wbflush = wbflush_loongson2e;
......
......@@ -18,6 +18,7 @@ obj-$(CONFIG_CPU_R4300) += dump_tlb.o
obj-$(CONFIG_CPU_R4X00) += dump_tlb.o
obj-$(CONFIG_CPU_R5000) += dump_tlb.o
obj-$(CONFIG_CPU_R5432) += dump_tlb.o
obj-$(CONFIG_CPU_R5500) += dump_tlb.o
obj-$(CONFIG_CPU_R6000) +=
obj-$(CONFIG_CPU_R8000) +=
obj-$(CONFIG_CPU_RM7000) += dump_tlb.o
......
......@@ -25,6 +25,7 @@ static inline const char *msk2str(unsigned int mask)
case PM_16M: return "16Mb";
case PM_64M: return "64Mb";
case PM_256M: return "256Mb";
case PM_1G: return "1Gb";
#endif
}
return "";
......
......@@ -1299,12 +1299,12 @@ static int __init debugfs_fpuemu(void)
if (!mips_debugfs_dir)
return -ENODEV;
dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir);
if (IS_ERR(dir))
return PTR_ERR(dir);
if (!dir)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(vars); i++) {
d = debugfs_create_u32(vars[i].name, S_IRUGO, dir, vars[i].v);
if (IS_ERR(d))
return PTR_ERR(d);
if (!d)
return -ENOMEM;
}
return 0;
}
......
......@@ -19,6 +19,7 @@ obj-$(CONFIG_CPU_R4300) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R4X00) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R5000) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R5432) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R5500) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_R8000) += c-r4k.o cex-gen.o tlb-r8k.o
obj-$(CONFIG_CPU_RM7000) += c-r4k.o cex-gen.o tlb-r4k.o
obj-$(CONFIG_CPU_RM9000) += c-r4k.o cex-gen.o tlb-r4k.o
......
......@@ -324,7 +324,6 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
if (cpu_is_noncoherent_r10000(dev))
__dma_sync((unsigned long)page_address(sg_page(sg)),
sg->length, direction);
plat_unmap_dma_mem(sg->dma_address);
}
}
......@@ -342,7 +341,6 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele
if (!plat_device_is_coherent(dev))
__dma_sync((unsigned long)page_address(sg_page(sg)),
sg->length, direction);
plat_unmap_dma_mem(sg->dma_address);
}
}
......
obj-y := interrupts.o platform.o prom.o setup.o reset.o
EXTRA_CFLAGS += -Werror
This diff is collapsed.
/*
* platform.c: platform support for PNX833X.
*
* Copyright 2008 NXP Semiconductors
* Chris Steel <chris.steel@nxp.com>
* Daniel Laird <daniel.j.laird@nxp.com>
*
* Based on software written by:
* Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/resource.h>
#include <linux/serial.h>
#include <linux/serial_pnx8xxx.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#ifdef CONFIG_I2C_PNX0105
/* Until i2c driver available in kernel.*/
#include <linux/i2c-pnx0105.h>
#endif
#include <irq.h>
#include <irq-mapping.h>
#include <pnx833x.h>
static u64 uart_dmamask = DMA_32BIT_MASK;
static struct resource pnx833x_uart_resources[] = {
[0] = {
.start = PNX833X_UART0_PORTS_START,
.end = PNX833X_UART0_PORTS_END,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PNX833X_PIC_UART0_INT,
.end = PNX833X_PIC_UART0_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = PNX833X_UART1_PORTS_START,
.end = PNX833X_UART1_PORTS_END,
.flags = IORESOURCE_MEM,
},
[3] = {
.start = PNX833X_PIC_UART1_INT,
.end = PNX833X_PIC_UART1_INT,
.flags = IORESOURCE_IRQ,
},
};
struct pnx8xxx_port pnx8xxx_ports[] = {
[0] = {
.port = {
.type = PORT_PNX8XXX,
.iotype = UPIO_MEM,
.membase = (void __iomem *)PNX833X_UART0_PORTS_START,
.mapbase = PNX833X_UART0_PORTS_START,
.irq = PNX833X_PIC_UART0_INT,
.uartclk = 3692300,
.fifosize = 16,
.flags = UPF_BOOT_AUTOCONF,
.line = 0,
},
},
[1] = {
.port = {
.type = PORT_PNX8XXX,
.iotype = UPIO_MEM,
.membase = (void __iomem *)PNX833X_UART1_PORTS_START,
.mapbase = PNX833X_UART1_PORTS_START,
.irq = PNX833X_PIC_UART1_INT,
.uartclk = 3692300,
.fifosize = 16,
.flags = UPF_BOOT_AUTOCONF,
.line = 1,
},
},
};
static struct platform_device pnx833x_uart_device = {
.name = "pnx8xxx-uart",
.id = -1,
.dev = {
.dma_mask = &uart_dmamask,
.coherent_dma_mask = DMA_32BIT_MASK,
.platform_data = pnx8xxx_ports,
},
.num_resources = ARRAY_SIZE(pnx833x_uart_resources),
.resource = pnx833x_uart_resources,
};
static u64 ehci_dmamask = DMA_32BIT_MASK;
static struct resource pnx833x_usb_ehci_resources[] = {
[0] = {
.start = PNX833X_USB_PORTS_START,
.end = PNX833X_USB_PORTS_END,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PNX833X_PIC_USB_INT,
.end = PNX833X_PIC_USB_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device pnx833x_usb_ehci_device = {
.name = "pnx833x-ehci",
.id = -1,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = DMA_32BIT_MASK,
},
.num_resources = ARRAY_SIZE(pnx833x_usb_ehci_resources),
.resource = pnx833x_usb_ehci_resources,
};
#ifdef CONFIG_I2C_PNX0105
static struct resource pnx833x_i2c0_resources[] = {
{
.start = PNX833X_I2C0_PORTS_START,
.end = PNX833X_I2C0_PORTS_END,
.flags = IORESOURCE_MEM,
},
{
.start = PNX833X_PIC_I2C0_INT,
.end = PNX833X_PIC_I2C0_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct resource pnx833x_i2c1_resources[] = {
{
.start = PNX833X_I2C1_PORTS_START,
.end = PNX833X_I2C1_PORTS_END,
.flags = IORESOURCE_MEM,
},
{
.start = PNX833X_PIC_I2C1_INT,
.end = PNX833X_PIC_I2C1_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = {
{
.base = PNX833X_I2C0_PORTS_START,
.irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */
.clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */
.bus_addr = 0, /* no slave support */
},
{
.base = PNX833X_I2C1_PORTS_START,
.irq = -1, /* on high freq, polling is faster */
/*.irq = PNX833X_PIC_I2C1_INT,*/
.clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */
.bus_addr = 0, /* no slave support */
},
};
static struct platform_device pnx833x_i2c0_device = {
.name = "i2c-pnx0105",
.id = 0,
.dev = {
.platform_data = &pnx833x_i2c_dev[0],
},
.num_resources = ARRAY_SIZE(pnx833x_i2c0_resources),
.resource = pnx833x_i2c0_resources,
};
static struct platform_device pnx833x_i2c1_device = {
.name = "i2c-pnx0105",
.id = 1,
.dev = {
.platform_data = &pnx833x_i2c_dev[1],
},
.num_resources = ARRAY_SIZE(pnx833x_i2c1_resources),
.resource = pnx833x_i2c1_resources,
};
#endif
static u64 ethernet_dmamask = DMA_32BIT_MASK;
static struct resource pnx833x_ethernet_resources[] = {
[0] = {
.start = PNX8335_IP3902_PORTS_START,
.end = PNX8335_IP3902_PORTS_END,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PNX8335_PIC_ETHERNET_INT,
.end = PNX8335_PIC_ETHERNET_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device pnx833x_ethernet_device = {
.name = "ip3902-eth",
.id = -1,
.dev = {
.dma_mask = &ethernet_dmamask,
.coherent_dma_mask = DMA_32BIT_MASK,
},
.num_resources = ARRAY_SIZE(pnx833x_ethernet_resources),
.resource = pnx833x_ethernet_resources,
};
static struct resource pnx833x_sata_resources[] = {
[0] = {
.start = PNX8335_SATA_PORTS_START,
.end = PNX8335_SATA_PORTS_END,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PNX8335_PIC_SATA_INT,
.end = PNX8335_PIC_SATA_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device pnx833x_sata_device = {
.name = "pnx833x-sata",
.id = -1,
.num_resources = ARRAY_SIZE(pnx833x_sata_resources),
.resource = pnx833x_sata_resources,
};
static const char *part_probes[] = {
"cmdlinepart",
NULL
};
static void
pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_CLE)
writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK));
else
writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK));
}
static struct platform_nand_data pnx833x_flash_nand_data = {
.chip = {
.chip_delay = 25,
.part_probe_types = part_probes,
},
.ctrl = {
.cmd_ctrl = pnx833x_flash_nand_cmd_ctrl
}
};
/*
* Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!),
* 12 bytes more seems to be the standard that allows for NAND access.
*/
static struct resource pnx833x_flash_nand_resource = {
.start = PNX8335_NAND_BASE,
.end = PNX8335_NAND_BASE + 12,
.flags = IORESOURCE_MEM,
};
static struct platform_device pnx833x_flash_nand = {
.name = "gen_nand",
.id = -1,
.num_resources = 1,
.resource = &pnx833x_flash_nand_resource,
.dev = {
.platform_data = &pnx833x_flash_nand_data,
},
};
static struct platform_device *pnx833x_platform_devices[] __initdata = {
&pnx833x_uart_device,
&pnx833x_usb_ehci_device,
#ifdef CONFIG_I2C_PNX0105
&pnx833x_i2c0_device,
&pnx833x_i2c1_device,
#endif
&pnx833x_ethernet_device,
&pnx833x_sata_device,
&pnx833x_flash_nand,
};
static int __init pnx833x_platform_init(void)
{
int res;
res = platform_add_devices(pnx833x_platform_devices,
ARRAY_SIZE(pnx833x_platform_devices));
return res;
}
arch_initcall(pnx833x_platform_init);
/*
* prom.c:
*
* Copyright 2008 NXP Semiconductors
* Chris Steel <chris.steel@nxp.com>
* Daniel Laird <daniel.j.laird@nxp.com>
*
* Based on software written by:
* Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <asm/bootinfo.h>
#include <linux/string.h>
void __init prom_init_cmdline(void)
{
int argc = fw_arg0;
char **argv = (char **)fw_arg1;
char *c = &(arcs_cmdline[0]);
int i;
for (i = 1; i < argc; i++) {
strcpy(c, argv[i]);
c += strlen(argv[i]);
if (i < argc-1)
*c++ = ' ';
}
*c = 0;
}
char __init *prom_getenv(char *envname)
{
extern char **prom_envp;
char **env = prom_envp;
int i;
i = strlen(envname);
while (*env) {
if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=')
return *env + i + 1;
env++;
}
return 0;
}
void __init prom_free_prom_memory(void)
{
}
char * __init prom_getcmdline(void)
{
return arcs_cmdline;
}
/*
* reset.c: reset support for PNX833X.
*
* Copyright 2008 NXP Semiconductors
* Chris Steel <chris.steel@nxp.com>
* Daniel Laird <daniel.j.laird@nxp.com>
*
* Based on software written by:
* Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/slab.h>
#include <linux/reboot.h>
#include <pnx833x.h>
void pnx833x_machine_restart(char *command)
{
PNX833X_RESET_CONTROL_2 = 0;
PNX833X_RESET_CONTROL = 0;
}
void pnx833x_machine_halt(void)
{
while (1)
__asm__ __volatile__ ("wait");
}
void pnx833x_machine_power_off(void)
{
pnx833x_machine_halt();
}
/*
* setup.c: Setup PNX833X Soc.
*
* Copyright 2008 NXP Semiconductors
* Chris Steel <chris.steel@nxp.com>
* Daniel Laird <daniel.j.laird@nxp.com>
*
* Based on software written by:
* Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/pci.h>
#include <asm/reboot.h>
#include <pnx833x.h>
#include <gpio.h>
extern void pnx833x_board_setup(void);
extern void pnx833x_machine_restart(char *);
extern void pnx833x_machine_halt(void);
extern void pnx833x_machine_power_off(void);
int __init plat_mem_setup(void)
{
/* fake pci bus to avoid bounce buffers */
PCI_DMA_BUS_IS_PHYS = 1;
/* set mips clock to 320MHz */
#if defined(CONFIG_SOC_PNX8335)
PNX8335_WRITEFIELD(0x17, CLOCK_PLL_CPU_CTL, FREQ);
#endif
pnx833x_gpio_init(); /* so it will be ready in board_setup() */
pnx833x_board_setup();
_machine_restart = pnx833x_machine_restart;
_machine_halt = pnx833x_machine_halt;
pm_power_off = pnx833x_machine_power_off;
/* IO/MEM resources. */
set_io_port_base(KSEG1);
ioport_resource.start = 0;
ioport_resource.end = ~0;
iomem_resource.start = 0;
iomem_resource.end = ~0;
return 0;
}
lib-y := board.o
EXTRA_CFLAGS += -Werror
/*
* board.c: STB225 board support.
*
* Copyright 2008 NXP Semiconductors
* Chris Steel <chris.steel@nxp.com>
* Daniel Laird <daniel.j.laird@nxp.com>
*
* Based on software written by:
* Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <asm/bootinfo.h>
#include <linux/mm.h>
#include <pnx833x.h>
#include <gpio.h>
/* endianess twiddlers */
#define PNX8335_DEBUG0 0x4400
#define PNX8335_DEBUG1 0x4404
#define PNX8335_DEBUG2 0x4408
#define PNX8335_DEBUG3 0x440c
#define PNX8335_DEBUG4 0x4410
#define PNX8335_DEBUG5 0x4414
#define PNX8335_DEBUG6 0x4418
#define PNX8335_DEBUG7 0x441c
int prom_argc;
char **prom_argv = 0, **prom_envp = 0;
extern void prom_init_cmdline(void);
extern char *prom_getenv(char *envname);
const char *get_system_type(void)
{
return "NXP STB22x";
}
static inline unsigned long env_or_default(char *env, unsigned long dfl)
{
char *str = prom_getenv(env);
return str ? simple_strtol(str, 0, 0) : dfl;
}
void __init prom_init(void)
{
unsigned long memsize;
prom_argc = fw_arg0;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize = env_or_default("memsize", 0x02000000);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
void __init pnx833x_board_setup(void)
{
pnx833x_gpio_select_function_alt(4);
pnx833x_gpio_select_output(4);
pnx833x_gpio_select_function_alt(5);
pnx833x_gpio_select_input(5);
pnx833x_gpio_select_function_alt(6);
pnx833x_gpio_select_input(6);
pnx833x_gpio_select_function_alt(7);
pnx833x_gpio_select_output(7);
pnx833x_gpio_select_function_alt(25);
pnx833x_gpio_select_function_alt(26);
pnx833x_gpio_select_function_alt(27);
pnx833x_gpio_select_function_alt(28);
pnx833x_gpio_select_function_alt(29);
pnx833x_gpio_select_function_alt(30);
pnx833x_gpio_select_function_alt(31);
pnx833x_gpio_select_function_alt(32);
pnx833x_gpio_select_function_alt(33);
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
/* Setup MIU for NAND access on CS0...
*
* (it seems that we must also configure CS1 for reliable operation,
* otherwise the first read ID command will fail if it's read as 4 bytes
* but pass if it's read as 1 word.)
*/
/* Setup MIU CS0 & CS1 timing */
PNX833X_MIU_SEL0 = 0;
PNX833X_MIU_SEL1 = 0;
PNX833X_MIU_SEL0_TIMING = 0x50003081;
PNX833X_MIU_SEL1_TIMING = 0x50003081;
/* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
pnx833x_gpio_select_function_alt(0);
/* Setup GPIO 04 to input NAND read/busy signal */
pnx833x_gpio_select_function_io(4);
pnx833x_gpio_select_input(4);
/* Setup GPIO 05 to disable NAND write protect */
pnx833x_gpio_select_function_io(5);
pnx833x_gpio_select_output(5);
pnx833x_gpio_write(1, 5);
#elif defined(CONFIG_MTD_CFI) || defined(CONFIG_MTD_CFI_MODULE)
/* Set up MIU for 16-bit NOR access on CS0 and CS1... */
/* Setup MIU CS0 & CS1 timing */
PNX833X_MIU_SEL0 = 1;
PNX833X_MIU_SEL1 = 1;
PNX833X_MIU_SEL0_TIMING = 0x6A08D082;
PNX833X_MIU_SEL1_TIMING = 0x6A08D082;
/* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
pnx833x_gpio_select_function_alt(0);
#endif
}
......@@ -13,7 +13,7 @@ obj-$(CONFIG_MIPS_MSC) += ops-msc.o
obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
......
......@@ -30,7 +30,7 @@
#include <asm/bootinfo.h>
#include <asm/emma2rh/emma2rh.h>
#include <asm/emma/emma2rh.h>
#define EMMA2RH_PCI_HOST_SLOT 0x09
#define EMMA2RH_USB_SLOT 0x03
......
......@@ -30,6 +30,7 @@
#include <linux/init.h>
#include <asm/mach-rc32434/rc32434.h>
#include <asm/mach-rc32434/irq.h>
static int __devinitdata irq_map[2][12] = {
{0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1},
......
......@@ -30,7 +30,7 @@
#include <asm/addrspace.h>
#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
#include <asm/emma/emma2rh.h>
#define RTABORT (0x1<<9)
#define RMABORT (0x1<<10)
......
......@@ -30,7 +30,7 @@
#include <asm/bootinfo.h>
#include <asm/emma2rh/emma2rh.h>
#include <asm/emma/emma2rh.h>
static struct resource pci_io_resource = {
.name = "pci IO space",
......
......@@ -280,7 +280,7 @@ static int __init plat_setup_devices(void)
{
/* Look for the CF card reader */
if (!readl(IDT434_REG_BASE + DEV1MASK))
rb532_devs[1] = NULL;
rb532_devs[2] = NULL; /* disable cf_slot0 at index 2 */
else {
cf_slot0_res[0].start =
readl(IDT434_REG_BASE + DEV1BASE);
......
......@@ -310,6 +310,10 @@ int __init rb532_gpio_init(void)
return -ENXIO;
}
/* Set the interrupt status and level for the CF pin */
rb532_gpio_set_int_level(&rb532_gpio_chip->chip, CF_GPIO_NUM, 1);
rb532_gpio_set_int_status(&rb532_gpio_chip->chip, CF_GPIO_NUM, 0);
return 0;
}
arch_initcall(rb532_gpio_init);
......@@ -12,20 +12,11 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/irq_cpu.h>
#include <asm/sgi/ioc.h>
#include <asm/sgi/hpc3.h>
#include <asm/sgi/ip22.h>
#include <asm/time.h>
/* #define DEBUG_SGINT */
/* So far nothing hangs here */
#undef USE_LIO3_IRQ
......@@ -68,7 +59,7 @@ static void enable_local1_irq(unsigned int irq)
sgint->imask1 |= (1 << (irq - SGINT_LOCAL1));
}
void disable_local1_irq(unsigned int irq)
static void disable_local1_irq(unsigned int irq)
{
sgint->imask1 &= ~(1 << (irq - SGINT_LOCAL1));
}
......@@ -87,7 +78,7 @@ static void enable_local2_irq(unsigned int irq)
sgint->cmeimask0 |= (1 << (irq - SGINT_LOCAL2));
}
void disable_local2_irq(unsigned int irq)
static void disable_local2_irq(unsigned int irq)
{
sgint->cmeimask0 &= ~(1 << (irq - SGINT_LOCAL2));
if (!sgint->cmeimask0)
......@@ -108,7 +99,7 @@ static void enable_local3_irq(unsigned int irq)
sgint->cmeimask1 |= (1 << (irq - SGINT_LOCAL3));
}
void disable_local3_irq(unsigned int irq)
static void disable_local3_irq(unsigned int irq)
{
sgint->cmeimask1 &= ~(1 << (irq - SGINT_LOCAL3));
if (!sgint->cmeimask1)
......@@ -344,6 +335,6 @@ void __init arch_init_irq(void)
#ifdef CONFIG_EISA
if (ip22_is_fullhouse()) /* Only Indigo-2 has EISA stuff */
ip22_eisa_init();
ip22_eisa_init();
#endif
}
......@@ -46,9 +46,10 @@ config TOSHIBA_RBTX4938
support this machine type
config TOSHIBA_RBTX4939
bool "Toshiba RBTX4939 bobard"
bool "Toshiba RBTX4939 board"
depends on MACH_TX49XX
select SOC_TX4939
select TXX9_7SEGLED
help
This Toshiba board is based on the TX4939 processor. Say Y here to
support this machine type
......@@ -86,6 +87,9 @@ config SOC_TX4939
select HW_HAS_PCI
select PCI_TX4927
config TXX9_7SEGLED
bool
config TOSHIBA_FPCIB0
bool "FPCIB0 Backplane Support"
depends on PCI && MACH_TXX9
......
/*
* 7 Segment LED routines
* Based on RBTX49xx patch from CELF patch archive.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* (C) Copyright TOSHIBA CORPORATION 2005-2007
* All Rights Reserved.
*/
#include <linux/sysdev.h>
#include <linux/slab.h>
#include <linux/map_to_7segment.h>
#include <asm/txx9/generic.h>
static unsigned int tx_7segled_num;
static void (*tx_7segled_putc)(unsigned int pos, unsigned char val);
void __init txx9_7segled_init(unsigned int num,
void (*putc)(unsigned int pos, unsigned char val))
{
tx_7segled_num = num;
tx_7segled_putc = putc;
}
static SEG7_CONVERSION_MAP(txx9_seg7map, MAP_ASCII7SEG_ALPHANUM_LC);
int txx9_7segled_putc(unsigned int pos, char c)
{
if (pos >= tx_7segled_num)
return -EINVAL;
c = map_to_seg7(&txx9_seg7map, c);
if (c < 0)
return c;
tx_7segled_putc(pos, c);
return 0;
}
static ssize_t ascii_store(struct sys_device *dev,
struct sysdev_attribute *attr,
const char *buf, size_t size)
{
unsigned int ch = dev->id;
txx9_7segled_putc(ch, buf[0]);
return size;
}
static ssize_t raw_store(struct sys_device *dev,
struct sysdev_attribute *attr,
const char *buf, size_t size)
{
unsigned int ch = dev->id;
tx_7segled_putc(ch, buf[0]);
return size;
}
static SYSDEV_ATTR(ascii, 0200, NULL, ascii_store);
static SYSDEV_ATTR(raw, 0200, NULL, raw_store);
static ssize_t map_seg7_show(struct sysdev_class *class, char *buf)
{
memcpy(buf, &txx9_seg7map, sizeof(txx9_seg7map));
return sizeof(txx9_seg7map);
}
static ssize_t map_seg7_store(struct sysdev_class *class,
const char *buf, size_t size)
{
if (size != sizeof(txx9_seg7map))
return -EINVAL;
memcpy(&txx9_seg7map, buf, size);
return size;
}
static SYSDEV_CLASS_ATTR(map_seg7, 0600, map_seg7_show, map_seg7_store);
static struct sysdev_class tx_7segled_sysdev_class = {
.name = "7segled",
};
static int __init tx_7segled_init_sysfs(void)
{
int error, i;
if (!tx_7segled_num)
return -ENODEV;
error = sysdev_class_register(&tx_7segled_sysdev_class);
if (error)
return error;
error = sysdev_class_create_file(&tx_7segled_sysdev_class,
&attr_map_seg7);
if (error)
return error;
for (i = 0; i < tx_7segled_num; i++) {
struct sys_device *dev;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) {
error = -ENODEV;
break;
}
dev->id = i;
dev->cls = &tx_7segled_sysdev_class;
error = sysdev_register(dev);
if (!error) {
sysdev_create_file(dev, &attr_ascii);
sysdev_create_file(dev, &attr_raw);
}
}
return error;
}
device_initcall(tx_7segled_init_sysfs);
......@@ -10,5 +10,6 @@ obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o
obj-$(CONFIG_SOC_TX4939) += setup_tx4939.o irq_tx4939.o
obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o
obj-$(CONFIG_SPI) += spi_eeprom.o
obj-$(CONFIG_TXX9_7SEGLED) += 7segled.o
EXTRA_CFLAGS += -Werror
......@@ -156,11 +156,23 @@ static struct txx9_board_vec *__init find_board_byname(const char *name)
static void __init prom_init_cmdline(void)
{
int argc = (int)fw_arg0;
int *argv32 = (int *)fw_arg1;
int argc;
int *argv32;
int i; /* Always ignore the "-c" at argv[0] */
char builtin[CL_SIZE];
if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) {
/*
* argc is not a valid number, or argv32 is not a valid
* pointer
*/
argc = 0;
argv32 = NULL;
} else {
argc = (int)fw_arg0;
argv32 = (int *)fw_arg1;
}
/* ignore all built-in args if any f/w args given */
/*
* But if built-in strings was started with '+', append them
......@@ -414,10 +426,12 @@ char * __init prom_getcmdline(void)
const char *__init prom_getenv(const char *name)
{
const s32 *str = (const s32 *)fw_arg2;
const s32 *str;
if (!str)
if (fw_arg2 < CKSEG0)
return NULL;
str = (const s32 *)fw_arg2;
/* YAMON style ("name", "value" pairs) */
while (str[0] && str[1]) {
if (!strcmp((const char *)(unsigned long)str[0], name))
......@@ -622,6 +636,21 @@ unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none;
EXPORT_SYMBOL(__swizzle_addr_b);
#endif
#ifdef NEEDS_TXX9_IOSWABW
static u16 ioswabw_default(volatile u16 *a, u16 x)
{
return le16_to_cpu(x);
}
static u16 __mem_ioswabw_default(volatile u16 *a, u16 x)
{
return x;
}
u16 (*ioswabw)(volatile u16 *a, u16 x) = ioswabw_default;
EXPORT_SYMBOL(ioswabw);
u16 (*__mem_ioswabw)(volatile u16 *a, u16 x) = __mem_ioswabw_default;
EXPORT_SYMBOL(__mem_ioswabw);
#endif
void __init txx9_physmap_flash_init(int no, unsigned long addr,
unsigned long size,
const struct physmap_flash_data *pdata)
......
......@@ -14,6 +14,8 @@
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/interrupt.h>
#include <linux/smc91x.h>
#include <asm/reboot.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
......@@ -33,6 +35,21 @@ static void __init rbtx4939_time_init(void)
tx4939_time_init(0);
}
#if defined(__BIG_ENDIAN) && \
(defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE))
#define HAVE_RBTX4939_IOSWAB
#define IS_CE1_ADDR(addr) \
((((unsigned long)(addr) - IO_BASE) & 0xfff00000) == TXX9_CE(1))
static u16 rbtx4939_ioswabw(volatile u16 *a, u16 x)
{
return IS_CE1_ADDR(a) ? x : le16_to_cpu(x);
}
static u16 rbtx4939_mem_ioswabw(volatile u16 *a, u16 x)
{
return !IS_CE1_ADDR(a) ? x : le16_to_cpu(x);
}
#endif /* __BIG_ENDIAN && CONFIG_SMC91X */
static void __init rbtx4939_pci_setup(void)
{
#ifdef CONFIG_PCI
......@@ -239,6 +256,32 @@ static inline void rbtx4939_led_setup(void)
}
#endif
static void __rbtx4939_7segled_putc(unsigned int pos, unsigned char val)
{
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
unsigned long flags;
local_irq_save(flags);
/* bit7: reserved for LED class */
led_val[pos] = (led_val[pos] & 0x80) | (val & 0x7f);
val = led_val[pos];
local_irq_restore(flags);
#endif
writeb(val, rbtx4939_7seg_addr(pos / 4, pos % 4));
}
static void rbtx4939_7segled_putc(unsigned int pos, unsigned char val)
{
/* convert from map_to_seg7() notation */
val = (val & 0x88) |
((val & 0x40) >> 6) |
((val & 0x20) >> 4) |
((val & 0x10) >> 2) |
((val & 0x04) << 2) |
((val & 0x02) << 4) |
((val & 0x01) << 6);
__rbtx4939_7segled_putc(pos, val);
}
static void __init rbtx4939_arch_init(void)
{
rbtx4939_pci_setup();
......@@ -246,6 +289,22 @@ static void __init rbtx4939_arch_init(void)
static void __init rbtx4939_device_init(void)
{
unsigned long smc_addr = RBTX4939_ETHER_ADDR - IO_BASE;
struct resource smc_res[] = {
{
.start = smc_addr,
.end = smc_addr + 0x10 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = RBTX4939_IRQ_ETHER,
/* override default irq flag defined in smc91x.h */
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
struct smc91x_platdata smc_pdata = {
.flags = SMC91X_USE_16BIT,
};
struct platform_device *pdev;
#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
int i, j;
unsigned char ethaddr[2][6];
......@@ -262,6 +321,12 @@ static void __init rbtx4939_device_init(void)
}
tx4939_ethaddr_init(ethaddr[0], ethaddr[1]);
#endif
pdev = platform_device_alloc("smc91x", -1);
if (!pdev ||
platform_device_add_resources(pdev, smc_res, ARRAY_SIZE(smc_res)) ||
platform_device_add_data(pdev, &smc_pdata, sizeof(smc_pdata)) ||
platform_device_add(pdev))
platform_device_put(pdev);
rbtx4939_led_setup();
tx4939_wdt_init();
tx4939_ata_init();
......@@ -269,6 +334,8 @@ static void __init rbtx4939_device_init(void)
static void __init rbtx4939_setup(void)
{
int i;
rbtx4939_ebusc_setup();
/* always enable ATA0 */
txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE);
......@@ -276,9 +343,16 @@ static void __init rbtx4939_setup(void)
if (txx9_master_clock == 0)
txx9_master_clock = 20000000;
tx4939_setup();
#ifdef HAVE_RBTX4939_IOSWAB
ioswabw = rbtx4939_ioswabw;
__mem_ioswabw = rbtx4939_mem_ioswabw;
#endif
_machine_restart = rbtx4939_machine_restart;
txx9_7segled_init(RBTX4939_MAX_7SEGLEDS, rbtx4939_7segled_putc);
for (i = 0; i < RBTX4939_MAX_7SEGLEDS; i++)
txx9_7segled_putc(i, '-');
pr_info("RBTX4939 (Rev %02x) --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
readb(rbtx4939_board_rev_addr), readb(rbtx4939_ioc_rev_addr),
readb(rbtx4939_udipsw_addr), readb(rbtx4939_bdipsw_addr));
......
......@@ -174,5 +174,6 @@ static void __exit sgi_buttons_exit(void)
platform_driver_unregister(&sgi_buttons_driver);
}
MODULE_LICENSE("GPL");
module_init(sgi_buttons_init);
module_exit(sgi_buttons_exit);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment