Merge tag 'v4.9-rockchip-dts64-fixes1' of...

Merge tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes

Correct regulator handling on Rockchip arm64 boards to make
bind/unbind calls work correctly and remove a sdio-only
property from non-sdio mmc hosts, that accidentially was
added there.

* tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts

@@ -116,7 +116,6 @@ &emmc {
 	cap-mmc-highspeed;
 	clock-frequency = <150000000>;
 	disable-wp;
-	keep-power-in-suspend;
 	non-removable;
 	num-slots = <1>;
 	vmmc-supply = <&vcc_io>;
@@ -258,8 +257,6 @@ vcc18_lcd: LDO_REG8 {
 			};
 
 			vcc_sd: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-name = "vcc_sd";
 			};
 

arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts

@@ -152,8 +152,6 @@ vcc_sd: vcc-sd-regulator {
 		gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
 		vin-supply = <&vcc_io>;
 	};
 
@@ -201,7 +199,6 @@ &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
-	keep-power-in-suspend;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	mmc-hs200-1_2v;
 	mmc-hs200-1_8v;
@@ -350,7 +347,6 @@ &sdmmc {
 	clock-freq-min-max = <400000 50000000>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
-	keep-power-in-suspend;
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;