arm64: dts: renesas: ulcb-kf: Sort nodes

Sort nodes.

If node address is present
   * Sort by node address, grouping all nodes with the same compat string
     and sorting the group alphabetically.
Else
   * Sort alphabetically

This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
[geert: Sort i2c slave nodes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/arm64/boot/dts/renesas/ulcb-kf.dtsi

@@ -83,6 +83,56 @@ &hsusb {
 };
 
 &i2c2 {
+	i2cswitch2: i2c-switch@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+
+		/* Audio_SDA, Audio_SCL */
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			pcm3168a: audio-codec@44 {
+				#sound-dai-cells = <0>;
+				compatible = "ti,pcm3168a";
+				reg = <0x44>;
+				clocks = <&clksndsel>;
+				clock-names = "scki";
+
+				VDD1-supply	= <&snd_3p3v>;
+				VDD2-supply	= <&snd_3p3v>;
+				VCCAD1-supply	= <&snd_vcc5v>;
+				VCCAD2-supply	= <&snd_vcc5v>;
+				VCCDA1-supply	= <&snd_vcc5v>;
+				VCCDA2-supply	= <&snd_vcc5v>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					mclk-fs = <512>;
+					port@0 {
+						reg = <0>;
+						pcm3168a_endpoint_p: endpoint {
+							remote-endpoint = <&rsnd_for_pcm3168a_play>;
+							clocks = <&clksndsel>;
+						};
+					};
+					port@1 {
+						reg = <1>;
+						pcm3168a_endpoint_c: endpoint {
+							remote-endpoint = <&rsnd_for_pcm3168a_capture>;
+							clocks = <&clksndsel>;
+						};
+					};
+				};
+			};
+		};
+	};
+
 	/* U11 */
 	gpio_exp_74: gpio@74 {
 		compatible = "ti,tca9539";
@@ -100,13 +150,6 @@ audio_out_off {
 			line-name = "Audio_Out_OFF";
 		};
 
-		sd-wifi-mux {
-			gpio-hog;
-			gpios = <5 GPIO_ACTIVE_HIGH>;
-			output-low;	/* Connect WL1837 */
-			line-name = "SD WiFi mux";
-		};
-
 		hub_pwen {
 			gpio-hog;
 			gpios = <6 GPIO_ACTIVE_HIGH>;
@@ -121,6 +164,13 @@ hub_rst {
 			line-name = "HUB rst";
 		};
 
+		otg_extlpn {
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "OTG EXTLPn";
+		};
+
 		otg_offvbusn {
 			gpio-hog;
 			gpios = <8 GPIO_ACTIVE_HIGH>;
@@ -128,11 +178,11 @@ otg_offvbusn {
 			line-name = "OTG OFFVBUSn";
 		};
 
-		otg_extlpn {
+		sd-wifi-mux {
 			gpio-hog;
-			gpios = <9 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "OTG EXTLPn";
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-low;	/* Connect WL1837 */
+			line-name = "SD WiFi mux";
 		};
 
 		snd_rst {
@@ -153,59 +203,17 @@ gpio_exp_75: gpio@75 {
 		interrupt-parent = <&gpio6>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 	};
+};
 
-	i2cswitch2: i2c-switch@71 {
+&i2c4 {
+	i2cswitch4: i2c-switch@71 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x71>;
-		reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-
-		/* Audio_SDA, Audio_SCL */
-		i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			pcm3168a: audio-codec@44 {
-				#sound-dai-cells = <0>;
-				compatible = "ti,pcm3168a";
-				reg = <0x44>;
-				clocks = <&clksndsel>;
-				clock-names = "scki";
-
-				VDD1-supply	= <&snd_3p3v>;
-				VDD2-supply	= <&snd_3p3v>;
-				VCCAD1-supply	= <&snd_vcc5v>;
-				VCCAD2-supply	= <&snd_vcc5v>;
-				VCCDA1-supply	= <&snd_vcc5v>;
-				VCCDA2-supply	= <&snd_vcc5v>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					mclk-fs = <512>;
-					port@0 {
-						reg = <0>;
-						pcm3168a_endpoint_p: endpoint {
-							remote-endpoint = <&rsnd_for_pcm3168a_play>;
-							clocks = <&clksndsel>;
-						};
-					};
-					port@1 {
-						reg = <1>;
-						pcm3168a_endpoint_c: endpoint {
-							remote-endpoint = <&rsnd_for_pcm3168a_capture>;
-							clocks = <&clksndsel>;
-						};
-					};
-				};
-			};
-		};
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
 	};
-};
 
-&i2c4 {
 	gpio_exp_76: gpio@76 {
 		compatible = "ti,tca9539";
 		reg = <0x76>;
@@ -225,14 +233,6 @@ gpio_exp_77: gpio@77 {
 		interrupt-parent = <&gpio5>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 	};
-
-	i2cswitch4: i2c-switch@71 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
-	};
 };
 
 &ohci0 {
@@ -279,14 +279,50 @@ sdhi3_pins: sdhi3 {
 		power-source = <3300>;
 	};
 
+	sound_pcm_pins: sound-pcm {
+		groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
+		function = "ssi";
+	};
+
 	usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
 	};
+};
 
-	sound_pcm_pins: sound-pcm {
-		groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
-		function = "ssi";
+&rcar_sound {
+	pinctrl-0 = <&sound_pins
+		     &sound_clk_pins
+		     &sound_pcm_pins>;
+
+	ports {
+		/* rsnd_port0/1 are on salvator-common */
+		rsnd_port2: port@2 {
+			reg = <2>;
+			rsnd_for_pcm3168a_play: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_for_pcm3168a_play>;
+				frame-master = <&rsnd_for_pcm3168a_play>;
+				dai-tdm-slot-num = <8>;
+
+				playback = <&ssi3>;
+			};
+		};
+		rsnd_port3: port@3 {
+			reg = <3>;
+			rsnd_for_pcm3168a_capture: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_c>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_for_pcm3168a_capture>;
+				frame-master = <&rsnd_for_pcm3168a_capture>;
+				dai-tdm-slot-num = <6>;
+
+				capture  = <&ssi4>;
+			};
+		};
 	};
 };
 
@@ -322,17 +358,6 @@ wlcore: wlcore@2 {
 	};
 };
 
-&usb2_phy0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&xhci0 {
-	status = "okay";
-};
-
 &sound_card {
 	dais = <&rsnd_port0	/* ak4613 */
 		&rsnd_port1	/* HDMI0  */
@@ -341,42 +366,17 @@ &rsnd_port3	/* pcm3168a capture  */
 		>;
 };
 
-&rcar_sound {
-	pinctrl-0 = <&sound_pins
-		     &sound_clk_pins
-		     &sound_pcm_pins>;
-
-	ports {
-		/* rsnd_port0/1 are on salvator-common */
-		rsnd_port2: port@2 {
-			reg = <2>;
-			rsnd_for_pcm3168a_play: endpoint {
-				remote-endpoint = <&pcm3168a_endpoint_p>;
-
-				dai-format = "i2s";
-				bitclock-master = <&rsnd_for_pcm3168a_play>;
-				frame-master = <&rsnd_for_pcm3168a_play>;
-				dai-tdm-slot-num = <8>;
-
-				playback = <&ssi3>;
-			};
-		};
-		rsnd_port3: port@3 {
-			reg = <3>;
-			rsnd_for_pcm3168a_capture: endpoint {
-				remote-endpoint = <&pcm3168a_endpoint_c>;
+&ssi4 {
+	shared-pin;
+};
 
-				dai-format = "i2s";
-				bitclock-master = <&rsnd_for_pcm3168a_capture>;
-				frame-master = <&rsnd_for_pcm3168a_capture>;
-				dai-tdm-slot-num = <6>;
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
 
-				capture  = <&ssi4>;
-			};
-		};
-	};
+	status = "okay";
 };
 
-&ssi4 {
-	shared-pin;
+&xhci0 {
+	status = "okay";
 };