Merge tag 'gpio-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull gpio fixes from Linus Walleij:
 "A first round of GPIO fixes for the v3.11 series:
   - OMAP device tree boot fix
   - Handle an error condition in the MSM driver

  The OMAP patches have been around since around the merge window, but
  since they first caused more breakage I let them boil in -next for a
  while.  These should be fine now"

* tag 'gpio-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  drivers: gpio: msm: Fix the error condition for reading ngpio
  gpio/omap: fix build error when OF_GPIO is not defined.
  gpio/omap: auto request GPIO as input if used as IRQ via DT
  gpio/omap: don't create an IRQ mapping for every GPIO on DT

drivers/gpio/gpio-msm-v2.c

@@ -378,7 +378,7 @@ static int msm_gpio_probe(struct platform_device *pdev)
 	int ret, ngpio;
 	struct resource *res;
 
-	if (!of_property_read_u32(pdev->dev.of_node, "ngpio", &ngpio)) {
+	if (of_property_read_u32(pdev->dev.of_node, "ngpio", &ngpio)) {
 		dev_err(&pdev->dev, "%s: ngpio property missing\n", __func__);
 		return -EINVAL;
 	}

drivers/gpio/gpio-omap.c

@@ -1037,6 +1037,18 @@ omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
 			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
 }
 
+#if defined(CONFIG_OF_GPIO)
+static inline bool omap_gpio_chip_boot_dt(struct gpio_chip *chip)
+{
+	return chip->of_node != NULL;
+}
+#else
+static inline bool omap_gpio_chip_boot_dt(struct gpio_chip *chip)
+{
+	return false;
+}
+#endif
+
 static void omap_gpio_chip_init(struct gpio_bank *bank)
 {
 	int j;
@@ -1068,24 +1080,68 @@ static void omap_gpio_chip_init(struct gpio_bank *bank)
 
 	gpiochip_add(&bank->chip);
 
-	for (j = 0; j < bank->width; j++) {
-		int irq = irq_create_mapping(bank->domain, j);
-		irq_set_lockdep_class(irq, &gpio_lock_class);
-		irq_set_chip_data(irq, bank);
-		if (bank->is_mpuio) {
-			omap_mpuio_alloc_gc(bank, irq, bank->width);
-		} else {
-			irq_set_chip_and_handler(irq, &gpio_irq_chip,
-						 handle_simple_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-	}
+	/*
+	 * REVISIT these explicit calls to irq_create_mapping()
+	 * to do the GPIO to IRQ domain mapping for each GPIO in
+	 * the bank can be removed once all OMAP platforms have
+	 * been migrated to Device Tree boot only.
+	 * Since in DT boot irq_create_mapping() is called from
+	 * irq_create_of_mapping() only for the GPIO lines that
+	 * are used as interrupts.
+	 */
+	if (!omap_gpio_chip_boot_dt(&bank->chip))
+		for (j = 0; j < bank->width; j++)
+			irq_create_mapping(bank->domain, j);
 	irq_set_chained_handler(bank->irq, gpio_irq_handler);
 	irq_set_handler_data(bank->irq, bank);
 }
 
 static const struct of_device_id omap_gpio_match[];
 
+static int omap_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+			     irq_hw_number_t hwirq)
+{
+	struct gpio_bank *bank = d->host_data;
+	int gpio;
+	int ret;
+
+	if (!bank)
+		return -EINVAL;
+
+	irq_set_lockdep_class(virq, &gpio_lock_class);
+	irq_set_chip_data(virq, bank);
+	if (bank->is_mpuio) {
+		omap_mpuio_alloc_gc(bank, virq, bank->width);
+	} else {
+		irq_set_chip_and_handler(virq, &gpio_irq_chip,
+					 handle_simple_irq);
+		set_irq_flags(virq, IRQF_VALID);
+	}
+
+	/*
+	 * REVISIT most GPIO IRQ chip drivers need to call
+	 * gpio_request() before a GPIO line can be used as an
+	 * IRQ. Ideally this should be handled by the IRQ core
+	 * but until then this has to be done on a per driver
+	 * basis. Remove this once this is managed by the core.
+	 */
+	if (omap_gpio_chip_boot_dt(&bank->chip)) {
+		gpio = irq_to_gpio(bank, hwirq);
+		ret = gpio_request_one(gpio, GPIOF_IN, NULL);
+		if (ret) {
+			dev_err(bank->dev, "Could not request GPIO%d\n", gpio);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct irq_domain_ops omap_gpio_irq_ops = {
+	.xlate  = irq_domain_xlate_onetwocell,
+	.map    = omap_gpio_irq_map,
+};
+
 static int omap_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1151,10 +1207,10 @@ static int omap_gpio_probe(struct platform_device *pdev)
 	}
 
 	bank->domain = irq_domain_add_legacy(node, bank->width, irq_base,
-					     0, &irq_domain_simple_ops, NULL);
+					     0, &omap_gpio_irq_ops, bank);
 #else
 	bank->domain = irq_domain_add_linear(node, bank->width,
-					     &irq_domain_simple_ops, NULL);
+					     &omap_gpio_irq_ops, bank);
 #endif
 	if (!bank->domain) {
 		dev_err(dev, "Couldn't register an IRQ domain\n");