tty/serial: Add Spreadtrum sc9836-uart driver support

Add a full sc9836-uart driver for SC9836 SoC which is based on the
spreadtrum sharkl64 platform.
This driver also support earlycon.
Originally-by: Lanqing Liu <lanqing.liu@spreadtrum.com>
Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/Kconfig

@@ -1583,6 +1583,24 @@ config SERIAL_MEN_Z135
 	  This driver can also be build as a module. If so, the module will be called
 	  men_z135_uart.ko
 
+config SERIAL_SPRD
+	tristate "Support for Spreadtrum serial"
+	depends on ARCH_SPRD
+	select SERIAL_CORE
+	help
+	  This enables the driver for the Spreadtrum's serial.
+
+config SERIAL_SPRD_CONSOLE
+	bool "Spreadtrum UART console support"
+	depends on SERIAL_SPRD=y
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+	help
+	  Support for early debug console using Spreadtrum's serial. This enables
+	  the console before standard serial driver is probed. This is enabled
+	  with "earlycon" on the kernel command line. The console is
+	  enabled when early_param is processed.
+
 endmenu
 
 config SERIAL_MCTRL_GPIO

drivers/tty/serial/Makefile

@@ -93,6 +93,7 @@ obj-$(CONFIG_SERIAL_RP2)	+= rp2.o
 obj-$(CONFIG_SERIAL_FSL_LPUART)	+= fsl_lpuart.o
 obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR)	+= digicolor-usart.o
 obj-$(CONFIG_SERIAL_MEN_Z135)	+= men_z135_uart.o
+obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
 
 # GPIOLIB helpers for modem control lines
 obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o

include/uapi/linux/serial_core.h

@@ -252,4 +252,7 @@
 /* Conexant Digicolor */
 #define PORT_DIGICOLOR	110
 
+/* SPRD SERIAL  */
+#define PORT_SPRD	111
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */