ARM: sun4i: dt: Fix A10 SoC bus base address

There was a typo in the base address used for the soc node in the A10
device tree. Fix it with the proper base address.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -26,7 +26,7 @@ chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&emac_pins_a>;

arch/arm/boot/dts/sun4i-a10-hackberry.dts

@@ -22,7 +22,7 @@ chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&emac_pins_a>;

arch/arm/boot/dts/sun4i-a10-mini-xplus.dts

@@ -22,7 +22,7 @@ chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -160,7 +160,7 @@ apb1_gates: apb1_gates@01c2006c {
 		};
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;