sh: SH7780 Solution Engine board support.

This adds support for the SH7780-based Solution Engine reference board.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/Kconfig

@@ -99,6 +99,14 @@ config SH_7751_SOLUTION_ENGINE
 	help
 	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
 	  evaluation board.
+	  
+config SH_7780_SOLUTION_ENGINE
+	bool "SolutionEngine7780"
+	select SOLUTION_ENGINE
+	select CPU_SUBTYPE_SH7780
+	help
+	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
+	  evaluation board.
 
 config SH_7300_SOLUTION_ENGINE
 	bool "SolutionEngine7300"

arch/sh/Makefile

@@ -89,6 +89,7 @@ core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
 # Boards
 machdir-$(CONFIG_SH_SOLUTION_ENGINE)		:= se/770x
 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	:= se/7751
+machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	:= se/7780
 machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	:= se/7300
 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	:= se/7343
 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	:= se/73180

arch/sh/boards/se/7780/Makefile

+#
+# Makefile for the HITACHI UL SolutionEngine 7780 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o

arch/sh/boards/se/7780/irq.c

+/*
+ * linux/arch/sh/boards/se/7780/irq.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/se7780.h>
+
+#define INTC_INTMSK0             0xFFD00044
+#define INTC_INTMSKCLR0          0xFFD00064
+
+static void disable_se7780_irq(unsigned int irq)
+{
+	struct intc2_data *p = get_irq_chip_data(irq);
+	ctrl_outl(1 << p->msk_shift, INTC_INTMSK0 + p->msk_offset);
+}
+
+static void enable_se7780_irq(unsigned int irq)
+{
+	struct intc2_data *p = get_irq_chip_data(irq);
+	ctrl_outl(1 << p->msk_shift, INTC_INTMSKCLR0 + p->msk_offset);
+}
+
+static struct irq_chip se7780_irq_chip __read_mostly = {
+	.name           = "SE7780",
+	.mask           = disable_se7780_irq,
+	.unmask         = enable_se7780_irq,
+	.mask_ack       = disable_se7780_irq,
+};
+
+static struct intc2_data intc2_irq_table[] = {
+	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */
+	{ 4,  0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */
+	{ 6,  0, 29, 0, 29, 3 }, /* daughter board EXTINT3 */
+	{ 8,  0, 28, 0, 28, 3 }, /* SMC 91C111 (LAN) */
+	{ 10, 0, 27, 0, 27, 3 }, /* daughter board EXTINT4 */
+	{ 4,  0, 30, 0, 30, 3 }, /* daughter board EXTINT5 */
+	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT6 */
+	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT7 */
+	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT8 */
+	{ 0 , 0, 24, 0, 24, 3 }, /* SM501 */
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7780_IRQ(void)
+{
+	int i ;
+
+	/* enable all interrupt at FPGA */
+	ctrl_outw(0, FPGA_INTMSK1);
+	/* mask SM501 interrupt */
+	ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+	/* enable all interrupt at FPGA */
+	ctrl_outw(0, FPGA_INTMSK2);
+
+	/* set FPGA INTSEL register */
+	/* FPGA + 0x06 */
+	ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
+		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
+
+	/* FPGA + 0x08 */
+	ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
+		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
+		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
+
+	/* FPGA + 0x0A */
+	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+
+	for (i = 0; i < ARRAY_SIZE(intc2_irq_table); i++) {
+		disable_irq_nosync(intc2_irq_table[i].irq);
+		set_irq_chip_and_handler_name( intc2_irq_table[i].irq, &se7780_irq_chip,
+			handle_level_irq, "level");
+		set_irq_chip_data( intc2_irq_table[i].irq, &intc2_irq_table[i] );
+		disable_se7780_irq(intc2_irq_table[i].irq);
+	}
+}

arch/sh/boards/se/7780/setup.c

+/*
+ * linux/arch/sh/boards/se/7780/setup.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/se7780.h>
+#include <asm/io.h>
+
+/* Heartbeat */
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev    = {
+		.platform_data  = heartbeat_bit_pos,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *se7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init se7780_devices_setup(void)
+{
+	return platform_add_devices(se7780_devices,
+		ARRAY_SIZE(se7780_devices));
+}
+device_initcall(se7780_devices_setup);
+
+#define GPIO_PHCR        0xFFEA000E
+#define GPIO_PMSELR      0xFFEA0080
+#define GPIO_PECR        0xFFEA0008
+
+static void __init se7780_setup(char **cmdline_p)
+{
+	/* "SH-Linux" on LED Display */
+	ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+	ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+	ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+	ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+	ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+	ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+	ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+	ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+
+	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
+
+	/*
+	 * PCI REQ/GNT setting
+	 *   REQ0/GNT0 -> USB
+	 *   REQ1/GNT1 -> PC Card
+	 *   REQ2/GNT2 -> Serial ATA
+	 *   REQ3/GNT3 -> PCI slot
+	 */
+	ctrl_outw(0x0213, FPGA_REQSEL);
+
+	/* GPIO setting */
+	ctrl_outw(0x0000, GPIO_PECR);
+	ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+	ctrl_outw(0x0c00, GPIO_PMSELR);
+
+	/* iVDR Power ON */
+	ctrl_outw(0x0001, FPGA_IVDRPW);
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name                = "Solution Engine 7780" ,
+	.mv_setup               = se7780_setup ,
+	.mv_nr_irqs		= 111 ,
+	.mv_init_irq		= init_se7780_IRQ,
+};
+ALIAS_MV(se7780)

arch/sh/drivers/pci/pci-sh7780.c

@@ -72,12 +72,27 @@ static int __init sh7780_pci_init(void)
 	}
 
 	/* Setup the INTC */
-	ctrl_outl(0x00200000, INTC_ICR0);	/* INTC SH-4 Mode */
-	ctrl_outl(0x00078000, INTC_INT2MSKCR);	/* enable PCIINTA - PCIINTD */
-	ctrl_outl(0x40000000, INTC_INTMSK1);	/* disable IRL4-7 Interrupt */
-	ctrl_outl(0x0000fffe, INTC_INTMSK2);	/* disable IRL4-7 Interrupt */
-	ctrl_outl(0x80000000, INTC_INTMSKCLR1);	/* enable IRL0-3 Interrupt */
-	ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);	/* enable IRL0-3 Interrupt */
+	if (mach_is_7780se()) {
+		/* ICR0: IRL=use separately */
+		ctrl_outl(0x00C00020, INTC_ICR0);
+		/* ICR1: detect low level(for 2ndcut) */
+		ctrl_outl(0xAAAA0000, INTC_ICR1);
+		/* INTPRI: priority=3(all) */
+		ctrl_outl(0x33333333, INTC_INTPRI);
+	} else {
+		/* INTC SH-4 Mode */
+		ctrl_outl(0x00200000, INTC_ICR0);
+		/* enable PCIINTA - PCIINTD */
+		ctrl_outl(0x00078000, INTC_INT2MSKCR);
+		/* disable IRL4-7 Interrupt */
+		ctrl_outl(0x40000000, INTC_INTMSK1);
+		/* disable IRL4-7 Interrupt */
+		ctrl_outl(0x0000fffe, INTC_INTMSK2);
+		/* enable IRL0-3 Interrupt */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		/* enable IRL0-3 Interrupt */
+		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+	}
 
 	if ((ret = sh4_pci_check_direct()) != 0)
 		return ret;
@@ -147,9 +162,8 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
 	 * DMA interrupts...
 	 */
 
-#ifdef CONFIG_SH_HIGHLANDER
+	/* Apply any last-minute PCIC fixups */
 	pci_fixup_pcic();
-#endif
 
 	/* SH7780 init done, set central function init complete */
 	/* use round robin mode to stop a device starving/overruning */

arch/sh/drivers/pci/pci-sh7780.h

@@ -66,6 +66,22 @@
 #define SH7780_PCIPMCSR_BSE	0x046
 #define SH7780_PCICDD		0x047
 
+#define SH7780_PCICR		0x100		/* PCI Control Register */
+#define SH7780_PCILSR		0x104		/* PCI Local Space Register0 */
+#define SH7780_PCILSR1		0x108		/* PCI Local Space Register1 */
+#define SH7780_PCILAR0		0x10C		/* PCI Local Address Register1 */
+#define SH7780_PCILAR1		0x110		/* PCI Local Address Register1 */
+#define SH7780_PCIIR		0x114		/* PCI Interrupt Register */
+#define SH7780_PCIIMR		0x118		/* PCI Interrupt Mask Register */
+#define SH7780_PCIAIR		0x11C		/* Error Address Register */
+#define SH7780_PCICIR		0x120		/* Error Command/Data Register */
+#define SH7780_PCIAINT		0x130		/* Arbiter Interrupt Register */
+#define SH7780_PCIAINTM		0x134		/* Arbiter Int. Mask Register */
+#define SH7780_PCIBMIR		0x138		/* Error Bus Master Register */
+#define SH7780_PCIPAR		0x1C0		/* PIO Address Register */
+#define SH7780_PCIPINT		0x1CC		/* Power Mgmnt Int. Register */
+#define SH7780_PCIPINTM		0x1D0		/* Power Mgmnt Mask Register */
+
 #define SH7780_PCIMBR0		0x1E0
 #define SH7780_PCIMBMR0		0x1E4
 #define SH7780_PCIMBR2		0x1F0

arch/sh/tools/mach-types

@@ -9,6 +9,7 @@ SE			SH_SOLUTION_ENGINE
 7751SE			SH_7751_SOLUTION_ENGINE		
 7300SE			SH_7300_SOLUTION_ENGINE
 7343SE			SH_7343_SOLUTION_ENGINE
+7780SE			SH_7780_SOLUTION_ENGINE
 73180SE			SH_73180_SOLUTION_ENGINE
 7751SYSTEMH		SH_7751_SYSTEMH
 HP6XX			SH_HP6XX

include/asm-sh/se7780.h

+#ifndef __ASM_SH_SE7780_H
+#define __ASM_SH_SE7780_H
+
+/*
+ * linux/include/asm-sh/se7780.h
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SM501	PA_EXT1		/* Graphic IC (SM501) */
+#define PA_SM501_SIZE	PA_EXT1_SIZE	/* Graphic IC (SM501) */
+#define PA_SDRAM	0xa8000000	/* DDR-SDRAM(Area2/3) 128MB */
+#define PA_SDRAM_SIZE	0x08000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+#define PA_EXT_FLASH	PA_EXT4		/* Expansion Flash-ROM */
+
+#define PA_PERIPHERAL	PA_AREA6_IO	/* SW6-6=ON */
+
+#define PA_LAN		(PA_PERIPHERAL + 0)		/* SMC LAN91C111 */
+#define PA_LED_DISP	(PA_PERIPHERAL + 0x02000000)	/* 8words LED Display */
+#define DISP_CHAR_RAM	(7 << 3)
+#define DISP_SEL0_ADDR	(DISP_CHAR_RAM + 0)
+#define DISP_SEL1_ADDR	(DISP_CHAR_RAM + 1)
+#define DISP_SEL2_ADDR	(DISP_CHAR_RAM + 2)
+#define DISP_SEL3_ADDR	(DISP_CHAR_RAM + 3)
+#define DISP_SEL4_ADDR	(DISP_CHAR_RAM + 4)
+#define DISP_SEL5_ADDR	(DISP_CHAR_RAM + 5)
+#define DISP_SEL6_ADDR	(DISP_CHAR_RAM + 6)
+#define DISP_SEL7_ADDR	(DISP_CHAR_RAM + 7)
+
+#define DISP_UDC_RAM	(5 << 3)
+#define PA_FPGA		(PA_PERIPHERAL + 0x03000000) /* FPGA base address */
+
+/* FPGA register address and bit */
+#define FPGA_SFTRST		(PA_FPGA + 0)	/* Soft reset register */
+#define FPGA_INTMSK1		(PA_FPGA + 2)	/* Interrupt Mask register 1 */
+#define FPGA_INTMSK2		(PA_FPGA + 4)	/* Interrupt Mask register 2 */
+#define FPGA_INTSEL1		(PA_FPGA + 6)	/* Interrupt select register 1 */
+#define FPGA_INTSEL2		(PA_FPGA + 8)	/* Interrupt select register 2 */
+#define FPGA_INTSEL3		(PA_FPGA + 10)	/* Interrupt select register 3 */
+#define FPGA_PCI_INTSEL1	(PA_FPGA + 12)	/* PCI Interrupt select register 1 */
+#define FPGA_PCI_INTSEL2	(PA_FPGA + 14)	/* PCI Interrupt select register 2 */
+#define FPGA_INTSET		(PA_FPGA + 16)	/* IRQ/IRL select register */
+#define FPGA_INTSTS1		(PA_FPGA + 18)	/* Interrupt status register 1 */
+#define FPGA_INTSTS2		(PA_FPGA + 20)	/* Interrupt status register 2 */
+#define FPGA_REQSEL		(PA_FPGA + 22)	/* REQ/GNT select register */
+#define FPGA_DBG_LED		(PA_FPGA + 32)	/* Debug LED(D-LED[8:1] */
+#define PA_LED			FPGA_DBG_LED
+#define FPGA_IVDRID		(PA_FPGA + 36)	/* iVDR ID Register */
+#define FPGA_IVDRPW		(PA_FPGA + 38)	/* iVDR Power ON Register */
+#define FPGA_MMCID		(PA_FPGA + 40)	/* MMC ID Register */
+
+/* FPGA INTSEL position */
+/* INTSEL1 */
+#define IRQPOS_SMC91CX          (0 * 4)
+#define IRQPOS_SM501            (1 * 4)
+/* INTSEL2 */
+#define IRQPOS_EXTINT1          (0 * 4)
+#define IRQPOS_EXTINT2          (1 * 4)
+#define IRQPOS_EXTINT3          (2 * 4)
+#define IRQPOS_EXTINT4          (3 * 4)
+/* INTSEL3 */
+#define IRQPOS_PCCPW            (0 * 4)
+
+/* IDE interrupt */
+#define IRQ_IDE0                67 /* iVDR */
+
+/* SMC interrupt */
+#define SMC_IRQ                 8
+
+/* SM501 interrupt */
+#define SM501_IRQ               0
+
+/* interrupt pin */
+#define IRQPIN_EXTINT1          0 /* IRQ0 pin */
+#define IRQPIN_EXTINT2          1 /* IRQ1 pin */
+#define IRQPIN_EXTINT3          2 /* IRQ2 pin */
+#define IRQPIN_SMC91CX          3 /* IRQ3 pin */
+#define IRQPIN_EXTINT4          4 /* IRQ4 pin */
+#define IRQPIN_PCC0             5 /* IRQ5 pin */
+#define IRQPIN_PCC2             6 /* IRQ6 pin */
+#define IRQPIN_SM501            7 /* IRQ7 pin */
+#define IRQPIN_PCCPW            7 /* IRQ7 pin */
+
+/* arch/sh/boards/se/7780/irq.c */
+void init_se7780_IRQ(void);
+
+#define __IO_PREFIX		se7780
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7780_H */