x86/xen: Rename SYS* entry points

Native SYS{CALL,ENTER} entry points are called
entry_SYS{CALL,ENTER}_{64,compat}, make sure the Xen versions are
named consistently.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

arch/x86/xen/setup.c

@@ -918,7 +918,7 @@ void xen_enable_sysenter(void)
 	if (!boot_cpu_has(sysenter_feature))
 		return;
 
-	ret = register_callback(CALLBACKTYPE_sysenter, xen_sysenter_target);
+	ret = register_callback(CALLBACKTYPE_sysenter, xen_entry_SYSENTER_compat);
 	if(ret != 0)
 		setup_clear_cpu_cap(sysenter_feature);
 }
@@ -927,7 +927,7 @@ void xen_enable_syscall(void)
 {
 	int ret;
 
-	ret = register_callback(CALLBACKTYPE_syscall, xen_syscall_target);
+	ret = register_callback(CALLBACKTYPE_syscall, xen_entry_SYSCALL_64);
 	if (ret != 0) {
 		printk(KERN_ERR "Failed to set syscall callback: %d\n", ret);
 		/* Pretty fatal; 64-bit userspace has no other
@@ -936,7 +936,7 @@ void xen_enable_syscall(void)
 
 	if (boot_cpu_has(X86_FEATURE_SYSCALL32)) {
 		ret = register_callback(CALLBACKTYPE_syscall32,
-					xen_syscall32_target);
+					xen_entry_SYSCALL_compat);
 		if (ret != 0)
 			setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
 	}

arch/x86/xen/xen-asm.S

@@ -234,7 +234,7 @@ SYM_CODE_END(xenpv_restore_regs_and_return_to_usermode)
  */
 
 /* Normal 64-bit system call target */
-SYM_CODE_START(xen_syscall_target)
+SYM_CODE_START(xen_entry_SYSCALL_64)
 	UNWIND_HINT_EMPTY
 	ENDBR
 	popq %rcx
@@ -249,12 +249,12 @@ SYM_CODE_START(xen_syscall_target)
 	movq $__USER_CS, 1*8(%rsp)
 
 	jmp entry_SYSCALL_64_after_hwframe
-SYM_CODE_END(xen_syscall_target)
+SYM_CODE_END(xen_entry_SYSCALL_64)
 
 #ifdef CONFIG_IA32_EMULATION
 
 /* 32-bit compat syscall target */
-SYM_CODE_START(xen_syscall32_target)
+SYM_CODE_START(xen_entry_SYSCALL_compat)
 	UNWIND_HINT_EMPTY
 	ENDBR
 	popq %rcx
@@ -269,10 +269,10 @@ SYM_CODE_START(xen_syscall32_target)
 	movq $__USER32_CS, 1*8(%rsp)
 
 	jmp entry_SYSCALL_compat_after_hwframe
-SYM_CODE_END(xen_syscall32_target)
+SYM_CODE_END(xen_entry_SYSCALL_compat)
 
 /* 32-bit compat sysenter target */
-SYM_CODE_START(xen_sysenter_target)
+SYM_CODE_START(xen_entry_SYSENTER_compat)
 	UNWIND_HINT_EMPTY
 	ENDBR
 	/*
@@ -291,19 +291,19 @@ SYM_CODE_START(xen_sysenter_target)
 	movq $__USER32_CS, 1*8(%rsp)
 
 	jmp entry_SYSENTER_compat_after_hwframe
-SYM_CODE_END(xen_sysenter_target)
+SYM_CODE_END(xen_entry_SYSENTER_compat)
 
 #else /* !CONFIG_IA32_EMULATION */
 
-SYM_CODE_START(xen_syscall32_target)
-SYM_CODE_START(xen_sysenter_target)
+SYM_CODE_START(xen_entry_SYSCALL_compat)
+SYM_CODE_START(xen_entry_SYSENTER_compat)
 	UNWIND_HINT_EMPTY
 	ENDBR
 	lea 16(%rsp), %rsp	/* strip %rcx, %r11 */
 	mov $-ENOSYS, %rax
 	pushq $0
 	jmp hypercall_iret
-SYM_CODE_END(xen_sysenter_target)
-SYM_CODE_END(xen_syscall32_target)
+SYM_CODE_END(xen_entry_SYSENTER_compat)
+SYM_CODE_END(xen_entry_SYSCALL_compat)
 
 #endif	/* CONFIG_IA32_EMULATION */

arch/x86/xen/xen-ops.h

@@ -10,10 +10,10 @@
 /* These are code, but not functions.  Defined in entry.S */
 extern const char xen_failsafe_callback[];
 
-void xen_sysenter_target(void);
+void xen_entry_SYSENTER_compat(void);
 #ifdef CONFIG_X86_64
-void xen_syscall_target(void);
-void xen_syscall32_target(void);
+void xen_entry_SYSCALL_64(void);
+void xen_entry_SYSCALL_compat(void);
 #endif
 
 extern void *xen_initial_gdt;