Commit b7874e44 authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Mark Brown

ASoC: neo1973_gta02_wm8753: Use gpio_request_array to request gpios

Using gpio_request_array instead of requesting and setting up each gpio by hand
makes the code more readable and more compact.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Acked-by: default avatarLiam Girdwood <lrg@ti.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent da70a3e9
......@@ -370,6 +370,11 @@ static struct snd_soc_card neo1973_gta02 = {
.num_links = ARRAY_SIZE(neo1973_gta02_dai),
};
static const struct gpio neo1973_gta02_gpios[] = {
{ GTA02_GPIO_HP_IN, GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
{ GTA02_GPIO_AMP_SHUT, GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
};
static struct platform_device *neo1973_gta02_snd_device;
static int __init neo1973_gta02_init(void)
......@@ -382,9 +387,16 @@ static int __init neo1973_gta02_init(void)
return -ENODEV;
}
ret = gpio_request_array(neo1973_gta02_gpios,
ARRAY_SIZE(neo1973_gta02_gpios));
if (ret)
return ret;
neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1);
if (!neo1973_gta02_snd_device)
return -ENOMEM;
if (!neo1973_gta02_snd_device) {
ret = -ENOMEM;
goto err_gpio_free;
}
/* register bluetooth DAI here */
ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, &bt_dai);
......@@ -397,43 +409,14 @@ static int __init neo1973_gta02_init(void)
if (ret)
goto err_unregister_dai;
/* Initialise GPIOs used by amp */
ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN");
if (ret) {
pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN);
goto err_del_device;
}
ret = gpio_direction_output(GTA02_GPIO_HP_IN, 1);
if (ret) {
pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN);
goto err_free_gpio_hp_in;
}
ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT");
if (ret) {
pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT);
goto err_free_gpio_hp_in;
}
ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1);
if (ret) {
pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT);
goto err_free_gpio_amp_shut;
}
return 0;
err_free_gpio_amp_shut:
gpio_free(GTA02_GPIO_AMP_SHUT);
err_free_gpio_hp_in:
gpio_free(GTA02_GPIO_HP_IN);
err_del_device:
platform_device_del(neo1973_gta02_snd_device);
err_unregister_dai:
snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev);
err_put_device:
platform_device_put(neo1973_gta02_snd_device);
err_gpio_free:
gpio_free_array(neo1973_gta02_gpios, ARRAY_SIZE(neo1973_gta02_gpios));
return ret;
}
module_init(neo1973_gta02_init);
......@@ -442,8 +425,7 @@ static void __exit neo1973_gta02_exit(void)
{
snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev);
platform_device_unregister(neo1973_gta02_snd_device);
gpio_free(GTA02_GPIO_HP_IN);
gpio_free(GTA02_GPIO_AMP_SHUT);
gpio_free_array(neo1973_gta02_gpios, ARRAY_SIZE(neo1973_gta02_gpios));
}
module_exit(neo1973_gta02_exit);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment