Commit b79c3670 authored by Martin Blumenstingl's avatar Martin Blumenstingl Committed by Thierry Reding

pwm: meson: Don't duplicate the polarity internally

Let meson_pwm_calc() use the polarity from struct pwm_state directly.
This removes a level of indirection where meson_pwm_apply() first had to
set a driver-internal inverter mask which was then only used by
meson_pwm_calc().

Instead of adding the polarity as parameter to meson_pwm_calc() switch
to struct pwm_state directly to make it easier to see where the
parameters are actually coming from.
Reviewed-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: default avatarThierry Reding <thierry.reding@gmail.com>
parent 33cefd84
...@@ -63,7 +63,6 @@ struct meson_pwm { ...@@ -63,7 +63,6 @@ struct meson_pwm {
struct pwm_chip chip; struct pwm_chip chip;
const struct meson_pwm_data *data; const struct meson_pwm_data *data;
void __iomem *base; void __iomem *base;
u8 inverter_mask;
/* /*
* Protects register (write) access to the REG_MISC_AB register * Protects register (write) access to the REG_MISC_AB register
* that is shared between the two PWMs. * that is shared between the two PWMs.
...@@ -116,14 +115,17 @@ static void meson_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) ...@@ -116,14 +115,17 @@ static void meson_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
} }
static int meson_pwm_calc(struct meson_pwm *meson, static int meson_pwm_calc(struct meson_pwm *meson,
struct meson_pwm_channel *channel, unsigned int id, struct meson_pwm_channel *channel,
unsigned int duty, unsigned int period) struct pwm_state *state)
{ {
unsigned int pre_div, cnt, duty_cnt; unsigned int duty, period, pre_div, cnt, duty_cnt;
unsigned long fin_freq = -1; unsigned long fin_freq = -1;
u64 fin_ps; u64 fin_ps;
if (~(meson->inverter_mask >> id) & 0x1) duty = state->duty_cycle;
period = state->period;
if (state->polarity == PWM_POLARITY_INVERSED)
duty = period - duty; duty = period - duty;
if (period == channel->state.period && if (period == channel->state.period &&
...@@ -278,15 +280,7 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, ...@@ -278,15 +280,7 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
if (state->period != channel->state.period || if (state->period != channel->state.period ||
state->duty_cycle != channel->state.duty_cycle || state->duty_cycle != channel->state.duty_cycle ||
state->polarity != channel->state.polarity) { state->polarity != channel->state.polarity) {
if (state->polarity != channel->state.polarity) { err = meson_pwm_calc(meson, channel, state);
if (state->polarity == PWM_POLARITY_NORMAL)
meson->inverter_mask |= BIT(pwm->hwpwm);
else
meson->inverter_mask &= ~BIT(pwm->hwpwm);
}
err = meson_pwm_calc(meson, channel, pwm->hwpwm,
state->duty_cycle, state->period);
if (err < 0) if (err < 0)
return err; return err;
...@@ -529,7 +523,6 @@ static int meson_pwm_probe(struct platform_device *pdev) ...@@ -529,7 +523,6 @@ static int meson_pwm_probe(struct platform_device *pdev)
meson->chip.of_pwm_n_cells = 3; meson->chip.of_pwm_n_cells = 3;
meson->data = of_device_get_match_data(&pdev->dev); meson->data = of_device_get_match_data(&pdev->dev);
meson->inverter_mask = BIT(meson->chip.npwm) - 1;
channels = devm_kcalloc(&pdev->dev, meson->chip.npwm, channels = devm_kcalloc(&pdev->dev, meson->chip.npwm,
sizeof(*channels), GFP_KERNEL); sizeof(*channels), GFP_KERNEL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment