Commit b7dfee24 authored by Marek Vasut's avatar Marek Vasut Committed by Philipp Zabel

gpu: ipu-v3: Fix CSI selection for VDIC

The description of the CSI_SEL bit in the i.MX6 reference manual is
incorrect. It states "This bit defines which CSI is the input to the
IC. This bit is effective only if IC_INPUT is bit cleared".

From experiment it was found this is in fact not correct. The CSI_SEL
bit selects which CSI is input to _both_ the VDIC _and_ the IC. If the
IC_INPUT bit is set so that the IC is receiving from the VDIC, the IC
ignores the CSI_SEL bit, but CSI_SEL still selects which CSI the VDIC
receives from in that case.
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Signed-off-by: default avatarSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
parent e36aecba
......@@ -725,15 +725,16 @@ void ipu_set_ic_src_mux(struct ipu_soc *ipu, int csi_id, bool vdi)
spin_lock_irqsave(&ipu->lock, flags);
val = ipu_cm_read(ipu, IPU_CONF);
if (vdi) {
if (vdi)
val |= IPU_CONF_IC_INPUT;
} else {
else
val &= ~IPU_CONF_IC_INPUT;
if (csi_id == 1)
val |= IPU_CONF_CSI_SEL;
else
val &= ~IPU_CONF_CSI_SEL;
}
if (csi_id == 1)
val |= IPU_CONF_CSI_SEL;
else
val &= ~IPU_CONF_CSI_SEL;
ipu_cm_write(ipu, val, IPU_CONF);
spin_unlock_irqrestore(&ipu->lock, flags);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment