Merge branch 'ethtool-consolidate-irq-coalescing-part-5'

Jakub Kicinski says:

====================
ethtool: consolidate irq coalescing - part 5

Convert more drivers following the groundwork laid in a recent
patch set [1] and continued in [2], [3], [4]. The aim of the effort
is to consolidate irq coalescing parameter validation in the core.

This set converts further 15 drivers in drivers/net/ethernet.
One more conversion sets to come.

[1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/
[2] https://lore.kernel.org/netdev/20200306010602.1620354-1-kuba@kernel.org/
[3] https://lore.kernel.org/netdev/20200310021512.1861626-1-kuba@kernel.org/
[4] https://lore.kernel.org/netdev/20200311223302.2171564-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/jme.c

@@ -2839,6 +2839,9 @@ jme_set_eeprom(struct net_device *netdev,
 }
 
 static const struct ethtool_ops jme_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES |
+				     ETHTOOL_COALESCE_USE_ADAPTIVE_RX,
 	.get_drvinfo            = jme_get_drvinfo,
 	.get_regs_len		= jme_get_regs_len,
 	.get_regs		= jme_get_regs,

drivers/net/ethernet/marvell/mv643xx_eth.c

@@ -1737,6 +1737,7 @@ static int mv643xx_eth_get_sset_count(struct net_device *dev, int sset)
 }
 
 static const struct ethtool_ops mv643xx_eth_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS,
 	.get_drvinfo		= mv643xx_eth_get_drvinfo,
 	.nway_reset		= phy_ethtool_nway_reset,
 	.get_link		= ethtool_op_get_link,

drivers/net/ethernet/marvell/mvneta.c

@@ -4838,6 +4838,8 @@ static const struct net_device_ops mvneta_netdev_ops = {
 };
 
 static const struct ethtool_ops mvneta_eth_tool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
 	.nway_reset	= mvneta_ethtool_nway_reset,
 	.get_link       = ethtool_op_get_link,
 	.set_coalesce   = mvneta_ethtool_set_coalesce,

drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c

@@ -4384,6 +4384,8 @@ static const struct net_device_ops mvpp2_netdev_ops = {
 };
 
 static const struct ethtool_ops mvpp2_eth_tool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
 	.nway_reset		= mvpp2_ethtool_nway_reset,
 	.get_link		= ethtool_op_get_link,
 	.set_coalesce		= mvpp2_ethtool_set_coalesce,

drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c

@@ -368,17 +368,6 @@ static int otx2_set_coalesce(struct net_device *netdev,
 	struct otx2_hw *hw = &pfvf->hw;
 	int qidx;
 
-	if (ec->use_adaptive_rx_coalesce || ec->use_adaptive_tx_coalesce ||
-	    ec->rx_coalesce_usecs_irq || ec->rx_max_coalesced_frames_irq ||
-	    ec->tx_coalesce_usecs_irq || ec->tx_max_coalesced_frames_irq ||
-	    ec->stats_block_coalesce_usecs || ec->pkt_rate_low ||
-	    ec->rx_coalesce_usecs_low || ec->rx_max_coalesced_frames_low ||
-	    ec->tx_coalesce_usecs_low || ec->tx_max_coalesced_frames_low ||
-	    ec->pkt_rate_high || ec->rx_coalesce_usecs_high ||
-	    ec->rx_max_coalesced_frames_high || ec->tx_coalesce_usecs_high ||
-	    ec->tx_max_coalesced_frames_high || ec->rate_sample_interval)
-		return -EOPNOTSUPP;
-
 	if (!ec->rx_max_coalesced_frames || !ec->tx_max_coalesced_frames)
 		return 0;
 
@@ -674,6 +663,8 @@ static u32 otx2_get_link(struct net_device *netdev)
 }
 
 static const struct ethtool_ops otx2_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
 	.get_link		= otx2_get_link,
 	.get_drvinfo		= otx2_get_drvinfo,
 	.get_strings		= otx2_get_strings,

drivers/net/ethernet/marvell/skge.c

@@ -876,6 +876,7 @@ static int skge_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
 }
 
 static const struct ethtool_ops skge_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS,
 	.get_drvinfo	= skge_get_drvinfo,
 	.get_regs_len	= skge_get_regs_len,
 	.get_regs	= skge_get_regs,

drivers/net/ethernet/marvell/sky2.c

@@ -4400,6 +4400,10 @@ static int sky2_set_features(struct net_device *dev, netdev_features_t features)
 }
 
 static const struct ethtool_ops sky2_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES |
+				     ETHTOOL_COALESCE_RX_USECS_IRQ |
+				     ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ,
 	.get_drvinfo	= sky2_get_drvinfo,
 	.get_wol	= sky2_get_wol,
 	.set_wol	= sky2_set_wol,

drivers/net/ethernet/myricom/myri10ge/myri10ge.c

@@ -1920,6 +1920,7 @@ myri10ge_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
 }
 
 static const struct ethtool_ops myri10ge_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS,
 	.get_drvinfo = myri10ge_get_drvinfo,
 	.get_coalesce = myri10ge_get_coalesce,
 	.set_coalesce = myri10ge_set_coalesce,

drivers/net/ethernet/ni/nixge.c

@@ -1019,27 +1019,6 @@ static int nixge_ethtools_set_coalesce(struct net_device *ndev,
 		return -EBUSY;
 	}
 
-	if (ecoalesce->rx_coalesce_usecs ||
-	    ecoalesce->rx_coalesce_usecs_irq ||
-	    ecoalesce->rx_max_coalesced_frames_irq ||
-	    ecoalesce->tx_coalesce_usecs ||
-	    ecoalesce->tx_coalesce_usecs_irq ||
-	    ecoalesce->tx_max_coalesced_frames_irq ||
-	    ecoalesce->stats_block_coalesce_usecs ||
-	    ecoalesce->use_adaptive_rx_coalesce ||
-	    ecoalesce->use_adaptive_tx_coalesce ||
-	    ecoalesce->pkt_rate_low ||
-	    ecoalesce->rx_coalesce_usecs_low ||
-	    ecoalesce->rx_max_coalesced_frames_low ||
-	    ecoalesce->tx_coalesce_usecs_low ||
-	    ecoalesce->tx_max_coalesced_frames_low ||
-	    ecoalesce->pkt_rate_high ||
-	    ecoalesce->rx_coalesce_usecs_high ||
-	    ecoalesce->rx_max_coalesced_frames_high ||
-	    ecoalesce->tx_coalesce_usecs_high ||
-	    ecoalesce->tx_max_coalesced_frames_high ||
-	    ecoalesce->rate_sample_interval)
-		return -EOPNOTSUPP;
 	if (ecoalesce->rx_max_coalesced_frames)
 		priv->coalesce_count_rx = ecoalesce->rx_max_coalesced_frames;
 	if (ecoalesce->tx_max_coalesced_frames)
@@ -1083,6 +1062,7 @@ static int nixge_ethtools_set_phys_id(struct net_device *ndev,
 }
 
 static const struct ethtool_ops nixge_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_MAX_FRAMES,
 	.get_drvinfo    = nixge_ethtools_get_drvinfo,
 	.get_coalesce   = nixge_ethtools_get_coalesce,
 	.set_coalesce   = nixge_ethtools_set_coalesce,

drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c

@@ -748,24 +748,7 @@ static int netxen_set_intr_coalesce(struct net_device *netdev,
 	if (ethcoal->rx_coalesce_usecs > 0xffff ||
 		ethcoal->rx_max_coalesced_frames > 0xffff ||
 		ethcoal->tx_coalesce_usecs > 0xffff ||
-		ethcoal->tx_max_coalesced_frames > 0xffff ||
-		ethcoal->rx_coalesce_usecs_irq ||
-		ethcoal->rx_max_coalesced_frames_irq ||
-		ethcoal->tx_coalesce_usecs_irq ||
-		ethcoal->tx_max_coalesced_frames_irq ||
-		ethcoal->stats_block_coalesce_usecs ||
-		ethcoal->use_adaptive_rx_coalesce ||
-		ethcoal->use_adaptive_tx_coalesce ||
-		ethcoal->pkt_rate_low ||
-		ethcoal->rx_coalesce_usecs_low ||
-		ethcoal->rx_max_coalesced_frames_low ||
-		ethcoal->tx_coalesce_usecs_low ||
-		ethcoal->tx_max_coalesced_frames_low ||
-		ethcoal->pkt_rate_high ||
-		ethcoal->rx_coalesce_usecs_high ||
-		ethcoal->rx_max_coalesced_frames_high ||
-		ethcoal->tx_coalesce_usecs_high ||
-		ethcoal->tx_max_coalesced_frames_high)
+		ethcoal->tx_max_coalesced_frames > 0xffff)
 		return -EINVAL;
 
 	if (!ethcoal->rx_coalesce_usecs ||
@@ -923,6 +906,8 @@ netxen_get_dump_data(struct net_device *netdev, struct ethtool_dump *dump,
 }
 
 const struct ethtool_ops netxen_nic_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
 	.get_drvinfo = netxen_nic_get_drvinfo,
 	.get_regs_len = netxen_nic_get_regs_len,
 	.get_regs = netxen_nic_get_regs,

drivers/net/ethernet/qlogic/qede/qede_ethtool.c

@@ -2087,6 +2087,7 @@ static int qede_get_dump_data(struct net_device *dev,
 }
 
 static const struct ethtool_ops qede_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS,
 	.get_link_ksettings = qede_get_link_ksettings,
 	.set_link_ksettings = qede_set_link_ksettings,
 	.get_drvinfo = qede_get_drvinfo,
@@ -2133,6 +2134,7 @@ static const struct ethtool_ops qede_ethtool_ops = {
 };
 
 static const struct ethtool_ops qede_vf_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS,
 	.get_link_ksettings = qede_get_link_ksettings,
 	.get_drvinfo = qede_get_drvinfo,
 	.get_msglevel = qede_get_msglevel,

drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c

@@ -1542,24 +1542,7 @@ static int qlcnic_set_intr_coalesce(struct net_device *netdev,
 	if (ethcoal->rx_coalesce_usecs > 0xffff ||
 	    ethcoal->rx_max_coalesced_frames > 0xffff ||
 	    ethcoal->tx_coalesce_usecs > 0xffff ||
-	    ethcoal->tx_max_coalesced_frames > 0xffff ||
-	    ethcoal->rx_coalesce_usecs_irq ||
-	    ethcoal->rx_max_coalesced_frames_irq ||
-	    ethcoal->tx_coalesce_usecs_irq ||
-	    ethcoal->tx_max_coalesced_frames_irq ||
-	    ethcoal->stats_block_coalesce_usecs ||
-	    ethcoal->use_adaptive_rx_coalesce ||
-	    ethcoal->use_adaptive_tx_coalesce ||
-	    ethcoal->pkt_rate_low ||
-	    ethcoal->rx_coalesce_usecs_low ||
-	    ethcoal->rx_max_coalesced_frames_low ||
-	    ethcoal->tx_coalesce_usecs_low ||
-	    ethcoal->tx_max_coalesced_frames_low ||
-	    ethcoal->pkt_rate_high ||
-	    ethcoal->rx_coalesce_usecs_high ||
-	    ethcoal->rx_max_coalesced_frames_high ||
-	    ethcoal->tx_coalesce_usecs_high ||
-	    ethcoal->tx_max_coalesced_frames_high)
+	    ethcoal->tx_max_coalesced_frames > 0xffff)
 		return -EINVAL;
 
 	err = qlcnic_config_intr_coalesce(adapter, ethcoal);
@@ -1834,6 +1817,8 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val)
 }
 
 const struct ethtool_ops qlcnic_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
 	.get_drvinfo = qlcnic_get_drvinfo,
 	.get_regs_len = qlcnic_get_regs_len,
 	.get_regs = qlcnic_get_regs,
@@ -1865,6 +1850,8 @@ const struct ethtool_ops qlcnic_ethtool_ops = {
 };
 
 const struct ethtool_ops qlcnic_sriov_vf_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
 	.get_drvinfo		= qlcnic_get_drvinfo,
 	.get_regs_len		= qlcnic_get_regs_len,
 	.get_regs		= qlcnic_get_regs,

drivers/net/ethernet/realtek/r8169_main.c

@@ -2006,6 +2006,8 @@ static int rtl8169_set_eee(struct net_device *dev, struct ethtool_eee *data)
 }
 
 static const struct ethtool_ops rtl8169_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
 	.get_drvinfo		= rtl8169_get_drvinfo,
 	.get_regs_len		= rtl8169_get_regs_len,
 	.get_link		= ethtool_op_get_link,

drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c

@@ -476,6 +476,7 @@ static int sxgbe_get_regs_len(struct net_device *dev)
 }
 
 static const struct ethtool_ops sxgbe_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS,
 	.get_drvinfo = sxgbe_getdrvinfo,
 	.get_msglevel = sxgbe_getmsglevel,
 	.set_msglevel = sxgbe_setmsglevel,

drivers/net/ethernet/via/via-velocity.c

@@ -3648,6 +3648,8 @@ static void velocity_get_ethtool_stats(struct net_device *dev,
 }
 
 static const struct ethtool_ops velocity_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
 	.get_drvinfo		= velocity_get_drvinfo,
 	.get_wol		= velocity_ethtool_get_wol,
 	.set_wol		= velocity_ethtool_set_wol,