Commit b835d7fb authored by Jean Delvare's avatar Jean Delvare

max6875: Discard obsolete detect method

There is no point in implementing a detect callback for the MAX6875, as
this device can't be detected. It was there solely to handle "force"
module parameters to instantiate devices, but now we have a better sysfs
interface that can do the same.

So we can get rid of the ugly module parameters and the detect callback.
This basically divides the binary module size by 2.
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Acked-by: default avatarWolfram Sang <w.sang@pengutronix.de>
Acked-by: default avatarBen Gardner <gardner.ben@gmail.com>
parent f546c65c
...@@ -42,10 +42,12 @@ General Remarks ...@@ -42,10 +42,12 @@ General Remarks
Valid addresses for the MAX6875 are 0x50 and 0x52. Valid addresses for the MAX6875 are 0x50 and 0x52.
Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56. Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
The driver does not probe any address, so you must force the address. The driver does not probe any address, so you explicitly instantiate the
devices.
Example: Example:
$ modprobe max6875 force=0,0x50 $ modprobe max6875
$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
addresses. For example, for address 0x50, it also reserves 0x51. addresses. For example, for address 0x50, it also reserves 0x51.
......
...@@ -33,12 +33,6 @@ ...@@ -33,12 +33,6 @@
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/mutex.h> #include <linux/mutex.h>
/* Do not scan - the MAX6875 access method will write to some EEPROM chips */
static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD_1(max6875);
/* The MAX6875 can only read/write 16 bytes at a time */ /* The MAX6875 can only read/write 16 bytes at a time */
#define SLICE_SIZE 16 #define SLICE_SIZE 16
#define SLICE_BITS 4 #define SLICE_BITS 4
...@@ -146,31 +140,21 @@ static struct bin_attribute user_eeprom_attr = { ...@@ -146,31 +140,21 @@ static struct bin_attribute user_eeprom_attr = {
.read = max6875_read, .read = max6875_read,
}; };
/* Return 0 if detection is successful, -ENODEV otherwise */ static int max6875_probe(struct i2c_client *client,
static int max6875_detect(struct i2c_client *client, int kind, const struct i2c_device_id *id)
struct i2c_board_info *info)
{ {
struct i2c_adapter *adapter = client->adapter; struct i2c_adapter *adapter = client->adapter;
struct max6875_data *data;
int err;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA
| I2C_FUNC_SMBUS_READ_BYTE)) | I2C_FUNC_SMBUS_READ_BYTE))
return -ENODEV; return -ENODEV;
/* Only check even addresses */ /* Only bind to even addresses */
if (client->addr & 1) if (client->addr & 1)
return -ENODEV; return -ENODEV;
strlcpy(info->type, "max6875", I2C_NAME_SIZE);
return 0;
}
static int max6875_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max6875_data *data;
int err;
if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL))) if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
return -ENOMEM; return -ENOMEM;
...@@ -222,9 +206,6 @@ static struct i2c_driver max6875_driver = { ...@@ -222,9 +206,6 @@ static struct i2c_driver max6875_driver = {
.probe = max6875_probe, .probe = max6875_probe,
.remove = max6875_remove, .remove = max6875_remove,
.id_table = max6875_id, .id_table = max6875_id,
.detect = max6875_detect,
.address_data = &addr_data,
}; };
static int __init max6875_init(void) static int __init max6875_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment