Commit b86d3d21 authored by Dan Murphy's avatar Dan Murphy Committed by Shawn Guo

ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node

Add the reg property to each channel node.  This update is
to accommodate the multicolor framework.  In addition to the
accommodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 675abeb9
...@@ -263,29 +263,35 @@ leds: led-controller@30 { ...@@ -263,29 +263,35 @@ leds: led-controller@30 {
reg = <0x30>; reg = <0x30>;
clock-mode = /bits/ 8 <1>; clock-mode = /bits/ 8 <1>;
status = "disabled"; status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
chan0 { chan@0 {
chan-name = "R"; chan-name = "R";
led-cur = /bits/ 8 <0x20>; led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>; max-cur = /bits/ 8 <0x60>;
reg = <0>;
}; };
chan1 { chan@1 {
chan-name = "G"; chan-name = "G";
led-cur = /bits/ 8 <0x20>; led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>; max-cur = /bits/ 8 <0x60>;
reg = <1>;
}; };
chan2 { chan@2 {
chan-name = "B"; chan-name = "B";
led-cur = /bits/ 8 <0x20>; led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>; max-cur = /bits/ 8 <0x60>;
reg = <2>;
}; };
chan3 { chan@3 {
chan-name = "W"; chan-name = "W";
led-cur = /bits/ 8 <0x0>; led-cur = /bits/ 8 <0x0>;
max-cur = /bits/ 8 <0x0>; max-cur = /bits/ 8 <0x0>;
reg = <3>;
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment