ACPICA: Utilities: Cleanup to remove useless ACPI_PRINTF/FORMAT_xxx helpers.

commit 1d0a0b2f upstream.

ACPICA commit b60612373a4ef63b64a57c124576d7ddb6d8efb6

For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use 0x%8.8X%8.8X instead of ACPI_PRINTF_UINT
and ACPI_FORMAT_UINT64() instead of
ACPI_FORMAT_NATIVE_UINT()/ACPI_FORMAT_TO_UINT().

This patch also removes above replaced macros as there are no users.

This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.

Link: https://github.com/acpica/acpica/commit/b6061237Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drivers/acpi/acpica/acmacros.h

@@ -63,19 +63,15 @@
 #define ACPI_SET64(ptr, val)            (*ACPI_CAST64 (ptr) = (u64) (val))
 
 /*
- * printf() format helpers
+ * printf() format helper. This macros is a workaround for the difficulties
+ * with emitting 64-bit integers and 64-bit pointers with the same code
+ * for both 32-bit and 64-bit hosts.
  */
 
 /* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */
 
 #define ACPI_FORMAT_UINT64(i)           ACPI_HIDWORD(i), ACPI_LODWORD(i)
 
-#if ACPI_MACHINE_WIDTH == 64
-#define ACPI_FORMAT_NATIVE_UINT(i)      ACPI_FORMAT_UINT64(i)
-#else
-#define ACPI_FORMAT_NATIVE_UINT(i)      0, (i)
-#endif
-
 /*
  * Macros for moving data around to/from buffers that are possibly unaligned.
  * If the hardware supports the transfer of unaligned data, just do the store.

drivers/acpi/acpica/dsopcode.c

@@ -446,7 +446,7 @@ acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state,
 
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
 			  obj_desc,
-			  ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address),
+			  ACPI_FORMAT_UINT64(obj_desc->region.address),
 			  obj_desc->region.length));
 
 	/* Now the address and length are valid for this opregion */
@@ -544,7 +544,7 @@ acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state,
 
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
 			  obj_desc,
-			  ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address),
+			  ACPI_FORMAT_UINT64(obj_desc->region.address),
 			  obj_desc->region.length));
 
 	/* Now the address and length are valid for this opregion */

drivers/acpi/acpica/evregion.c

@@ -277,7 +277,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 	ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 			  "Handler %p (@%p) Address %8.8X%8.8X [%s]\n",
 			  &region_obj->region.handler->address_space, handler,
-			  ACPI_FORMAT_NATIVE_UINT(address),
+			  ACPI_FORMAT_UINT64(address),
 			  acpi_ut_get_region_name(region_obj->region.
 						  space_id)));
 

drivers/acpi/acpica/exdump.c

@@ -622,8 +622,8 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth)
 			acpi_os_printf("\n");
 		} else {
 			acpi_os_printf(" base %8.8X%8.8X Length %X\n",
-				       ACPI_FORMAT_NATIVE_UINT(obj_desc->region.
-							       address),
+				       ACPI_FORMAT_UINT64(obj_desc->region.
+							  address),
 				       obj_desc->region.length);
 		}
 		break;

drivers/acpi/acpica/exregion.c

@@ -181,7 +181,7 @@ acpi_ex_system_memory_space_handler(u32 function,
 		if (!mem_info->mapped_logical_address) {
 			ACPI_ERROR((AE_INFO,
 				    "Could not map memory at 0x%8.8X%8.8X, size %u",
-				    ACPI_FORMAT_NATIVE_UINT(address),
+				    ACPI_FORMAT_UINT64(address),
 				    (u32) map_length));
 			mem_info->mapped_length = 0;
 			return_ACPI_STATUS(AE_NO_MEMORY);
@@ -202,8 +202,7 @@ acpi_ex_system_memory_space_handler(u32 function,
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "System-Memory (width %u) R/W %u Address=%8.8X%8.8X\n",
-			  bit_width, function,
-			  ACPI_FORMAT_NATIVE_UINT(address)));
+			  bit_width, function, ACPI_FORMAT_UINT64(address)));
 
 	/*
 	 * Perform the memory read or write
@@ -318,8 +317,7 @@ acpi_ex_system_io_space_handler(u32 function,
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "System-IO (width %u) R/W %u Address=%8.8X%8.8X\n",
-			  bit_width, function,
-			  ACPI_FORMAT_NATIVE_UINT(address)));
+			  bit_width, function, ACPI_FORMAT_UINT64(address)));
 
 	/* Decode the function parameter */
 

drivers/acpi/acpica/nsdump.c

@@ -335,8 +335,9 @@ acpi_ns_dump_one_object(acpi_handle obj_handle,
 							       space_id));
 			if (obj_desc->region.flags & AOPOBJ_DATA_VALID) {
 				acpi_os_printf(" Addr %8.8X%8.8X Len %.4X\n",
-					       ACPI_FORMAT_NATIVE_UINT
-					       (obj_desc->region.address),
+					       ACPI_FORMAT_UINT64(obj_desc->
+								  region.
+								  address),
 					       obj_desc->region.length);
 			} else {
 				acpi_os_printf

drivers/acpi/acpica/tbprint.c

@@ -127,16 +127,12 @@ acpi_tb_print_table_header(acpi_physical_address address,
 {
 	struct acpi_table_header local_header;
 
-	/*
-	 * The reason that the Address is cast to a void pointer is so that we
-	 * can use %p which will work properly on both 32-bit and 64-bit hosts.
-	 */
 	if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_FACS)) {
 
 		/* FACS only has signature and length fields */
 
-		ACPI_INFO((AE_INFO, "%4.4s %p %05X",
-			   header->signature, ACPI_CAST_PTR(void, address),
+		ACPI_INFO((AE_INFO, "%-4.4s 0x%8.8X%8.8X %05X",
+			   header->signature, ACPI_FORMAT_UINT64(address),
 			   header->length));
 	} else if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_RSDP)) {
 
@@ -147,8 +143,8 @@ acpi_tb_print_table_header(acpi_physical_address address,
 					  header)->oem_id, ACPI_OEM_ID_SIZE);
 		acpi_tb_fix_string(local_header.oem_id, ACPI_OEM_ID_SIZE);
 
-		ACPI_INFO((AE_INFO, "RSDP %p %05X (v%.2d %6.6s)",
-			   ACPI_CAST_PTR(void, address),
+		ACPI_INFO((AE_INFO, "RSDP 0x%8.8X%8.8X %05X (v%.2d %-6.6s)",
+			   ACPI_FORMAT_UINT64(address),
 			   (ACPI_CAST_PTR(struct acpi_table_rsdp, header)->
 			    revision >
 			    0) ? ACPI_CAST_PTR(struct acpi_table_rsdp,
@@ -162,8 +158,9 @@ acpi_tb_print_table_header(acpi_physical_address address,
 		acpi_tb_cleanup_table_header(&local_header, header);
 
 		ACPI_INFO((AE_INFO,
-			   "%4.4s %p %05X (v%.2d %6.6s %8.8s %08X %4.4s %08X)",
-			   local_header.signature, ACPI_CAST_PTR(void, address),
+			   "%-4.4s 0x%8.8X%8.8X"
+			   " %05X (v%.2d %-6.6s %-8.8s %08X %-4.4s %08X)",
+			   local_header.signature, ACPI_FORMAT_UINT64(address),
 			   local_header.length, local_header.revision,
 			   local_header.oem_id, local_header.oem_table_id,
 			   local_header.oem_revision,