Commit b8824c9a authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Linus Walleij

ARM: ep93xx: remove memory configuration options

The ARM_PATCH_PHYS_VIRT option makes the ep93xx memory configuration
options obsolete.

This allows support for all the ep93xx variations to be built into a
single kernel.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 8ed3912e
......@@ -268,7 +268,6 @@ config PHYS_OFFSET
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
default 0x00000000 if ARCH_EBSA110 || \
EP93XX_SDCE3_SYNC_PHYS_OFFSET || \
ARCH_FOOTBRIDGE || \
ARCH_INTEGRATOR || \
ARCH_IOP13XX || \
......@@ -277,10 +276,7 @@ config PHYS_OFFSET
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x20000000 if ARCH_S5PV210
default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100
default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET
default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET
default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET
default 0xc0000000 if ARCH_SA1100
help
Please provide the physical address corresponding to the
location of main memory in your system.
......@@ -419,7 +415,9 @@ config ARCH_EP93XX
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select AUTO_ZRELADDR
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CPU_ARM920T
......
......@@ -15,45 +15,8 @@ config CRUNCH
comment "EP93xx Platforms"
choice
prompt "EP93xx first SDRAM bank selection"
default EP93XX_SDCE3_SYNC_PHYS_OFFSET
config EP93XX_SDCE3_SYNC_PHYS_OFFSET
bool "0x00000000 - SDCE3/SyncBoot"
help
Select this option if you want support for EP93xx boards with the
first SDRAM bank at 0x00000000.
config EP93XX_SDCE0_PHYS_OFFSET
bool "0xc0000000 - SDCEO"
help
Select this option if you want support for EP93xx boards with the
first SDRAM bank at 0xc0000000.
config EP93XX_SDCE1_PHYS_OFFSET
bool "0xd0000000 - SDCE1"
help
Select this option if you want support for EP93xx boards with the
first SDRAM bank at 0xd0000000.
config EP93XX_SDCE2_PHYS_OFFSET
bool "0xe0000000 - SDCE2"
help
Select this option if you want support for EP93xx boards with the
first SDRAM bank at 0xe0000000.
config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
bool "0xf0000000 - SDCE3/AsyncBoot"
help
Select this option if you want support for EP93xx boards with the
first SDRAM bank at 0xf0000000.
endchoice
config MACH_ADSSPHERE
bool "Support ADS Sphere"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the ADS
Sphere board.
......@@ -63,7 +26,6 @@ config MACH_EDB93XX
config MACH_EDB9301
bool "Support Cirrus Logic EDB9301"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
......@@ -71,7 +33,6 @@ config MACH_EDB9301
config MACH_EDB9302
bool "Support Cirrus Logic EDB9302"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
......@@ -79,7 +40,6 @@ config MACH_EDB9302
config MACH_EDB9302A
bool "Support Cirrus Logic EDB9302A"
depends on EP93XX_SDCE0_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
......@@ -87,7 +47,6 @@ config MACH_EDB9302A
config MACH_EDB9307
bool "Support Cirrus Logic EDB9307"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
......@@ -95,7 +54,6 @@ config MACH_EDB9307
config MACH_EDB9307A
bool "Support Cirrus Logic EDB9307A"
depends on EP93XX_SDCE0_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
......@@ -103,7 +61,6 @@ config MACH_EDB9307A
config MACH_EDB9312
bool "Support Cirrus Logic EDB9312"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
......@@ -111,7 +68,6 @@ config MACH_EDB9312
config MACH_EDB9315
bool "Support Cirrus Logic EDB9315"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
......@@ -119,14 +75,12 @@ config MACH_EDB9315
config MACH_EDB9315A
bool "Support Cirrus Logic EDB9315A"
depends on EP93XX_SDCE0_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315A Evaluation Board.
config MACH_GESBC9312
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
bool "Support Glomation GESBC-9312-sx"
help
Say 'Y' here if you want your kernel to support the Glomation
......@@ -137,7 +91,6 @@ config MACH_MICRO9
config MACH_MICRO9H
bool "Support Contec Micro9-High"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
......@@ -145,7 +98,6 @@ config MACH_MICRO9H
config MACH_MICRO9M
bool "Support Contec Micro9-Mid"
depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
......@@ -153,7 +105,6 @@ config MACH_MICRO9M
config MACH_MICRO9L
bool "Support Contec Micro9-Lite"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
......@@ -161,7 +112,6 @@ config MACH_MICRO9L
config MACH_MICRO9S
bool "Support Contec Micro9-Slim"
depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
......@@ -169,28 +119,24 @@ config MACH_MICRO9S
config MACH_SIM_ONE
bool "Support Simplemachines Sim.One board"
depends on EP93XX_SDCE0_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the
Simplemachines Sim.One board.
config MACH_SNAPPER_CL15
bool "Support Bluewater Systems Snapper CL15 Module"
depends on EP93XX_SDCE0_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the Bluewater
Systems Snapper CL15 Module.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
config MACH_VISION_EP9307
bool "Support Vision Engraving Systems EP9307 SoM"
depends on EP93XX_SDCE0_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the
Vision Engraving Systems EP9307 SoM.
......
zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) += 0x00008000
params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100
zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) += 0xc0008000
params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100
zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) += 0xd0008000
params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100
zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) += 0xe0008000
params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100
zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) += 0xf0008000
params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100
# Empty file waiting for deletion once Makefile.boot isn't needed any more.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment