sh: mach-se evt2irq migration.

Migrate Solution Engine boards to evt2irq backed hwirq lookups.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/boards/mach-se/7722/setup.c

@@ -16,6 +16,7 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/smc91x.h>
+#include <linux/sh_intc.h>
 #include <mach-se/mach/se7722.h>
 #include <mach-se/mach/mrshpc.h>
 #include <asm/machvec.h>
@@ -114,7 +115,7 @@ static struct resource sh_keysc_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 79,
+		.start  = evt2irq(0xbe0),
 		.flags  = IORESOURCE_IRQ,
 	},
 };

arch/sh/boards/mach-se/7724/setup.c

@@ -24,6 +24,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
 #include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
@@ -197,7 +198,7 @@ static struct resource lcdc_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 106,
+		.start	= evt2irq(0xf40),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -224,7 +225,7 @@ static struct resource ceu0_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 52,
+		.start  = evt2irq(0x880),
 		.flags  = IORESOURCE_IRQ,
 	},
 	[2] = {
@@ -255,7 +256,7 @@ static struct resource ceu1_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 63,
+		.start  = evt2irq(0x9e0),
 		.flags  = IORESOURCE_IRQ,
 	},
 	[2] = {
@@ -289,7 +290,7 @@ static struct resource fsi_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 108,
+		.start  = evt2irq(0xf80),
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -343,7 +344,7 @@ static struct resource keysc_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 79,
+		.start  = evt2irq(0xbe0),
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -366,7 +367,7 @@ static struct resource sh_eth_resources[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = 91,
+		.start = evt2irq(0xd60),
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
@@ -397,8 +398,8 @@ static struct resource sh7724_usb0_host_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 65,
-		.end	= 65,
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
@@ -426,8 +427,8 @@ static struct resource sh7724_usb1_gadget_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 66,
-		.end	= 66,
+		.start	= evt2irq(0xa40),
+		.end	= evt2irq(0xa40),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 	},
 };
@@ -452,7 +453,7 @@ static struct resource sdhi0_cn7_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 100,
+		.start  = evt2irq(0xe80),
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -481,7 +482,7 @@ static struct resource sdhi1_cn8_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 23,
+		.start  = evt2irq(0x4e0),
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -511,7 +512,7 @@ static struct resource irda_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 20,
+		.start  = evt2irq(0x480),
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -549,7 +550,7 @@ static struct resource sh_vou_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 55,
+		.start  = evt2irq(0x8e0),
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -595,6 +596,7 @@ static struct i2c_board_info i2c0_devices[] = {
 #define EEPROM_DATA 0xBA20600C
 #define EEPROM_STAT 0xBA206010
 #define EEPROM_STRT 0xBA206014
+
 static int __init sh_eth_is_eeprom_ready(void)
 {
 	int t = 10000;
@@ -651,7 +653,6 @@ extern char ms7724se_sdram_enter_end;
 extern char ms7724se_sdram_leave_start;
 extern char ms7724se_sdram_leave_end;
 
-
 static int __init arch_setup(void)
 {
 	/* enable I2C device */

arch/sh/include/mach-se/mach/se.h

@@ -8,6 +8,7 @@
  *
  * Hitachi SolutionEngine support
  */
+#include <linux/sh_intc.h>
 
 /* Box specific addresses.  */
 
@@ -82,16 +83,16 @@
 #define INTC_IPRD       0xa4000018UL
 #define INTC_IPRE       0xa400001aUL
 
-#define IRQ0_IRQ        32
-#define IRQ1_IRQ        33
+#define IRQ0_IRQ        evt2irq(0x600)
+#define IRQ1_IRQ        evt2irq(0x620)
 #endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define IRQ_STNIC	12
-#define IRQ_CFCARD	14
+#define IRQ_STNIC	evt2irq(0x380)
+#define IRQ_CFCARD	evt2irq(0x3c0)
 #else
-#define IRQ_STNIC	10
-#define IRQ_CFCARD	7
+#define IRQ_STNIC	evt2irq(0x340)
+#define IRQ_CFCARD	evt2irq(0x2e0)
 #endif
 
 /* SH Ether support (SH7710/SH7712) */
@@ -105,9 +106,9 @@
 # define PHY_ID 0x01
 #endif
 /* Ether IRQ */
-#define SH_ETH0_IRQ	80
-#define SH_ETH1_IRQ	81
-#define SH_TSU_IRQ	82
+#define SH_ETH0_IRQ	evt2irq(0xc00)
+#define SH_ETH1_IRQ	evt2irq(0xc20)
+#define SH_TSU_IRQ	evt2irq(0xc40)
 
 void init_se_IRQ(void);
 

arch/sh/include/mach-se/mach/se7343.h

@@ -8,6 +8,7 @@
  *
  * SH-Mobile SolutionEngine 7343 support
  */
+#include <linux/sh_intc.h>
 
 /* Box specific addresses.  */
 
@@ -118,10 +119,10 @@
 #define FPGA_IN		0xb1400000
 #define FPGA_OUT	0xb1400002
 
-#define IRQ0_IRQ        32
-#define IRQ1_IRQ        33
-#define IRQ4_IRQ        36
-#define IRQ5_IRQ        37
+#define IRQ0_IRQ        evt2irq(0x600)
+#define IRQ1_IRQ        evt2irq(0x620)
+#define IRQ4_IRQ        evt2irq(0x680)
+#define IRQ5_IRQ        evt2irq(0x6a0)
 
 #define SE7343_FPGA_IRQ_MRSHPC0	0
 #define SE7343_FPGA_IRQ_MRSHPC1	1

arch/sh/include/mach-se/mach/se7721.h

@@ -11,6 +11,8 @@
 
 #ifndef __ASM_SH_SE7721_H
 #define __ASM_SH_SE7721_H
+
+#include <linux/sh_intc.h>
 #include <asm/addrspace.h>
 
 /* Box specific addresses. */
@@ -49,9 +51,9 @@
 #define MRSHPC_PCIC_INFO	(PA_MRSHPC + 30)
 
 #define PA_LED		0xB6800000	/* 8bit LED */
-#define PA_FPGA		0xB7000000 	/* FPGA base address */
+#define PA_FPGA		0xB7000000	/* FPGA base address */
 
-#define MRSHPC_IRQ0	10
+#define MRSHPC_IRQ0	evt2irq(0x340)
 
 #define FPGA_ILSR1	(PA_FPGA + 0x02)
 #define FPGA_ILSR2	(PA_FPGA + 0x03)

arch/sh/include/mach-se/mach/se7722.h

@@ -13,6 +13,7 @@
  * for more details.
  *
  */
+#include <linux/sh_intc.h>
 #include <asm/addrspace.h>
 
 /* Box specific addresses.  */
@@ -31,7 +32,7 @@
 
 #define PA_PERIPHERAL	0xB0000000
 
-#define PA_PCIC         PA_PERIPHERAL   		/* MR-SHPC-01 PCMCIA */
+#define PA_PCIC         PA_PERIPHERAL		/* MR-SHPC-01 PCMCIA */
 #define PA_MRSHPC       (PA_PERIPHERAL + 0x003fffe0)    /* MR-SHPC-01 PCMCIA controller */
 #define PA_MRSHPC_MW1   (PA_PERIPHERAL + 0x00400000)    /* MR-SHPC-01 memory window base */
 #define PA_MRSHPC_MW2   (PA_PERIPHERAL + 0x00500000)    /* MR-SHPC-01 attribute window base */
@@ -51,7 +52,7 @@
 #define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
 
 #define PA_LED		(PA_PERIPHERAL + 0x00800000)	/* 8bit LED */
-#define PA_FPGA		(PA_PERIPHERAL + 0x01800000) 	/* FPGA base address */
+#define PA_FPGA		(PA_PERIPHERAL + 0x01800000)	/* FPGA base address */
 
 #define PA_LAN		(PA_AREA6_IO + 0)		/* SMC LAN91C111 */
 /* GPIO */
@@ -77,8 +78,8 @@
 #define PORT_HIZCRC     0xA405015CUL
 
 /* IRQ */
-#define IRQ0_IRQ        32
-#define IRQ1_IRQ        33
+#define IRQ0_IRQ        evt2irq(0x600)
+#define IRQ1_IRQ        evt2irq(0x620)
 
 #define IRQ01_MODE      0xb1800000
 #define IRQ01_STS       0xb1800004

arch/sh/include/mach-se/mach/se7724.h

@@ -18,6 +18,7 @@
  * for more details.
  *
  */
+#include <linux/sh_intc.h>
 #include <asm/addrspace.h>
 
 /* SH Eth */
@@ -35,9 +36,9 @@
 #define IRQ2_MR		(0xba200028)
 
 /* IRQ */
-#define IRQ0_IRQ        32
-#define IRQ1_IRQ        33
-#define IRQ2_IRQ        34
+#define IRQ0_IRQ        evt2irq(0x600)
+#define IRQ1_IRQ        evt2irq(0x620)
+#define IRQ2_IRQ        evt2irq(0x640)
 
 /* Bits in IRQ012 registers */
 #define SE7724_FPGA_IRQ_BASE	220

arch/sh/include/mach-se/mach/se7751.h

@@ -11,6 +11,7 @@
  * Modified for 7751 Solution Engine by
  * Ian da Silva and Jeremy Siegel, 2001.
  */
+#include <linux/sh_intc.h>
 
 /* Box specific addresses.  */
 
@@ -63,7 +64,7 @@
 #define BCR_ILCRF	(PA_BCR + 10)
 #define BCR_ILCRG	(PA_BCR + 12)
 
-#define IRQ_79C973	13
+#define IRQ_79C973	evt2irq(0x3a0)
 
 void init_7751se_IRQ(void);
 

arch/sh/include/mach-se/mach/se7780.h

@@ -12,6 +12,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#include <linux/sh_intc.h>
 #include <asm/addrspace.h>
 
 /* Box specific addresses.  */
@@ -80,13 +81,13 @@
 #define IRQPOS_PCCPW            (0 * 4)
 
 /* IDE interrupt */
-#define IRQ_IDE0                67 /* iVDR */
+#define IRQ_IDE0                evt2irq(0xa60) /* iVDR */
 
 /* SMC interrupt */
-#define SMC_IRQ                 8
+#define SMC_IRQ                 evt2irq(0x300)
 
 /* SM501 interrupt */
-#define SM501_IRQ               0
+#define SM501_IRQ               evt2irq(0x200)
 
 /* interrupt pin */
 #define IRQPIN_EXTINT1          0 /* IRQ0 pin */