Commit b89f311d authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'riscv-for-linus-5.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

 - Support for time namespaces in the VDSO, along with some associated
   cleanups.

 - Support for building rv32 randconfigs.

 - Improvements to the XIP port that allow larger kernels to function

 - Various device tree cleanups for both the SiFive and Microchip boards

 - A handful of defconfig updates, including enabling Nouveau.

There are also various small cleanups.

* tag 'riscv-for-linus-5.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: defconfig: enable DRM_NOUVEAU
  riscv/vdso: Drop unneeded part due to merge issue
  riscv: remove .text section size limitation for XIP
  riscv: dts: sifive: add missing compatible for plic
  riscv: dts: microchip: add missing compatibles for clint and plic
  riscv: dts: sifive: drop duplicated nodes and properties in sifive
  riscv: dts: sifive: fix Unleashed board compatible
  riscv: dts: sifive: use only generic JEDEC SPI NOR flash compatible
  riscv: dts: microchip: use vendor compatible for Cadence SD4HC
  riscv: dts: microchip: drop unused pinctrl-names
  riscv: dts: microchip: drop duplicated MMC/SDHC node
  riscv: dts: microchip: fix board compatible
  riscv: dts: microchip: drop duplicated nodes
  dt-bindings: mmc: cdns: document Microchip MPFS MMC/SDHCI controller
  riscv: add rv32 and rv64 randconfig build targets
  riscv: mm: don't advertise 1 num_asid for 0 asid bits
  riscv: set default pm_power_off to NULL
  riscv/vdso: Add support for time namespaces
parents 4218a96f ffa7a914
......@@ -62,6 +62,7 @@ config RISCV
select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
select GENERIC_TIME_VSYSCALL if MMU && 64BIT
select GENERIC_VDSO_TIME_NS if HAVE_GENERIC_VDSO
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_JUMP_LABEL_RELATIVE if !XIP_KERNEL
......
......@@ -136,3 +136,13 @@ zinstall: install-image = Image.gz
install zinstall:
$(CONFIG_SHELL) $(srctree)/$(boot)/install.sh $(KERNELRELEASE) \
$(boot)/$(install-image) System.map "$(INSTALL_PATH)"
PHONY += rv32_randconfig
rv32_randconfig:
$(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctree)/arch/riscv/configs/32-bit.config \
-f $(srctree)/Makefile randconfig
PHONY += rv64_randconfig
rv64_randconfig:
$(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctree)/arch/riscv/configs/64-bit.config \
-f $(srctree)/Makefile randconfig
......@@ -9,10 +9,8 @@
#define RTCCLK_FREQ 1000000
/ {
#address-cells = <2>;
#size-cells = <2>;
model = "Microchip PolarFire-SoC Icicle Kit";
compatible = "microchip,mpfs-icicle-kit";
compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs";
aliases {
ethernet0 = &emac1;
......@@ -35,9 +33,6 @@ memory@80000000 {
reg = <0x0 0x80000000 0x0 0x40000000>;
clocks = <&clkcfg 26>;
};
soc {
};
};
&serial0 {
......@@ -56,8 +51,17 @@ &serial3 {
status = "okay";
};
&sdcard {
&mmc {
status = "okay";
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
card-detect-delay = <200>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
};
&emac0 {
......
......@@ -6,8 +6,8 @@
/ {
#address-cells = <2>;
#size-cells = <2>;
model = "Microchip MPFS Icicle Kit";
compatible = "microchip,mpfs-icicle-kit";
model = "Microchip PolarFire SoC";
compatible = "microchip,mpfs";
chosen {
};
......@@ -161,7 +161,7 @@ cache-controller@2010000 {
};
clint@2000000 {
compatible = "sifive,clint0";
compatible = "sifive,fu540-c000-clint", "sifive,clint0";
reg = <0x0 0x2000000 0x0 0xC000>;
interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
&cpu1_intc 3 &cpu1_intc 7
......@@ -172,7 +172,7 @@ &cpu3_intc 3 &cpu3_intc 7
plic: interrupt-controller@c000000 {
#interrupt-cells = <1>;
compatible = "sifive,plic-1.0.0";
compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
reg = <0x0 0xc000000 0x0 0x4000000>;
riscv,ndev = <186>;
interrupt-controller;
......@@ -262,39 +262,13 @@ serial3: serial@20104000 {
status = "disabled";
};
emmc: mmc@20008000 {
compatible = "cdns,sd4hc";
/* Common node entry for emmc/sd */
mmc: mmc@20008000 {
compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc";
reg = <0x0 0x20008000 0x0 0x1000>;
interrupt-parent = <&plic>;
interrupts = <88 89>;
pinctrl-names = "default";
clocks = <&clkcfg 6>;
bus-width = <4>;
cap-mmc-highspeed;
mmc-ddr-3_3v;
max-frequency = <200000000>;
non-removable;
no-sd;
no-sdio;
voltage-ranges = <3300 3300>;
status = "disabled";
};
sdcard: sdhc@20008000 {
compatible = "cdns,sd4hc";
reg = <0x0 0x20008000 0x0 0x1000>;
interrupt-parent = <&plic>;
interrupts = <88>;
pinctrl-names = "default";
clocks = <&clkcfg 6>;
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
card-detect-delay = <200>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
max-frequency = <200000000>;
status = "disabled";
};
......
......@@ -141,7 +141,7 @@ soc {
ranges;
plic0: interrupt-controller@c000000 {
#interrupt-cells = <1>;
compatible = "sifive,plic-1.0.0";
compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
reg = <0x0 0xc000000 0x0 0x4000000>;
riscv,ndev = <53>;
interrupt-controller;
......
......@@ -8,10 +8,9 @@
#define RTCCLK_FREQ 1000000
/ {
#address-cells = <2>;
#size-cells = <2>;
model = "SiFive HiFive Unleashed A00";
compatible = "sifive,hifive-unleashed-a00", "sifive,fu540-c000";
compatible = "sifive,hifive-unleashed-a00", "sifive,fu540-c000",
"sifive,fu540";
chosen {
stdout-path = "serial0";
......@@ -26,9 +25,6 @@ memory@80000000 {
reg = <0x0 0x80000000 0x2 0x00000000>;
};
soc {
};
hfclk: hfclk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -63,7 +59,7 @@ &i2c0 {
&qspi0 {
status = "okay";
flash@0 {
compatible = "issi,is25wp256", "jedec,spi-nor";
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
......
......@@ -8,8 +8,6 @@
#define RTCCLK_FREQ 1000000
/ {
#address-cells = <2>;
#size-cells = <2>;
model = "SiFive HiFive Unmatched A00";
compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000",
"sifive,fu740";
......@@ -27,9 +25,6 @@ memory@80000000 {
reg = <0x0 0x80000000 0x4 0x00000000>;
};
soc {
};
hfclk: hfclk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -211,7 +206,7 @@ vdd_ldo11: ldo11 {
&qspi0 {
status = "okay";
flash@0 {
compatible = "issi,is25wp256", "jedec,spi-nor";
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
......
CONFIG_ARCH_RV32I=y
CONFIG_32BIT=y
CONFIG_ARCH_RV64I=y
CONFIG_64BIT=y
......@@ -72,9 +72,10 @@ CONFIG_GPIOLIB=y
CONFIG_GPIO_SIFIVE=y
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_POWER_RESET=y
CONFIG_DRM=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
......
......@@ -157,6 +157,8 @@ extern phys_addr_t __phys_addr_symbol(unsigned long x);
#define page_to_bus(page) (page_to_phys(page))
#define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr)))
#define sym_to_pfn(x) __phys_to_pfn(__pa_symbol(x))
#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) \
(((pfn) >= ARCH_PFN_OFFSET) && (((pfn) - ARCH_PFN_OFFSET) < max_mapnr))
......
......@@ -75,7 +75,8 @@
#endif
#ifdef CONFIG_XIP_KERNEL
#define XIP_OFFSET SZ_8M
#define XIP_OFFSET SZ_32M
#define XIP_OFFSET_MASK (SZ_32M - 1)
#else
#define XIP_OFFSET 0
#endif
......@@ -97,7 +98,8 @@
#ifdef CONFIG_XIP_KERNEL
#define XIP_FIXUP(addr) ({ \
uintptr_t __a = (uintptr_t)(addr); \
(__a >= CONFIG_XIP_PHYS_ADDR && __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
(__a >= CONFIG_XIP_PHYS_ADDR && \
__a < CONFIG_XIP_PHYS_ADDR + XIP_OFFSET * 2) ? \
__a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE - XIP_OFFSET :\
__a; \
})
......
......@@ -8,30 +8,19 @@
#ifndef _ASM_RISCV_VDSO_H
#define _ASM_RISCV_VDSO_H
/*
* All systems with an MMU have a VDSO, but systems without an MMU don't
* support shared libraries and therefor don't have one.
*/
#ifdef CONFIG_MMU
#include <linux/types.h>
/*
* All systems with an MMU have a VDSO, but systems without an MMU don't
* support shared libraries and therefor don't have one.
*/
#ifdef CONFIG_MMU
#define __VVAR_PAGES 1
#define __VVAR_PAGES 2
#ifndef __ASSEMBLY__
#include <generated/vdso-offsets.h>
#define VDSO_SYMBOL(base, name) \
(void __user *)((unsigned long)(base) + __vdso_##name##_offset)
#endif /* CONFIG_MMU */
#endif /* !__ASSEMBLY__ */
#endif /* CONFIG_MMU */
......
......@@ -76,6 +76,13 @@ static __always_inline const struct vdso_data *__arch_get_vdso_data(void)
return _vdso_data;
}
#ifdef CONFIG_TIME_NS
static __always_inline
const struct vdso_data *__arch_get_timens_vdso_data(const struct vdso_data *vd)
{
return _timens_data;
}
#endif
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_VDSO_GETTIMEOFDAY_H */
......@@ -20,10 +20,20 @@
REG_L t0, _xip_fixup
add \reg, \reg, t0
.endm
.macro XIP_FIXUP_FLASH_OFFSET reg
la t1, __data_loc
li t0, XIP_OFFSET_MASK
and t1, t1, t0
li t1, XIP_OFFSET
sub t0, t0, t1
sub \reg, \reg, t0
.endm
_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
#else
.macro XIP_FIXUP_OFFSET reg
.endm
.macro XIP_FIXUP_FLASH_OFFSET reg
.endm
#endif /* CONFIG_XIP_KERNEL */
__HEAD
......@@ -267,6 +277,7 @@ pmp_done:
la a3, hart_lottery
mv a2, a3
XIP_FIXUP_OFFSET a2
XIP_FIXUP_FLASH_OFFSET a3
lw t1, (a3)
amoswap.w t0, t1, (a2)
/* first time here if hart_lottery in RAM is not set */
......@@ -305,6 +316,7 @@ clear_bss_done:
XIP_FIXUP_OFFSET sp
#ifdef CONFIG_BUILTIN_DTB
la a0, __dtb_start
XIP_FIXUP_OFFSET a0
#else
mv a0, s1
#endif /* CONFIG_BUILTIN_DTB */
......
......@@ -12,7 +12,7 @@ static void default_power_off(void)
wait_for_interrupt();
}
void (*pm_power_off)(void) = default_power_off;
void (*pm_power_off)(void) = NULL;
EXPORT_SYMBOL(pm_power_off);
void machine_restart(char *cmd)
......@@ -23,10 +23,16 @@ void machine_restart(char *cmd)
void machine_halt(void)
{
pm_power_off();
if (pm_power_off != NULL)
pm_power_off();
else
default_power_off();
}
void machine_power_off(void)
{
pm_power_off();
if (pm_power_off != NULL)
pm_power_off();
else
default_power_off();
}
......@@ -13,6 +13,7 @@
#include <linux/err.h>
#include <asm/page.h>
#include <asm/vdso.h>
#include <linux/time_namespace.h>
#ifdef CONFIG_GENERIC_TIME_VSYSCALL
#include <vdso/datapage.h>
......@@ -25,14 +26,12 @@ extern char vdso_start[], vdso_end[];
enum vvar_pages {
VVAR_DATA_PAGE_OFFSET,
VVAR_TIMENS_PAGE_OFFSET,
VVAR_NR_PAGES,
};
#define VVAR_SIZE (VVAR_NR_PAGES << PAGE_SHIFT)
static unsigned int vdso_pages __ro_after_init;
static struct page **vdso_pagelist __ro_after_init;
/*
* The vDSO data page.
*/
......@@ -42,83 +41,228 @@ static union {
} vdso_data_store __page_aligned_data;
struct vdso_data *vdso_data = &vdso_data_store.data;
static int __init vdso_init(void)
struct __vdso_info {
const char *name;
const char *vdso_code_start;
const char *vdso_code_end;
unsigned long vdso_pages;
/* Data Mapping */
struct vm_special_mapping *dm;
/* Code Mapping */
struct vm_special_mapping *cm;
};
static struct __vdso_info vdso_info __ro_after_init = {
.name = "vdso",
.vdso_code_start = vdso_start,
.vdso_code_end = vdso_end,
};
static int vdso_mremap(const struct vm_special_mapping *sm,
struct vm_area_struct *new_vma)
{
current->mm->context.vdso = (void *)new_vma->vm_start;
return 0;
}
static int __init __vdso_init(void)
{
unsigned int i;
struct page **vdso_pagelist;
unsigned long pfn;
vdso_pages = (vdso_end - vdso_start) >> PAGE_SHIFT;
vdso_pagelist =
kcalloc(vdso_pages + VVAR_NR_PAGES, sizeof(struct page *), GFP_KERNEL);
if (unlikely(vdso_pagelist == NULL)) {
pr_err("vdso: pagelist allocation failed\n");
return -ENOMEM;
if (memcmp(vdso_info.vdso_code_start, "\177ELF", 4)) {
pr_err("vDSO is not a valid ELF object!\n");
return -EINVAL;
}
for (i = 0; i < vdso_pages; i++) {
struct page *pg;
vdso_info.vdso_pages = (
vdso_info.vdso_code_end -
vdso_info.vdso_code_start) >>
PAGE_SHIFT;
vdso_pagelist = kcalloc(vdso_info.vdso_pages,
sizeof(struct page *),
GFP_KERNEL);
if (vdso_pagelist == NULL)
return -ENOMEM;
/* Grab the vDSO code pages. */
pfn = sym_to_pfn(vdso_info.vdso_code_start);
for (i = 0; i < vdso_info.vdso_pages; i++)
vdso_pagelist[i] = pfn_to_page(pfn + i);
vdso_info.cm->pages = vdso_pagelist;
return 0;
}
#ifdef CONFIG_TIME_NS
struct vdso_data *arch_get_vdso_data(void *vvar_page)
{
return (struct vdso_data *)(vvar_page);
}
/*
* The vvar mapping contains data for a specific time namespace, so when a task
* changes namespace we must unmap its vvar data for the old namespace.
* Subsequent faults will map in data for the new namespace.
*
* For more details see timens_setup_vdso_data().
*/
int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
{
struct mm_struct *mm = task->mm;
struct vm_area_struct *vma;
mmap_read_lock(mm);
pg = virt_to_page(vdso_start + (i << PAGE_SHIFT));
vdso_pagelist[i] = pg;
for (vma = mm->mmap; vma; vma = vma->vm_next) {
unsigned long size = vma->vm_end - vma->vm_start;
if (vma_is_special_mapping(vma, vdso_info.dm))
zap_page_range(vma, vma->vm_start, size);
}
vdso_pagelist[i] = virt_to_page(vdso_data);
mmap_read_unlock(mm);
return 0;
}
static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
if (likely(vma->vm_mm == current->mm))
return current->nsproxy->time_ns->vvar_page;
/*
* VM_PFNMAP | VM_IO protect .fault() handler from being called
* through interfaces like /proc/$pid/mem or
* process_vm_{readv,writev}() as long as there's no .access()
* in special_mapping_vmops.
* For more details check_vma_flags() and __access_remote_vm()
*/
WARN(1, "vvar_page accessed remotely");
return NULL;
}
#else
static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
{
return NULL;
}
#endif
static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
struct vm_area_struct *vma, struct vm_fault *vmf)
{
struct page *timens_page = find_timens_vvar_page(vma);
unsigned long pfn;
switch (vmf->pgoff) {
case VVAR_DATA_PAGE_OFFSET:
if (timens_page)
pfn = page_to_pfn(timens_page);
else
pfn = sym_to_pfn(vdso_data);
break;
#ifdef CONFIG_TIME_NS
case VVAR_TIMENS_PAGE_OFFSET:
/*
* If a task belongs to a time namespace then a namespace
* specific VVAR is mapped with the VVAR_DATA_PAGE_OFFSET and
* the real VVAR page is mapped with the VVAR_TIMENS_PAGE_OFFSET
* offset.
* See also the comment near timens_setup_vdso_data().
*/
if (!timens_page)
return VM_FAULT_SIGBUS;
pfn = sym_to_pfn(vdso_data);
break;
#endif /* CONFIG_TIME_NS */
default:
return VM_FAULT_SIGBUS;
}
return vmf_insert_pfn(vma, vmf->address, pfn);
}
enum rv_vdso_map {
RV_VDSO_MAP_VVAR,
RV_VDSO_MAP_VDSO,
};
static struct vm_special_mapping rv_vdso_maps[] __ro_after_init = {
[RV_VDSO_MAP_VVAR] = {
.name = "[vvar]",
.fault = vvar_fault,
},
[RV_VDSO_MAP_VDSO] = {
.name = "[vdso]",
.mremap = vdso_mremap,
},
};
static int __init vdso_init(void)
{
vdso_info.dm = &rv_vdso_maps[RV_VDSO_MAP_VVAR];
vdso_info.cm = &rv_vdso_maps[RV_VDSO_MAP_VDSO];
return __vdso_init();
}
arch_initcall(vdso_init);
int arch_setup_additional_pages(struct linux_binprm *bprm,
int uses_interp)
static int __setup_additional_pages(struct mm_struct *mm,
struct linux_binprm *bprm,
int uses_interp)
{
struct mm_struct *mm = current->mm;
unsigned long vdso_base, vdso_len;
int ret;
unsigned long vdso_base, vdso_text_len, vdso_mapping_len;
void *ret;
BUILD_BUG_ON(VVAR_NR_PAGES != __VVAR_PAGES);
vdso_len = (vdso_pages + VVAR_NR_PAGES) << PAGE_SHIFT;
vdso_text_len = vdso_info.vdso_pages << PAGE_SHIFT;
/* Be sure to map the data page */
vdso_mapping_len = vdso_text_len + VVAR_SIZE;
if (mmap_write_lock_killable(mm))
return -EINTR;
vdso_base = get_unmapped_area(NULL, 0, vdso_len, 0, 0);
vdso_base = get_unmapped_area(NULL, 0, vdso_mapping_len, 0, 0);
if (IS_ERR_VALUE(vdso_base)) {
ret = vdso_base;
goto end;
ret = ERR_PTR(vdso_base);
goto up_fail;
}
mm->context.vdso = NULL;
ret = install_special_mapping(mm, vdso_base, VVAR_SIZE,
(VM_READ | VM_MAYREAD), &vdso_pagelist[vdso_pages]);
if (unlikely(ret))
goto end;
ret = _install_special_mapping(mm, vdso_base, VVAR_SIZE,
(VM_READ | VM_MAYREAD | VM_PFNMAP), vdso_info.dm);
if (IS_ERR(ret))
goto up_fail;
vdso_base += VVAR_SIZE;
mm->context.vdso = (void *)vdso_base;
ret =
install_special_mapping(mm, vdso_base + VVAR_SIZE,
vdso_pages << PAGE_SHIFT,
_install_special_mapping(mm, vdso_base, vdso_text_len,
(VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC),
vdso_pagelist);
vdso_info.cm);
if (unlikely(ret))
goto end;
if (IS_ERR(ret))
goto up_fail;
/*
* Put vDSO base into mm struct. We need to do this before calling
* install_special_mapping or the perf counter mmap tracking code
* will fail to recognise it as a vDSO (since arch_vma_name fails).
*/
mm->context.vdso = (void *)vdso_base + VVAR_SIZE;
return 0;
end:
mmap_write_unlock(mm);
return ret;
up_fail:
mm->context.vdso = NULL;
return PTR_ERR(ret);
}
const char *arch_vma_name(struct vm_area_struct *vma)
int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
{
if (vma->vm_mm && (vma->vm_start == (long)vma->vm_mm->context.vdso))
return "[vdso]";
if (vma->vm_mm && (vma->vm_start ==
(long)vma->vm_mm->context.vdso - VVAR_SIZE))
return "[vdso_data]";
return NULL;
struct mm_struct *mm = current->mm;
int ret;
if (mmap_write_lock_killable(mm))
return -EINTR;
ret = __setup_additional_pages(mm, bprm, uses_interp);
mmap_write_unlock(mm);
return ret;
}
......@@ -10,6 +10,9 @@ OUTPUT_ARCH(riscv)
SECTIONS
{
PROVIDE(_vdso_data = . - __VVAR_PAGES * PAGE_SIZE);
#ifdef CONFIG_TIME_NS
PROVIDE(_timens_data = _vdso_data + PAGE_SIZE);
#endif
. = SIZEOF_HEADERS;
.hash : { *(.hash) } :text
......
......@@ -64,8 +64,11 @@ SECTIONS
/*
* From this point, stuff is considered writable and will be copied to RAM
*/
__data_loc = ALIGN(16); /* location in file */
. = LOAD_OFFSET + XIP_OFFSET; /* location in memory */
__data_loc = ALIGN(PAGE_SIZE); /* location in file */
. = KERNEL_LINK_ADDR + XIP_OFFSET; /* location in memory */
#undef LOAD_OFFSET
#define LOAD_OFFSET (KERNEL_LINK_ADDR + XIP_OFFSET - (__data_loc & XIP_OFFSET_MASK))
_sdata = .; /* Start of data section */
_data = .;
......@@ -96,7 +99,6 @@ SECTIONS
KEEP(*(__soc_builtin_dtb_table))
__soc_builtin_dtb_table_end = .;
}
PERCPU_SECTION(L1_CACHE_BYTES)
. = ALIGN(8);
.alternative : {
......@@ -122,6 +124,8 @@ SECTIONS
BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
PERCPU_SECTION(L1_CACHE_BYTES)
.rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
*(.rel.dyn*)
}
......
......@@ -233,8 +233,10 @@ static int __init asids_init(void)
local_flush_tlb_all();
/* Pre-compute ASID details */
num_asids = 1 << asid_bits;
asid_mask = num_asids - 1;
if (asid_bits) {
num_asids = 1 << asid_bits;
asid_mask = num_asids - 1;
}
/*
* Use ASID allocator only if number of HW ASIDs are
......@@ -255,7 +257,7 @@ static int __init asids_init(void)
pr_info("ASID allocator using %lu bits (%lu entries)\n",
asid_bits, num_asids);
} else {
pr_info("ASID allocator disabled\n");
pr_info("ASID allocator disabled (%lu bits)\n", asid_bits);
}
return 0;
......
......@@ -41,7 +41,7 @@ phys_addr_t phys_ram_base __ro_after_init;
EXPORT_SYMBOL(phys_ram_base);
#ifdef CONFIG_XIP_KERNEL
extern char _xiprom[], _exiprom[];
extern char _xiprom[], _exiprom[], __data_loc;
#endif
unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]
......@@ -454,10 +454,9 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
/* called from head.S with MMU off */
asmlinkage void __init __copy_data(void)
{
void *from = (void *)(&_sdata);
void *end = (void *)(&_end);
void *from = (void *)(&__data_loc);
void *to = (void *)CONFIG_PHYS_RAM_BASE;
size_t sz = (size_t)(end - from + 1);
size_t sz = (size_t)((uintptr_t)(&_end) - (uintptr_t)(&_sdata));
memcpy(to, from, sz);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment