Commit b8a19382 authored by Charles Keepax's avatar Charles Keepax Committed by Linus Walleij

pinctrl: bcm2835: Fix support for threaded level triggered IRQs

Currently, the driver uses handle_simple_irq for all IRQ types and hard
codes the acknowledge for different IRQ types into the handler. It is
better to use the IRQ core as intended and let it handle the differences
between the various types of IRQ. For example the current system does
not work for threaded level triggered IRQs as these need to be masked
until the threaded handler has run.
Signed-off-by: default avatarCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 19ef697d
...@@ -403,15 +403,7 @@ static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id) ...@@ -403,15 +403,7 @@ static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
gpio = (32 * bank) + offset; gpio = (32 * bank) + offset;
type = pc->irq_type[gpio]; type = pc->irq_type[gpio];
/* ack edge triggered IRQs immediately */
if (!(type & IRQ_TYPE_LEVEL_MASK))
bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio)); generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio));
/* ack level triggered IRQ after handling them */
if (type & IRQ_TYPE_LEVEL_MASK)
bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
} }
return events ? IRQ_HANDLED : IRQ_NONE; return events ? IRQ_HANDLED : IRQ_NONE;
} }
...@@ -591,16 +583,32 @@ static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type) ...@@ -591,16 +583,32 @@ static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
else else
ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type); ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type);
if (type & IRQ_TYPE_EDGE_BOTH)
__irq_set_handler_locked(data->irq, handle_edge_irq);
else
__irq_set_handler_locked(data->irq, handle_level_irq);
spin_unlock_irqrestore(&pc->irq_lock[bank], flags); spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
return ret; return ret;
} }
static void bcm2835_gpio_irq_ack(struct irq_data *data)
{
struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
unsigned gpio = irqd_to_hwirq(data);
bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
}
static struct irq_chip bcm2835_gpio_irq_chip = { static struct irq_chip bcm2835_gpio_irq_chip = {
.name = MODULE_NAME, .name = MODULE_NAME,
.irq_enable = bcm2835_gpio_irq_enable, .irq_enable = bcm2835_gpio_irq_enable,
.irq_disable = bcm2835_gpio_irq_disable, .irq_disable = bcm2835_gpio_irq_disable,
.irq_set_type = bcm2835_gpio_irq_set_type, .irq_set_type = bcm2835_gpio_irq_set_type,
.irq_ack = bcm2835_gpio_irq_ack,
.irq_mask = bcm2835_gpio_irq_disable,
.irq_unmask = bcm2835_gpio_irq_enable,
}; };
static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev) static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
...@@ -977,7 +985,7 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev) ...@@ -977,7 +985,7 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
int irq = irq_create_mapping(pc->irq_domain, i); int irq = irq_create_mapping(pc->irq_domain, i);
irq_set_lockdep_class(irq, &gpio_lock_class); irq_set_lockdep_class(irq, &gpio_lock_class);
irq_set_chip_and_handler(irq, &bcm2835_gpio_irq_chip, irq_set_chip_and_handler(irq, &bcm2835_gpio_irq_chip,
handle_simple_irq); handle_level_irq);
irq_set_chip_data(irq, pc); irq_set_chip_data(irq, pc);
set_irq_flags(irq, IRQF_VALID); set_irq_flags(irq, IRQF_VALID);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment