Commit b90b925f authored by Sameer Pujar's avatar Sameer Pujar Committed by Takashi Iwai

ALSA: hda: avoid reset of sdo_limit

By default 'sdo_limit' is initialized with a default value of '8'
as per spec. This is overridden in cases where a different value is
required. However this is getting reset when snd_hdac_bus_init_chip()
is called again, which happens during runtime PM cycle.

Avoid this reset by moving 'sdo_limit' setup to 'snd_hdac_bus_init()'
function which would be called only once.

Fixes: 67ae482a ("ALSA: hda: add member to store ratio for stripe control")
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarSameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1597851130-6765-1-git-send-email-spujar@nvidia.comSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent e17f02d0
...@@ -46,6 +46,18 @@ int snd_hdac_bus_init(struct hdac_bus *bus, struct device *dev, ...@@ -46,6 +46,18 @@ int snd_hdac_bus_init(struct hdac_bus *bus, struct device *dev,
INIT_LIST_HEAD(&bus->hlink_list); INIT_LIST_HEAD(&bus->hlink_list);
init_waitqueue_head(&bus->rirb_wq); init_waitqueue_head(&bus->rirb_wq);
bus->irq = -1; bus->irq = -1;
/*
* Default value of '8' is as per the HD audio specification (Rev 1.0a).
* Following relation is used to derive STRIPE control value.
* For sample rate <= 48K:
* { ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
* For sample rate > 48K:
* { ((num_channels * bits_per_sample * rate/48000) /
* number of SDOs) >= 8 }
*/
bus->sdo_limit = 8;
return 0; return 0;
} }
EXPORT_SYMBOL_GPL(snd_hdac_bus_init); EXPORT_SYMBOL_GPL(snd_hdac_bus_init);
......
...@@ -529,17 +529,6 @@ bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset) ...@@ -529,17 +529,6 @@ bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset)
bus->chip_init = true; bus->chip_init = true;
/*
* Default value of '8' is as per the HD audio specification (Rev 1.0a).
* Following relation is used to derive STRIPE control value.
* For sample rate <= 48K:
* { ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
* For sample rate > 48K:
* { ((num_channels * bits_per_sample * rate/48000) /
* number of SDOs) >= 8 }
*/
bus->sdo_limit = 8;
return true; return true;
} }
EXPORT_SYMBOL_GPL(snd_hdac_bus_init_chip); EXPORT_SYMBOL_GPL(snd_hdac_bus_init_chip);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment