Commit b938662d authored by Himanshu Madhani's avatar Himanshu Madhani Committed by David S. Miller

qlcnic: Fix ethtool supported port status for 83xx

o Fix display for interface while using 'ethtool <device>' for 83xx adapter
Signed-off-by: default avatarHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: default avatarShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9fd13331
......@@ -429,6 +429,7 @@ struct qlcnic_hardware_context {
u16 port_type;
u16 board_type;
u16 supported_type;
u16 link_speed;
u16 link_duplex;
......@@ -1514,6 +1515,7 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter);
void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter);
void qlcnic_82xx_add_sysfs(struct qlcnic_adapter *adapter);
void qlcnic_82xx_remove_sysfs(struct qlcnic_adapter *adapter);
int qlcnic_82xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *, u32);
int qlcnicvf_config_led(struct qlcnic_adapter *, u32, u32);
......
......@@ -2830,6 +2830,23 @@ int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter)
break;
}
config = cmd.rsp.arg[3];
if (QLC_83XX_SFP_PRESENT(config)) {
switch (ahw->module_type) {
case LINKEVENT_MODULE_OPTICAL_UNKNOWN:
case LINKEVENT_MODULE_OPTICAL_SRLR:
case LINKEVENT_MODULE_OPTICAL_LRM:
case LINKEVENT_MODULE_OPTICAL_SFP_1G:
ahw->supported_type = PORT_FIBRE;
break;
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
case LINKEVENT_MODULE_TWINAX:
ahw->supported_type = PORT_TP;
break;
default:
ahw->supported_type = PORT_OTHER;
}
}
if (config & 1)
err = 1;
}
......@@ -2838,7 +2855,8 @@ int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter)
return config;
}
int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter)
int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
struct ethtool_cmd *ecmd)
{
u32 config = 0;
int status = 0;
......@@ -2851,6 +2869,54 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter)
ahw->module_type = QLC_83XX_SFP_MODULE_TYPE(config);
/* hard code until there is a way to get it from flash */
ahw->board_type = QLCNIC_BRDTYPE_83XX_10G;
if (netif_running(adapter->netdev) && ahw->has_link_events) {
ethtool_cmd_speed_set(ecmd, ahw->link_speed);
ecmd->duplex = ahw->link_duplex;
ecmd->autoneg = ahw->link_autoneg;
} else {
ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
ecmd->duplex = DUPLEX_UNKNOWN;
ecmd->autoneg = AUTONEG_DISABLE;
}
if (ahw->port_type == QLCNIC_XGBE) {
ecmd->supported = SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_1000baseT_Full;
} else {
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
ecmd->advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
}
switch (ahw->supported_type) {
case PORT_FIBRE:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
ecmd->transceiver = XCVR_EXTERNAL;
break;
case PORT_TP:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
ecmd->transceiver = XCVR_INTERNAL;
break;
default:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_OTHER;
ecmd->transceiver = XCVR_EXTERNAL;
break;
}
ecmd->phy_address = ahw->physical_port;
return status;
}
......
......@@ -603,7 +603,7 @@ int qlcnic_83xx_get_vnic_pf_info(struct qlcnic_adapter *, struct qlcnic_info *);
void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *);
void qlcnic_83xx_get_stats(struct qlcnic_adapter *adapter, u64 *data);
int qlcnic_83xx_get_settings(struct qlcnic_adapter *);
int qlcnic_83xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
int qlcnic_83xx_set_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *,
struct ethtool_pauseparam *);
......
......@@ -252,6 +252,18 @@ static int
qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
if (qlcnic_82xx_check(adapter))
return qlcnic_82xx_get_settings(adapter, ecmd);
else if (qlcnic_83xx_check(adapter))
return qlcnic_83xx_get_settings(adapter, ecmd);
return -EIO;
}
int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
struct ethtool_cmd *ecmd)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
u32 speed, reg;
int check_sfp_module = 0;
......@@ -277,10 +289,7 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
u32 val = 0;
if (qlcnic_83xx_check(adapter))
qlcnic_83xx_get_settings(adapter);
else
val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
if (val == QLCNIC_PORT_MODE_802_3_AP) {
ecmd->supported = SUPPORTED_1000baseT_Full;
......@@ -290,16 +299,13 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
ecmd->advertising = ADVERTISED_10000baseT_Full;
}
if (netif_running(dev) && adapter->ahw->has_link_events) {
if (qlcnic_82xx_check(adapter)) {
reg = QLCRD32(adapter,
P3P_LINK_SPEED_REG(pcifn));
speed = P3P_LINK_SPEED_VAL(pcifn, reg);
ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
}
ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
ecmd->autoneg = adapter->ahw->link_autoneg;
ecmd->duplex = adapter->ahw->link_duplex;
if (netif_running(adapter->netdev) && ahw->has_link_events) {
reg = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn));
speed = P3P_LINK_SPEED_VAL(pcifn, reg);
ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
ethtool_cmd_speed_set(ecmd, ahw->link_speed);
ecmd->autoneg = ahw->link_autoneg;
ecmd->duplex = ahw->link_duplex;
goto skip;
}
......@@ -341,8 +347,8 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
ecmd->advertising |= ADVERTISED_TP;
ecmd->supported |= SUPPORTED_TP;
check_sfp_module = netif_running(dev) &&
adapter->ahw->has_link_events;
check_sfp_module = netif_running(adapter->netdev) &&
ahw->has_link_events;
case QLCNIC_BRDTYPE_P3P_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
......@@ -356,8 +362,8 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
ecmd->advertising |=
(ADVERTISED_FIBRE | ADVERTISED_TP);
ecmd->port = PORT_FIBRE;
check_sfp_module = netif_running(dev) &&
adapter->ahw->has_link_events;
check_sfp_module = netif_running(adapter->netdev) &&
ahw->has_link_events;
} else {
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
......@@ -366,13 +372,6 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
ecmd->port = PORT_TP;
}
break;
case QLCNIC_BRDTYPE_83XX_10G:
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
ecmd->advertising |= (ADVERTISED_FIBRE | ADVERTISED_TP);
ecmd->port = PORT_FIBRE;
check_sfp_module = netif_running(dev) && ahw->has_link_events;
break;
default:
dev_err(&adapter->pdev->dev, "Unsupported board model %d\n",
adapter->ahw->board_type);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment