Commit b93984c9 authored by David Daney's avatar David Daney Committed by David S. Miller

netdev/phy: Fixup lockdep warnings in mdio-mux.c

With lockdep enabled we get:

=============================================
[ INFO: possible recursive locking detected ]
3.4.4-Cavium-Octeon+ #313 Not tainted
---------------------------------------------
kworker/u:1/36 is trying to acquire lock:
(&bus->mdio_lock){+.+...}, at: [<ffffffff813da7e8>] mdio_mux_read+0x38/0xa0

but task is already holding lock:
 (&bus->mdio_lock){+.+...}, at: [<ffffffff813d79e4>] mdiobus_read+0x44/0x88

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&bus->mdio_lock);
  lock(&bus->mdio_lock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation
.
.
.

This is a false positive, since we are indeed using 'nested' locking,
we need to use mutex_lock_nested().

Now in theory we can stack multiple MDIO multiplexers, but that would
require passing the nesting level (which is difficult to know) to
mutex_lock_nested().  Instead we assume the simple case of a single
level of nesting.  Since these are only warning messages, it isn't so
important to solve the general case.
Signed-off-by: default avatarDavid Daney <david.daney@cavium.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d4e41649
......@@ -46,7 +46,13 @@ static int mdio_mux_read(struct mii_bus *bus, int phy_id, int regnum)
struct mdio_mux_parent_bus *pb = cb->parent;
int r;
mutex_lock(&pb->mii_bus->mdio_lock);
/* In theory multiple mdio_mux could be stacked, thus creating
* more than a single level of nesting. But in practice,
* SINGLE_DEPTH_NESTING will cover the vast majority of use
* cases. We use it, instead of trying to handle the general
* case.
*/
mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING);
r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
if (r)
goto out;
......@@ -71,7 +77,7 @@ static int mdio_mux_write(struct mii_bus *bus, int phy_id,
int r;
mutex_lock(&pb->mii_bus->mdio_lock);
mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING);
r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
if (r)
goto out;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment