Commit b93cf3f0 authored by Oliver Hartkopp's avatar Oliver Hartkopp Committed by David S. Miller

can: Fix driver Kconfig structure

In 2.6.32-rc the new EMS USB CAN driver was contributed and added the Kconfig
entry right behind an entry of the same *vendor*. This teared the SJA1000
based driver selection into pieces.

This fix cleans up the 2.6.32-rc Kconfig files for the CAN drivers and moves
the SJA1000 and USB Kconfig portions into the belonging directories.

As there are many new CAN drivers in the queue getting this cleanup into
2.6.32-rc would massively reduce the problems for the upcoming drivers.

Thanks,
Oliver
Signed-off-by: default avatarOliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: default avatarWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d0490cfd
...@@ -35,66 +35,16 @@ config CAN_CALC_BITTIMING ...@@ -35,66 +35,16 @@ config CAN_CALC_BITTIMING
arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
If unsure, say Y. If unsure, say Y.
config CAN_SJA1000
depends on CAN_DEV && HAS_IOMEM
tristate "Philips SJA1000"
---help---
Driver for the SJA1000 CAN controllers from Philips or NXP
config CAN_SJA1000_ISA
depends on CAN_SJA1000 && ISA
tristate "ISA Bus based legacy SJA1000 driver"
---help---
This driver adds legacy support for SJA1000 chips connected to
the ISA bus using I/O port, memory mapped or indirect access.
config CAN_SJA1000_PLATFORM
depends on CAN_SJA1000
tristate "Generic Platform Bus based SJA1000 driver"
---help---
This driver adds support for the SJA1000 chips connected to
the "platform bus" (Linux abstraction for directly to the
processor attached devices). Which can be found on various
boards from Phytec (http://www.phytec.de) like the PCM027,
PCM038.
config CAN_SJA1000_OF_PLATFORM
depends on CAN_SJA1000 && PPC_OF
tristate "Generic OF Platform Bus based SJA1000 driver"
---help---
This driver adds support for the SJA1000 chips connected to
the OpenFirmware "platform bus" found on embedded systems with
OpenFirmware bindings, e.g. if you have a PowerPC based system
you may want to enable this option.
config CAN_EMS_PCI
tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
depends on PCI && CAN_SJA1000
---help---
This driver is for the one, two or four channel CPC-PCI,
CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
(http://www.ems-wuensche.de).
config CAN_EMS_USB
tristate "EMS CPC-USB/ARM7 CAN/USB interface"
depends on USB && CAN_DEV
---help---
This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
config CAN_KVASER_PCI
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
depends on PCI && CAN_SJA1000
---help---
This driver is for the the PCIcanx and PCIcan cards (1, 2 or
4 channel) from Kvaser (http://www.kvaser.com).
config CAN_AT91 config CAN_AT91
tristate "Atmel AT91 onchip CAN controller" tristate "Atmel AT91 onchip CAN controller"
depends on CAN && CAN_DEV && ARCH_AT91SAM9263 depends on CAN_DEV && ARCH_AT91SAM9263
---help--- ---help---
This is a driver for the SoC CAN controller in Atmel's AT91SAM9263. This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
source "drivers/net/can/sja1000/Kconfig"
source "drivers/net/can/usb/Kconfig"
config CAN_DEBUG_DEVICES config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages" bool "CAN devices debugging messages"
depends on CAN depends on CAN
......
menuconfig CAN_SJA1000
tristate "Philips/NXP SJA1000 devices"
depends on CAN_DEV && HAS_IOMEM
if CAN_SJA1000
config CAN_SJA1000_ISA
tristate "ISA Bus based legacy SJA1000 driver"
depends on ISA
---help---
This driver adds legacy support for SJA1000 chips connected to
the ISA bus using I/O port, memory mapped or indirect access.
config CAN_SJA1000_PLATFORM
tristate "Generic Platform Bus based SJA1000 driver"
---help---
This driver adds support for the SJA1000 chips connected to
the "platform bus" (Linux abstraction for directly to the
processor attached devices). Which can be found on various
boards from Phytec (http://www.phytec.de) like the PCM027,
PCM038.
config CAN_SJA1000_OF_PLATFORM
tristate "Generic OF Platform Bus based SJA1000 driver"
depends on PPC_OF
---help---
This driver adds support for the SJA1000 chips connected to
the OpenFirmware "platform bus" found on embedded systems with
OpenFirmware bindings, e.g. if you have a PowerPC based system
you may want to enable this option.
config CAN_EMS_PCI
tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
depends on PCI
---help---
This driver is for the one, two or four channel CPC-PCI,
CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
(http://www.ems-wuensche.de).
config CAN_KVASER_PCI
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
depends on PCI
---help---
This driver is for the the PCIcanx and PCIcan cards (1, 2 or
4 channel) from Kvaser (http://www.kvaser.com).
endif
menu "CAN USB interfaces"
depends on USB && CAN_DEV
config CAN_EMS_USB
tristate "EMS CPC-USB/ARM7 CAN/USB interface"
---help---
This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
endmenu
...@@ -3,3 +3,5 @@ ...@@ -3,3 +3,5 @@
# #
obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment