Commit b96c7b4c authored by David S. Miller's avatar David S. Miller

Merge branch 'dsa-microchip-checking'

Rakesh Sankaranarayanan says:

====================
net: dsa: microchip: ksz_pwrite status check for lan937x and irq and error checking updates for ksz series

This patch series include following changes,
- Add KSZ9563 inside ksz_switch_chips. As per current structure,
KSZ9893 is reused inside ksz_switch_chips structure, but since
there is a mismatch in number of irq's, new member added for KSZ9563
and sku detected based on Global Chip ID 4 Register. Compatible
string from device tree mapped to KSZ9563 for spi and i2c mode
probes.
- Assign device interrupt during i2c probe operation.
- Add error checking for ksz_pwrite inside lan937x_change_mtu. After v6.0,
ksz_pwrite updated to have return type int instead of void, and
lan937x_change_mtu still uses ksz_pwrite without status verification.
- Add port_nirq as 3 for KSZ8563 switch family.
- Use dev_err_probe() instead of dev_err() to have more standardized error
formatting and logging.

v1 -> v2:
- Removed regmap validation patch from the series, planning to take
  up in future after checking for any better approach and studying
  the actual need for this change.
- Resolved error reported in ksz8863_smi.c file.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 380f9acd 9b183317
......@@ -152,11 +152,10 @@ static int ksz8863_smi_probe(struct mdio_device *mdiodev)
&regmap_smi[i], dev,
&rc);
if (IS_ERR(dev->regmap[i])) {
ret = PTR_ERR(dev->regmap[i]);
dev_err(&mdiodev->dev,
"Failed to initialize regmap%i: %d\n",
ksz8863_regmap_config[i].val_bits, ret);
return ret;
return dev_err_probe(&mdiodev->dev,
PTR_ERR(dev->regmap[i]),
"Failed to initialize regmap%i\n",
ksz8863_regmap_config[i].val_bits);
}
}
......
......@@ -195,7 +195,8 @@ int ksz9477_reset_switch(struct ksz_device *dev)
/* KSZ9893 compatible chips do not support refclk configuration */
if (dev->chip_id == KSZ9893_CHIP_ID ||
dev->chip_id == KSZ8563_CHIP_ID)
dev->chip_id == KSZ8563_CHIP_ID ||
dev->chip_id == KSZ9563_CHIP_ID)
return 0;
data8 = SW_ENABLE_REFCLKO;
......
......@@ -30,17 +30,17 @@ static int ksz9477_i2c_probe(struct i2c_client *i2c,
rc.lock_arg = &dev->regmap_mutex;
dev->regmap[i] = devm_regmap_init_i2c(i2c, &rc);
if (IS_ERR(dev->regmap[i])) {
ret = PTR_ERR(dev->regmap[i]);
dev_err(&i2c->dev,
"Failed to initialize regmap%i: %d\n",
ksz9477_regmap_config[i].val_bits, ret);
return ret;
return dev_err_probe(&i2c->dev, PTR_ERR(dev->regmap[i]),
"Failed to initialize regmap%i\n",
ksz9477_regmap_config[i].val_bits);
}
}
if (i2c->dev.platform_data)
dev->pdata = i2c->dev.platform_data;
dev->irq = i2c->irq;
ret = ksz_switch_register(dev);
/* Main DSA driver may not be started yet. */
......@@ -101,7 +101,7 @@ static const struct of_device_id ksz9477_dt_ids[] = {
},
{
.compatible = "microchip,ksz9563",
.data = &ksz_switch_chips[KSZ9893]
.data = &ksz_switch_chips[KSZ9563]
},
{
.compatible = "microchip,ksz8563",
......
......@@ -1039,6 +1039,7 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.num_statics = 16,
.cpu_ports = 0x07, /* can be configured as cpu port */
.port_cnt = 3, /* total port count */
.port_nirqs = 3,
.ops = &ksz9477_dev_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
......@@ -1282,6 +1283,31 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.gbit_capable = {true, true, true},
},
[KSZ9563] = {
.chip_id = KSZ9563_CHIP_ID,
.dev_name = "KSZ9563",
.num_vlans = 4096,
.num_alus = 4096,
.num_statics = 16,
.cpu_ports = 0x07, /* can be configured as cpu port */
.port_cnt = 3, /* total port count */
.port_nirqs = 3,
.ops = &ksz9477_dev_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
.regs = ksz9477_regs,
.masks = ksz9477_masks,
.shifts = ksz9477_shifts,
.xmii_ctrl0 = ksz9477_xmii_ctrl0,
.xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
.supports_mii = {false, false, true},
.supports_rmii = {false, false, true},
.supports_rgmii = {false, false, true},
.internal_phy = {true, true, false},
.gbit_capable = {true, true, true},
},
[KSZ9567] = {
.chip_id = KSZ9567_CHIP_ID,
.dev_name = "KSZ9567",
......@@ -2389,7 +2415,8 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
if (dev->chip_id == KSZ8830_CHIP_ID ||
dev->chip_id == KSZ8563_CHIP_ID ||
dev->chip_id == KSZ9893_CHIP_ID)
dev->chip_id == KSZ9893_CHIP_ID ||
dev->chip_id == KSZ9563_CHIP_ID)
proto = DSA_TAG_PROTO_KSZ9893;
if (dev->chip_id == KSZ9477_CHIP_ID ||
......@@ -2509,7 +2536,8 @@ static void ksz_set_xmii(struct ksz_device *dev, int port,
data8 |= bitval[P_RGMII_SEL];
/* On KSZ9893, disable RGMII in-band status support */
if (dev->chip_id == KSZ9893_CHIP_ID ||
dev->chip_id == KSZ8563_CHIP_ID)
dev->chip_id == KSZ8563_CHIP_ID ||
dev->chip_id == KSZ9563_CHIP_ID)
data8 &= ~P_MII_MAC_MODE;
break;
default:
......@@ -2782,6 +2810,8 @@ static int ksz_switch_detect(struct ksz_device *dev)
if (id4 == SKU_ID_KSZ8563)
dev->chip_id = KSZ8563_CHIP_ID;
else if (id4 == SKU_ID_KSZ9563)
dev->chip_id = KSZ9563_CHIP_ID;
else
dev->chip_id = KSZ9893_CHIP_ID;
......
......@@ -154,6 +154,7 @@ enum ksz_model {
KSZ9896,
KSZ9897,
KSZ9893,
KSZ9563,
KSZ9567,
LAN9370,
LAN9371,
......@@ -172,6 +173,7 @@ enum ksz_chip_id {
KSZ9896_CHIP_ID = 0x00989600,
KSZ9897_CHIP_ID = 0x00989700,
KSZ9893_CHIP_ID = 0x00989300,
KSZ9563_CHIP_ID = 0x00956300,
KSZ9567_CHIP_ID = 0x00956700,
LAN9370_CHIP_ID = 0x00937000,
LAN9371_CHIP_ID = 0x00937100,
......@@ -551,6 +553,7 @@ static inline int is_lan937x(struct ksz_device *dev)
/* KSZ9893, KSZ9563, KSZ8563 specific register */
#define REG_CHIP_ID4 0x0f
#define SKU_ID_KSZ8563 0x3c
#define SKU_ID_KSZ9563 0x1c
/* Driver set switch broadcast storm protection at 10% rate. */
#define BROADCAST_STORM_PROT_RATE 10
......
......@@ -71,11 +71,9 @@ static int ksz_spi_probe(struct spi_device *spi)
dev->regmap[i] = devm_regmap_init_spi(spi, &rc);
if (IS_ERR(dev->regmap[i])) {
ret = PTR_ERR(dev->regmap[i]);
dev_err(&spi->dev,
"Failed to initialize regmap%i: %d\n",
regmap_config[i].val_bits, ret);
return ret;
return dev_err_probe(&spi->dev, PTR_ERR(dev->regmap[i]),
"Failed to initialize regmap%i\n",
regmap_config[i].val_bits);
}
}
......@@ -163,7 +161,7 @@ static const struct of_device_id ksz_dt_ids[] = {
},
{
.compatible = "microchip,ksz9563",
.data = &ksz_switch_chips[KSZ9893]
.data = &ksz_switch_chips[KSZ9563]
},
{
.compatible = "microchip,ksz8563",
......
......@@ -242,7 +242,11 @@ int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu)
}
/* Write the frame size in PORT_MAX_FR_SIZE register */
ksz_pwrite16(dev, port, PORT_MAX_FR_SIZE, new_mtu);
ret = ksz_pwrite16(dev, port, PORT_MAX_FR_SIZE, new_mtu);
if (ret) {
dev_err(ds->dev, "failed to update mtu for port %d\n", port);
return ret;
}
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment