arm64: dts: qcom: msm8992: Add BLSP_I2C1 support

This will be required to support touchscreen on Lumia
devices.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005150313.149754-8-konradybcio@gmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/msm8992.dtsi

@@ -305,6 +305,22 @@ blsp1_uart2: serial@f991e000 {
 			status = "disabled";
 		};
 
+		blsp_i2c1: i2c@f9923000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9923000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+						<&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		blsp_i2c2: i2c@f9924000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0xf9924000 0x500>;
@@ -525,6 +541,20 @@ sdc1_rclk_off: rclk-off {
 				bias-pull-down;
 			};
 
+			i2c1_default: i2c1-default {
+				function = "blsp_i2c1";
+				pins = "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_sleep: i2c1-sleep {
+				function = "gpio";
+				pins = "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			i2c2_default: i2c2-default {
 				function = "blsp_i2c2";
 				pins = "gpio6", "gpio7";