mmc: Avoid open coding by using mmc_op_tuning()

Replace code with the already defined function. No functional changes.
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221124080031.14690-1-cw9316.lee@samsung.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/core/core.c

@@ -142,8 +142,7 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 	int err = cmd->error;
 
 	/* Flag re-tuning needed on CRC errors */
-	if (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
-	    cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 &&
+	if (!mmc_op_tuning(cmd->opcode) &&
 	    !host->retune_crc_disable &&
 	    (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) ||
 	    (mrq->data && mrq->data->error == -EILSEQ) ||

drivers/mmc/host/dw_mmc.c

@@ -334,8 +334,7 @@ static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
 	    cmdr == MMC_READ_MULTIPLE_BLOCK ||
 	    cmdr == MMC_WRITE_BLOCK ||
 	    cmdr == MMC_WRITE_MULTIPLE_BLOCK ||
-	    cmdr == MMC_SEND_TUNING_BLOCK ||
-	    cmdr == MMC_SEND_TUNING_BLOCK_HS200 ||
+	    mmc_op_tuning(cmdr) ||
 	    cmdr == MMC_GEN_CMD) {
 		stop->opcode = MMC_STOP_TRANSMISSION;
 		stop->arg = 0;

drivers/mmc/host/mtk-sd.c

@@ -1224,9 +1224,7 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
 
 	if (!sbc_error && !(events & MSDC_INT_CMDRDY)) {
 		if (events & MSDC_INT_CMDTMO ||
-		    (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
-		     cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 &&
-		     !host->hs400_tuning))
+		    (!mmc_op_tuning(cmd->opcode) && !host->hs400_tuning))
 			/*
 			 * should not clear fifo/interrupt as the tune data
 			 * may have already come when cmd19/cmd21 gets response
@@ -1320,9 +1318,7 @@ static void msdc_cmd_next(struct msdc_host *host,
 {
 	if ((cmd->error &&
 	    !(cmd->error == -EILSEQ &&
-	      (cmd->opcode == MMC_SEND_TUNING_BLOCK ||
-	       cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200 ||
-	       host->hs400_tuning))) ||
+	      (mmc_op_tuning(cmd->opcode) || host->hs400_tuning))) ||
 	    (mrq->sbc && mrq->sbc->error))
 		msdc_request_done(host, mrq);
 	else if (cmd == mrq->sbc)

drivers/mmc/host/sdhci-msm.c

@@ -2219,8 +2219,7 @@ static int __sdhci_msm_check_write(struct sdhci_host *host, u16 val, int reg)
 		if (!msm_host->use_cdr)
 			break;
 		if ((msm_host->transfer_mode & SDHCI_TRNS_READ) &&
-		    SDHCI_GET_CMD(val) != MMC_SEND_TUNING_BLOCK_HS200 &&
-		    SDHCI_GET_CMD(val) != MMC_SEND_TUNING_BLOCK)
+		    !mmc_op_tuning(SDHCI_GET_CMD(val)))
 			sdhci_msm_set_cdr(host, true);
 		else
 			sdhci_msm_set_cdr(host, false);

drivers/mmc/host/sdhci-pci-o2micro.c

@@ -326,8 +326,7 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		(host->timing != MMC_TIMING_UHS_SDR50))
 		return sdhci_execute_tuning(mmc, opcode);
 
-	if (WARN_ON((opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
-			(opcode != MMC_SEND_TUNING_BLOCK)))
+	if (WARN_ON(!mmc_op_tuning(opcode)))
 		return -EINVAL;
 
 	/* Force power mode enter L0 */

drivers/mmc/host/sdhci-tegra.c

@@ -268,13 +268,9 @@ static void tegra210_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
 {
 	bool is_tuning_cmd = 0;
 	bool clk_enabled;
-	u8 cmd;
 
-	if (reg == SDHCI_COMMAND) {
-		cmd = SDHCI_GET_CMD(val);
-		is_tuning_cmd = cmd == MMC_SEND_TUNING_BLOCK ||
-				cmd == MMC_SEND_TUNING_BLOCK_HS200;
-	}
+	if (reg == SDHCI_COMMAND)
+		is_tuning_cmd = mmc_op_tuning(SDHCI_GET_CMD(val));
 
 	if (is_tuning_cmd)
 		clk_enabled = tegra_sdhci_configure_card_clk(host, 0);

drivers/mmc/host/sdhci.c

@@ -1693,8 +1693,7 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 		flags |= SDHCI_CMD_INDEX;
 
 	/* CMD19 is special in that the Data Present Select should be set */
-	if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK ||
-	    cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
+	if (cmd->data || mmc_op_tuning(cmd->opcode))
 		flags |= SDHCI_CMD_DATA;
 
 	timeout = jiffies;
@@ -3374,8 +3373,6 @@ static void sdhci_adma_show_error(struct sdhci_host *host)
 
 static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 {
-	u32 command;
-
 	/*
 	 * CMD19 generates _only_ Buffer Read Ready interrupt if
 	 * use sdhci_send_tuning.
@@ -3384,9 +3381,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 	 * SDHCI_INT_DATA_AVAIL always there, stuck in irq storm.
 	 */
 	if (intmask & SDHCI_INT_DATA_AVAIL && !host->data) {
-		command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND));
-		if (command == MMC_SEND_TUNING_BLOCK ||
-		    command == MMC_SEND_TUNING_BLOCK_HS200) {
+		if (mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)))) {
 			host->tuning_done = 1;
 			wake_up(&host->buf_ready_int);
 			return;