Skip to content

L
linux
Commit b9c112f2 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'ti-k3-dt-fixes-for-v5.13' of... 

Merge tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/fixes

Devicetree fixes for TI K3 platforms for v5.13 merge window:

These minor fixes include:
* Fixups for device tree discovered during yaml conversion
* Fixups for missing dma-coherent property in j7200
* Removal of camera sensor node from am65 evm dts to overlay
  as camera sensor boards are variable.

* tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux:
  arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
  arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
  arm64: dts: ti: k3-*: Rename the TI-SCI node
  arm64: dts: ti: k3-am65-wakeup: Drop un-necessary properties from dmsc node
  arm64: dts: ti: k3-am65-wakeup: Add debug region to TI-SCI node
  arm64: dts: ti: k3-*: Rename the TI-SCI clocks node name
  arm64: dts: ti: j7200-main: Mark Main NAVSS as dma-coherent
  arm64: dts: ti: k3-am654-base-board: remove ov5640

Link: https://lore.kernel.org/r/20210518115634.467vgpbzplal5kou@obituarySigned-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 7468bed8 cab12bad
Hide whitespace changes
Inline Side-by-side
Showing with 45 additions and 63 deletions
arch/arm64/boot/dts/ti/k3-am64-main.dtsi
View file @ b9c112f2
......@@ -42,12 +42,12 @@ gic_its: msi-controller@1820000 {
};
};
dmss: dmss {
dmss: bus@48000000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
dma-ranges;
ranges;
ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
ti,sci-dev-id = <25>;
......@@ -134,7 +134,7 @@ main_pktdma: dma-controller@485c0000 {
};
};
dmsc: dmsc@44043000 {
dmsc: system-controller@44043000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
mbox-names = "rx", "tx";
......@@ -148,7 +148,7 @@ k3_pds: power-controller {
#power-domain-cells = <2>;
};
k3_clks: clocks {
k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
......@@ -373,8 +373,9 @@ main_spi4: spi@20140000 {
clocks = <&k3_clks 145 0>;
};
main_gpio_intr: interrupt-controller0 {
main_gpio_intr: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
reg = <0x00 0x00a00000 0x00 0x800>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
......
arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
View file @ b9c112f2
......@@ -74,8 +74,9 @@ mcu_spi1: spi@4b10000 {
clocks = <&k3_clks 148 0>;
};
mcu_gpio_intr: interrupt-controller1 {
mcu_gpio_intr: interrupt-controller@4210000 {
compatible = "ti,sci-intr";
reg = <0x00 0x04210000 0x00 0x200>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
......
arch/arm64/boot/dts/ti/k3-am65-main.dtsi
View file @ b9c112f2
......@@ -433,8 +433,9 @@ usb1_phy: phy@4110000 {
#phy-cells = <0>;
};
intr_main_gpio: interrupt-controller0 {
intr_main_gpio: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
reg = <0x0 0x00a00000 0x0 0x400>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
......@@ -444,18 +445,19 @@ intr_main_gpio: interrupt-controller0 {
ti,interrupt-ranges = <0 392 32>;
};
main-navss {
main_navss: bus@30800000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
dma-coherent;
dma-ranges;
ti,sci-dev-id = <118>;
intr_main_navss: interrupt-controller1 {
intr_main_navss: interrupt-controller@310e0000 {
compatible = "ti,sci-intr";
reg = <0x0 0x310e0000 0x0 0x2000>;
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;
......
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
View file @ b9c112f2
......@@ -116,11 +116,11 @@ adc {
};
};
mcu-navss {
mcu_navss: bus@28380000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
dma-coherent;
dma-ranges;
......
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
View file @ b9c112f2
......@@ -6,24 +6,24 @@
*/
&cbass_wakeup {
dmsc: dmsc {
dmsc: system-controller@44083000 {
compatible = "ti,am654-sci";
ti,host-id = <12>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
mbox-names = "rx", "tx";
mboxes= <&secure_proxy_main 11>,
<&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x44083000 0x1000>;
k3_pds: power-controller {
compatible = "ti,sci-pm-domain";
#power-domain-cells = <2>;
};
k3_clks: clocks {
k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
......@@ -69,8 +69,9 @@ wkup_i2c0: i2c@42120000 {
power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
};
intr_wkup_gpio: interrupt-controller2 {
intr_wkup_gpio: interrupt-controller@42200000 {
compatible = "ti,sci-intr";
reg = <0x42200000 0x200>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
......
arch/arm64/boot/dts/ti/k3-am654-base-board.dts
View file @ b9c112f2
......@@ -85,12 +85,6 @@ sw6 {
gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
};
};
clk_ov5640_fixed: clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
&wkup_pmx0 {
......@@ -287,23 +281,6 @@ &main_i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
ov5640: camera@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
clocks = <&clk_ov5640_fixed>;
clock-names = "xclk";
port {
csi2_cam0: endpoint {
remote-endpoint = <&csi2_phy0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
};
&main_i2c2 {
......@@ -496,14 +473,6 @@ flash@0{
};
};
&csi2_0 {
csi2_phy0: endpoint {
remote-endpoint = <&csi2_cam0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
&mcu_cpsw {
pinctrl-names = "default";
pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
......
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
View file @ b9c112f2
......@@ -68,8 +68,9 @@ gic_its: msi-controller@1820000 {
};
};
main_gpio_intr: interrupt-controller0 {
main_gpio_intr: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
reg = <0x00 0x00a00000 0x00 0x800>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
......@@ -85,9 +86,12 @@ main_navss: bus@30000000 {
#size-cells = <2>;
ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
ti,sci-dev-id = <199>;
dma-coherent;
dma-ranges;
main_navss_intr: interrupt-controller1 {
main_navss_intr: interrupt-controller@310e0000 {
compatible = "ti,sci-intr";
reg = <0x00 0x310e0000 0x00 0x4000>;
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;
......
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
View file @ b9c112f2
......@@ -6,7 +6,7 @@
*/
&cbass_mcu_wakeup {
dmsc: dmsc@44083000 {
dmsc: system-controller@44083000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
......@@ -23,7 +23,7 @@ k3_pds: power-controller {
#power-domain-cells = <2>;
};
k3_clks: clocks {
k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
......@@ -96,8 +96,9 @@ mcu_uart0: serial@40a00000 {
clock-names = "fclk";
};
wkup_gpio_intr: interrupt-controller2 {
wkup_gpio_intr: interrupt-controller@42200000 {
compatible = "ti,sci-intr";
reg = <0x00 0x42200000 0x00 0x400>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
......
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
View file @ b9c112f2
......@@ -76,8 +76,9 @@ gic_its: msi-controller@1820000 {
};
};
main_gpio_intr: interrupt-controller0 {
main_gpio_intr: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
reg = <0x00 0x00a00000 0x00 0x800>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
......@@ -87,18 +88,19 @@ main_gpio_intr: interrupt-controller0 {
ti,interrupt-ranges = <8 392 56>;
};
main-navss {
main_navss: bus@30000000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
dma-coherent;
dma-ranges;
ti,sci-dev-id = <199>;
main_navss_intr: interrupt-controller1 {
main_navss_intr: interrupt-controller@310e0000 {
compatible = "ti,sci-intr";
reg = <0x0 0x310e0000 0x0 0x4000>;
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;
......
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
View file @ b9c112f2
......@@ -6,7 +6,7 @@
*/
&cbass_mcu_wakeup {
dmsc: dmsc@44083000 {
dmsc: system-controller@44083000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
......@@ -23,7 +23,7 @@ k3_pds: power-controller {
#power-domain-cells = <2>;
};
k3_clks: clocks {
k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
......@@ -96,8 +96,9 @@ mcu_uart0: serial@40a00000 {
clock-names = "fclk";
};
wkup_gpio_intr: interrupt-controller2 {
wkup_gpio_intr: interrupt-controller@42200000 {
compatible = "ti,sci-intr";
reg = <0x00 0x42200000 0x00 0x400>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
......@@ -249,11 +250,11 @@ adc {
};
};
mcu-navss {
mcu_navss: bus@28380000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
dma-coherent;
dma-ranges;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7