Commit b9cedda2 authored by Russell King's avatar Russell King

ARM: Integrator: convert to generic time support

Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent ba02a215
......@@ -241,6 +241,7 @@ config ARCH_INTEGRATOR
select HAVE_CLK
select COMMON_CLKDEV
select ICST525
select GENERIC_TIME
help
Support for ARM's Integrator platform.
......
extern void integrator_time_init(unsigned long, unsigned int);
extern unsigned long integrator_gettimeoffset(void);
......@@ -19,6 +19,7 @@
#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <linux/clocksource.h>
#include <linux/io.h>
#include <asm/clkdev.h>
......@@ -225,7 +226,6 @@ EXPORT_SYMBOL(cm_control);
#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000)
#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100)
#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200)
#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE)
/*
* How long is the timer interval?
......@@ -241,42 +241,38 @@ EXPORT_SYMBOL(cm_control);
static unsigned long timer_reload;
/*
* Returns number of ms since last clock interrupt. Note that interrupts
* will have been disabled by do_gettimeoffset()
*/
unsigned long integrator_gettimeoffset(void)
static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
static cycle_t timersp_read(struct clocksource *cs)
{
unsigned long ticks1, ticks2, status;
return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
}
/*
* Get the current number of ticks. Note that there is a race
* condition between us reading the timer and checking for
* an interrupt. We get around this by ensuring that the
* counter has not reloaded between our two reads.
*/
ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
do {
ticks1 = ticks2;
status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
} while (ticks2 > ticks1);
static struct clocksource clocksource_timersp = {
.name = "timer2",
.rating = 200,
.read = timersp_read,
.mask = CLOCKSOURCE_MASK(16),
.shift = 16,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/*
* Number of ticks since last interrupt.
*/
ticks1 = timer_reload - ticks2;
static void integrator_clocksource_init(u32 khz)
{
struct clocksource *cs = &clocksource_timersp;
void __iomem *base = clksrc_base;
u32 ctrl = TIMER_CTRL_ENABLE;
/*
* Interrupt pending? If so, we've reloaded once already.
*/
if (status & (1 << IRQ_TIMERINT1))
ticks1 += timer_reload;
if (khz >= 1500) {
khz /= 16;
ctrl = TIMER_CTRL_DIV16;
}
/*
* Convert the ticks to usecs
*/
return TICKS2USECS(ticks1);
writel(ctrl, base + TIMER_CTRL);
writel(0xffff, base + TIMER_LOAD);
cs->mult = clocksource_khz2mult(khz, cs->shift);
clocksource_register(cs);
}
/*
......@@ -308,6 +304,8 @@ void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
{
unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
integrator_clocksource_init(reload * HZ / 1000);
timer_reload = reload;
timer_ctrl |= ctrl;
......
......@@ -342,7 +342,6 @@ static void __init ap_init_timer(void)
static struct sys_timer ap_timer = {
.init = ap_init_timer,
.offset = integrator_gettimeoffset,
};
MACHINE_START(INTEGRATOR, "ARM-Integrator")
......
......@@ -577,7 +577,6 @@ static void __init intcp_timer_init(void)
static struct sys_timer cp_timer = {
.init = intcp_timer_init,
.offset = integrator_gettimeoffset,
};
MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment