Commit ba01a87e authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'usb-target-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

Pull usb-gadget scsi-target merge from Nicholas Bellinger:
 "As promised, here is the pull request for Sebastian's usb-gadget
  target UASP / BOT driver for v3.5-rc1.  This code has been in
  linux-next for a number of weeks, and is now ready for an initial
  merge.

  This fabric uses the target framework to provide a usb gadget device.
  This gadget supports the USB Attached SCSI Protocol (UASP) and Bulk
  Only Transfers (BOT or BBB).  BOT is the primary interface, UAS is the
  alternative interface.

  Note this series is dependent upon a single target core patch for
  adding se_cmd->unknown_data_length in target-pending/for-next, that
  got merged in the parent.

  Kudos to Sebastian for making this driver happen so easily, and for
  his patches to improve usb-core and target core along the way to his
  goal.  Also thanks to Felipe + Greg-KH for their help in getting this
  driver ready for mainline."

* 'usb-target-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  usb-gadget: Initial merge of target module for UASP + BOT
parents c9bfa7d7 c52661d6
...@@ -798,6 +798,16 @@ config USB_MASS_STORAGE ...@@ -798,6 +798,16 @@ config USB_MASS_STORAGE
Say "y" to link the driver statically, or "m" to build Say "y" to link the driver statically, or "m" to build
a dynamically linked module called "g_mass_storage". a dynamically linked module called "g_mass_storage".
config USB_GADGET_TARGET
tristate "USB Gadget Target Fabric Module"
depends on TARGET_CORE
help
This fabric is an USB gadget. Two USB protocols are supported that is
BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
advertised on alternative interface 0 (primary) and UAS is on
alternative interface 1. Both protocols can work on USB2.0 and USB3.0.
UAS utilizes the USB 3.0 feature called streams support.
config USB_G_SERIAL config USB_G_SERIAL
tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
help help
......
...@@ -52,6 +52,7 @@ g_nokia-y := nokia.o ...@@ -52,6 +52,7 @@ g_nokia-y := nokia.o
g_webcam-y := webcam.o g_webcam-y := webcam.o
g_ncm-y := ncm.o g_ncm-y := ncm.o
g_acm_ms-y := acm_ms.o g_acm_ms-y := acm_ms.o
g_tcm_usb_gadget-y := tcm_usb_gadget.o
obj-$(CONFIG_USB_ZERO) += g_zero.o obj-$(CONFIG_USB_ZERO) += g_zero.o
obj-$(CONFIG_USB_AUDIO) += g_audio.o obj-$(CONFIG_USB_AUDIO) += g_audio.o
...@@ -71,3 +72,4 @@ obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o ...@@ -71,3 +72,4 @@ obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o
obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o
obj-$(CONFIG_USB_G_NCM) += g_ncm.o obj-$(CONFIG_USB_G_NCM) += g_ncm.o
obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o
obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o
This diff is collapsed.
#ifndef __TARGET_USB_GADGET_H__
#define __TARGET_USB_GADGET_H__
#include <linux/kref.h>
/* #include <linux/usb/uas.h> */
#include <linux/usb/composite.h>
#include <linux/usb/uas.h>
#include <linux/usb/storage.h>
#include <scsi/scsi.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>
#define USBG_NAMELEN 32
#define fuas_to_gadget(f) (f->function.config->cdev->gadget)
#define UASP_SS_EP_COMP_LOG_STREAMS 4
#define UASP_SS_EP_COMP_NUM_STREAMS (1 << UASP_SS_EP_COMP_LOG_STREAMS)
#define USB_G_STR_MANUFACTOR 1
#define USB_G_STR_PRODUCT 2
#define USB_G_STR_SERIAL 3
#define USB_G_STR_CONFIG 4
#define USB_G_STR_INT_UAS 5
#define USB_G_STR_INT_BBB 6
#define USB_G_ALT_INT_BBB 0
#define USB_G_ALT_INT_UAS 1
struct usbg_nacl {
/* Binary World Wide unique Port Name for SAS Initiator port */
u64 iport_wwpn;
/* ASCII formatted WWPN for Sas Initiator port */
char iport_name[USBG_NAMELEN];
/* Returned by usbg_make_nodeacl() */
struct se_node_acl se_node_acl;
};
struct tcm_usbg_nexus {
struct se_session *tvn_se_sess;
};
struct usbg_tpg {
struct mutex tpg_mutex;
/* SAS port target portal group tag for TCM */
u16 tport_tpgt;
/* Pointer back to usbg_tport */
struct usbg_tport *tport;
struct workqueue_struct *workqueue;
/* Returned by usbg_make_tpg() */
struct se_portal_group se_tpg;
u32 gadget_connect;
struct tcm_usbg_nexus *tpg_nexus;
atomic_t tpg_port_count;
};
struct usbg_tport {
/* SCSI protocol the tport is providing */
u8 tport_proto_id;
/* Binary World Wide unique Port Name for SAS Target port */
u64 tport_wwpn;
/* ASCII formatted WWPN for SAS Target port */
char tport_name[USBG_NAMELEN];
/* Returned by usbg_make_tport() */
struct se_wwn tport_wwn;
};
enum uas_state {
UASP_SEND_DATA,
UASP_RECEIVE_DATA,
UASP_SEND_STATUS,
UASP_QUEUE_COMMAND,
};
#define USBG_MAX_CMD 64
struct usbg_cmd {
/* common */
u8 cmd_buf[USBG_MAX_CMD];
u32 data_len;
struct work_struct work;
int unpacked_lun;
struct se_cmd se_cmd;
void *data_buf; /* used if no sg support available */
struct f_uas *fu;
struct completion write_complete;
struct kref ref;
/* UAS only */
u16 tag;
u16 prio_attr;
struct sense_iu sense_iu;
enum uas_state state;
struct uas_stream *stream;
/* BOT only */
__le32 bot_tag;
unsigned int csw_code;
unsigned is_read:1;
};
struct uas_stream {
struct usb_request *req_in;
struct usb_request *req_out;
struct usb_request *req_status;
};
struct usbg_cdb {
struct usb_request *req;
void *buf;
};
struct bot_status {
struct usb_request *req;
struct bulk_cs_wrap csw;
};
struct f_uas {
struct usbg_tpg *tpg;
struct usb_function function;
u16 iface;
u32 flags;
#define USBG_ENABLED (1 << 0)
#define USBG_IS_UAS (1 << 1)
#define USBG_USE_STREAMS (1 << 2)
#define USBG_IS_BOT (1 << 3)
#define USBG_BOT_CMD_PEND (1 << 4)
struct usbg_cdb cmd;
struct usb_ep *ep_in;
struct usb_ep *ep_out;
/* UAS */
struct usb_ep *ep_status;
struct usb_ep *ep_cmd;
struct uas_stream stream[UASP_SS_EP_COMP_NUM_STREAMS];
/* BOT */
struct bot_status bot_status;
struct usb_request *bot_req_in;
struct usb_request *bot_req_out;
};
extern struct usbg_tpg *the_only_tpg_I_currently_have;
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment