Commit ba0abee7 authored by Manivannan Sadhasivam's avatar Manivannan Sadhasivam Committed by Heiko Stuebner

arm64: dts: rockchip: Add on-board LED support on rk3399-ficus

Add on-board LED support for Ficus board based on the following
standard used by other 96Boards:

red:user1  default-trigger: heartbeat
red:user2  default-trigger: mmc0/disk-activity (onboard-storage)
red:user3  default-trigger: mmc1 (SD-card)
red:user4  default-trigger: none, panic-indicator
red:wlan   default-trigger: phy0tx
red:bt     default-trigger: hci0-power
Signed-off-by: default avatarManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent f7cb866a
......@@ -23,6 +23,52 @@ clkin_gmac: external-gmac-clock {
clock-output-names = "clkin_gmac";
#clock-cells = <0>;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
<&user_led4>, <&wlan_led>, <&bt_led>;
user_led1 {
label = "red:user1";
gpios = <&gpio4 25 0>;
linux,default-trigger = "heartbeat";
};
user_led2 {
label = "red:user2";
gpios = <&gpio4 26 0>;
linux,default-trigger = "mmc0";
};
user_led3 {
label = "red:user3";
gpios = <&gpio4 30 0>;
linux,default-trigger = "mmc1";
};
user_led4 {
label = "red:user4";
gpios = <&gpio1 0 0>;
panic-indicator;
linux,default-trigger = "none";
};
wlan_active_led {
label = "red:wlan";
gpios = <&gpio1 1 0>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
bt_active_led {
label = "red:bt";
gpios = <&gpio1 4 0>;
linux,default-trigger = "hci0-power";
default-state = "off";
};
};
};
&gmac {
......@@ -66,6 +112,38 @@ host_vbus_drv: host-vbus-drv {
<4 27 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
user_led1: user_led1 {
rockchip,pins =
<4 25 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led2: user_led2 {
rockchip,pins =
<4 26 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led3: user_led3 {
rockchip,pins =
<4 30 RK_FUNC_GPIO &pcfg_pull_none>;
};
user_led4: user_led4 {
rockchip,pins =
<1 0 RK_FUNC_GPIO &pcfg_pull_none>;
};
wlan_led: wlan_led {
rockchip,pins =
<1 1 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_led: bt_led {
rockchip,pins =
<1 4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&usbdrd_dwc3_0 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment