staging: dwc2: fix wrong setting of DMA masks

We were setting the DMA masks in dwc2_driver_probe(), but that is
before the driver parameters have been set to their default values.
That meant the DMA masks could be set wrong. Fix it by moving the
DMA mask setting into dwc2_hcd_init(), after the driver parameters
have been set.
Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/dwc2/hcd.c

@@ -2707,16 +2707,6 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
 		goto error1;
 	}
 
-	hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev));
-	if (!hcd)
-		goto error1;
-
-	hcd->has_tt = 1;
-
-	spin_lock_init(&hsotg->lock);
-	((struct wrapper_priv_data *) &hcd->hcd_priv)->hsotg = hsotg;
-	hsotg->priv = hcd;
-
 	/*
 	 * Store the contents of the hardware configuration registers here for
 	 * easy access later
@@ -2775,18 +2765,18 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
 	hsotg->frame_num_array = kzalloc(sizeof(*hsotg->frame_num_array) *
 					 FRAME_NUM_ARRAY_SIZE, GFP_KERNEL);
 	if (!hsotg->frame_num_array)
-		goto error2;
+		goto error1;
 	hsotg->last_frame_num_array = kzalloc(
 			sizeof(*hsotg->last_frame_num_array) *
 			FRAME_NUM_ARRAY_SIZE, GFP_KERNEL);
 	if (!hsotg->last_frame_num_array)
-		goto error2;
+		goto error1;
 	hsotg->last_frame_num = HFNUM_MAX_FRNUM;
 #endif
 
 	hsotg->core_params = kzalloc(sizeof(*hsotg->core_params), GFP_KERNEL);
 	if (!hsotg->core_params)
-		goto error2;
+		goto error1;
 
 	dwc2_set_uninitialized((int *)hsotg->core_params,
 			       sizeof(*hsotg->core_params) / sizeof(int));
@@ -2794,6 +2784,29 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
 	/* Validate parameter values */
 	dwc2_set_parameters(hsotg, params);
 
+	/* Set device flags indicating whether the HCD supports DMA */
+	if (hsotg->core_params->dma_enable > 0) {
+		if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0)
+			dev_warn(hsotg->dev,
+				 "can't enable workaround for >2GB RAM\n");
+		if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0)
+			dev_warn(hsotg->dev,
+				 "can't enable workaround for >2GB RAM\n");
+	} else {
+		dma_set_mask(hsotg->dev, 0);
+		dma_set_coherent_mask(hsotg->dev, 0);
+	}
+
+	hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev));
+	if (!hcd)
+		goto error1;
+
+	hcd->has_tt = 1;
+
+	spin_lock_init(&hsotg->lock);
+	((struct wrapper_priv_data *) &hcd->hcd_priv)->hsotg = hsotg;
+	hsotg->priv = hcd;
+
 	/* Initialize the DWC_otg core, and select the Phy type */
 	retval = dwc2_core_init(hsotg, true);
 	if (retval)
@@ -2903,6 +2916,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
 error3:
 	dwc2_hcd_release(hsotg);
 error2:
+	usb_put_hcd(hcd);
+error1:
 	kfree(hsotg->core_params);
 
 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
@@ -2910,8 +2925,6 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
 	kfree(hsotg->frame_num_array);
 #endif
 
-	usb_put_hcd(hcd);
-error1:
 	dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval);
 	return retval;
 }
@@ -2939,12 +2952,11 @@ void dwc2_hcd_remove(struct dwc2_hsotg *hsotg)
 	usb_remove_hcd(hcd);
 	hsotg->priv = NULL;
 	dwc2_hcd_release(hsotg);
+	usb_put_hcd(hcd);
 
 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
 	kfree(hsotg->last_frame_num_array);
 	kfree(hsotg->frame_num_array);
 #endif
-
-	usb_put_hcd(hcd);
 }
 EXPORT_SYMBOL_GPL(dwc2_hcd_remove);

drivers/staging/dwc2/pci.c

@@ -146,18 +146,6 @@ static int dwc2_driver_probe(struct pci_dev *dev,
 
 	pci_set_master(dev);
 
-	if (dwc2_module_params.dma_enable > 0) {
-		if (pci_set_dma_mask(dev, DMA_BIT_MASK(31)) < 0)
-			dev_warn(&dev->dev,
-				 "can't enable workaround for >2GB RAM\n");
-		if (pci_set_consistent_dma_mask(dev, DMA_BIT_MASK(31)) < 0)
-			dev_warn(&dev->dev,
-				 "can't enable workaround for >2GB RAM\n");
-	} else {
-		pci_set_dma_mask(dev, 0);
-		pci_set_consistent_dma_mask(dev, 0);
-	}
-
 	retval = dwc2_hcd_init(hsotg, dev->irq, &dwc2_module_params);
 	if (retval) {
 		pci_disable_device(dev);