md: range check slot number when manually adding a spare.

When adding a spare to an active array, we should check the slot
number, but allow it to be larger than raid_disks if a reshape
is being prepared.

Apply the same test when adding a device to an
array-under-construction.  It already had most of the test in place,
but not quite all.
Signed-off-by: NeilBrown <neilb@suse.de>

drivers/md/md.c

@@ -2479,6 +2479,10 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 			if (rdev2->raid_disk == slot)
 				return -EEXIST;
 
+		if (slot >= rdev->mddev->raid_disks &&
+		    slot >= rdev->mddev->raid_disks + rdev->mddev->delta_disks)
+			return -ENOSPC;
+
 		rdev->raid_disk = slot;
 		if (test_bit(In_sync, &rdev->flags))
 			rdev->saved_raid_disk = slot;
@@ -2496,7 +2500,8 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 			/* failure here is OK */;
 		/* don't wakeup anyone, leave that to userspace. */
 	} else {
-		if (slot >= rdev->mddev->raid_disks)
+		if (slot >= rdev->mddev->raid_disks &&
+		    slot >= rdev->mddev->raid_disks + rdev->mddev->delta_disks)
 			return -ENOSPC;
 		rdev->raid_disk = slot;
 		/* assume it is working */