Commit ba264b34 authored by Pete Popov's avatar Pete Popov Committed by Ralf Baechle

Au1[12]00 mmc driver. Only tested on the Au1200 at this point though

it should work on the Au1100 as well. Updated defconfig to include driver.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent bab056aa
......@@ -7,6 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/config.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -114,6 +115,24 @@ static struct resource au1xxx_usb_gdt_resources[] = {
},
};
static struct resource au1xxx_mmc_resources[] = {
[0] = {
.start = SD0_PHYS_ADDR,
.end = SD0_PHYS_ADDR + 0x40,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = SD1_PHYS_ADDR,
.end = SD1_PHYS_ADDR + 0x40,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = AU1200_SD_INT,
.end = AU1200_SD_INT,
.flags = IORESOURCE_IRQ,
}
};
static u64 udc_dmamask = ~(u32)0;
static struct platform_device au1xxx_usb_gdt_device = {
......@@ -207,6 +226,20 @@ static struct platform_device au1200_ide0_device = {
.resource = au1200_ide0_resources,
};
static u64 au1xxx_mmc_dmamask = ~(u32)0;
static struct platform_device au1xxx_mmc_device = {
.name = "au1xxx-mmc",
.id = 0,
.dev = {
.dma_mask = &au1xxx_mmc_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(au1xxx_mmc_resources),
.resource = au1xxx_mmc_resources,
};
#endif /* #ifdef CONFIG_SOC_AU1200 */
static struct platform_device au1x00_pcmcia_device = {
.name = "au1x00-pcmcia",
.id = 0,
......@@ -226,6 +259,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1xxx_usb_otg_device,
&au1200_lcd_device,
&au1200_ide0_device,
&au1xxx_mmc_device,
#endif
};
......
......@@ -60,4 +60,13 @@ config MMC_WBSD
If unsure, say N.
config MMC_AU1X
tristate "Alchemy AU1XX0 MMC Card Interface support"
depends on SOC_AU1X00 && MMC
help
This selects the AMD Alchemy(R) Multimedia card interface.
iIf you have a Alchemy platform with a MMC slot, say Y or M here.
If unsure, say N.
endmenu
......@@ -18,5 +18,6 @@ obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
obj-$(CONFIG_MMC_PXA) += pxamci.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
mmc_core-y := mmc.o mmc_queue.o mmc_sysfs.o
This diff is collapsed.
#ifndef _AU1XMMC_H_
#define _AU1XMMC_H_
/* Hardware definitions */
#define AU1XMMC_DESCRIPTOR_COUNT 1
#define AU1XMMC_DESCRIPTOR_SIZE 2048
#define AU1XMMC_OCR ( MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
/* Easy access macros */
#define HOST_STATUS(h) ((h)->iobase + SD_STATUS)
#define HOST_CONFIG(h) ((h)->iobase + SD_CONFIG)
#define HOST_ENABLE(h) ((h)->iobase + SD_ENABLE)
#define HOST_TXPORT(h) ((h)->iobase + SD_TXPORT)
#define HOST_RXPORT(h) ((h)->iobase + SD_RXPORT)
#define HOST_CMDARG(h) ((h)->iobase + SD_CMDARG)
#define HOST_BLKSIZE(h) ((h)->iobase + SD_BLKSIZE)
#define HOST_CMD(h) ((h)->iobase + SD_CMD)
#define HOST_CONFIG2(h) ((h)->iobase + SD_CONFIG2)
#define HOST_TIMEOUT(h) ((h)->iobase + SD_TIMEOUT)
#define HOST_DEBUG(h) ((h)->iobase + SD_DEBUG)
#define DMA_CHANNEL(h) \
( ((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
/* This gives us a hard value for the stop command that we can write directly
* to the command register
*/
#define STOP_CMD (SD_CMD_RT_1B|SD_CMD_CT_7|(0xC << SD_CMD_CI_SHIFT)|SD_CMD_GO)
/* This is the set of interrupts that we configure by default */
#if 0
#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_DD | \
SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
#endif
#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | \
SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I)
/* The poll event (looking for insert/remove events runs twice a second */
#define AU1XMMC_DETECT_TIMEOUT (HZ/2)
struct au1xmmc_host {
struct mmc_host *mmc;
struct mmc_request *mrq;
u32 id;
u32 flags;
u32 iobase;
u32 clock;
u32 bus_width;
u32 power_mode;
int status;
struct {
int len;
int dir;
} dma;
struct {
int index;
int offset;
int len;
} pio;
u32 tx_chan;
u32 rx_chan;
struct timer_list timer;
struct tasklet_struct finish_task;
struct tasklet_struct data_task;
spinlock_t lock;
};
/* Status flags used by the host structure */
#define HOST_F_XMIT 0x0001
#define HOST_F_RECV 0x0002
#define HOST_F_DMA 0x0010
#define HOST_F_ACTIVE 0x0100
#define HOST_F_STOP 0x1000
#define HOST_S_IDLE 0x0001
#define HOST_S_CMD 0x0002
#define HOST_S_DATA 0x0003
#define HOST_S_STOP 0x0004
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment