Commit ba2b137d authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management update from Zhang Rui:

 - Fix race condition in imx_thermal_probe() (Mikhail Lappo)

 - Add cooling device's statistics in sysfs (Viresh Kumar)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: Add cooling device's statistics in sysfs
  thermal: imx: Fix race condition in imx_thermal_probe()
parents 71893f11 b907b408
......@@ -255,6 +255,7 @@ temperature) and throttle appropriate devices.
2. sysfs attributes structure
RO read only value
WO write only value
RW read/write value
Thermal sysfs attributes will be represented under /sys/class/thermal.
......@@ -286,6 +287,11 @@ Thermal cooling device sys I/F, created once it's registered:
|---type: Type of the cooling device(processor/fan/...)
|---max_state: Maximum cooling state of the cooling device
|---cur_state: Current cooling state of the cooling device
|---stats: Directory containing cooling device's statistics
|---stats/reset: Writing any value resets the statistics
|---stats/time_in_state_ms: Time (msec) spent in various cooling states
|---stats/total_trans: Total number of times cooling state is changed
|---stats/trans_table: Cooing state transition table
Then next two dynamic attributes are created/removed in pairs. They represent
......@@ -490,6 +496,31 @@ cur_state
- cur_state == max_state means the maximum cooling.
RW, Required
stats/reset
Writing any value resets the cooling device's statistics.
WO, Required
stats/time_in_state_ms:
The amount of time spent by the cooling device in various cooling
states. The output will have "<state> <time>" pair in each line, which
will mean this cooling device spent <time> msec of time at <state>.
Output will have one line for each of the supported states. usertime
units here is 10mS (similar to other time exported in /proc).
RO, Required
stats/total_trans:
A single positive value showing the total number of times the state of a
cooling device is changed.
RO, Required
stats/trans_table:
This gives fine grained information about all the cooling state
transitions. The cat output here is a two dimensional matrix, where an
entry <i,j> (row i, column j) represents the number of transitions from
State_i to State_j. If the transition table is bigger than PAGE_SIZE,
reading this will return an -EFBIG error.
RO, Required
3. A simple implementation
ACPI thermal zone may support multiple trip points like critical, hot,
......
......@@ -15,6 +15,13 @@ menuconfig THERMAL
if THERMAL
config THERMAL_STATISTICS
bool "Thermal state transition statistics"
help
Export thermal state transition statistics information through sysfs.
If in doubt, say N.
config THERMAL_EMERGENCY_POWEROFF_DELAY_MS
int "Emergency poweroff delay in milli-seconds"
depends on THERMAL
......
......@@ -637,6 +637,9 @@ static int imx_thermal_probe(struct platform_device *pdev)
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
data->irq_enabled = true;
data->mode = THERMAL_DEVICE_ENABLED;
ret = devm_request_threaded_irq(&pdev->dev, data->irq,
imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
0, "imx_thermal", data);
......@@ -649,9 +652,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
return ret;
}
data->irq_enabled = true;
data->mode = THERMAL_DEVICE_ENABLED;
return 0;
}
......
......@@ -972,8 +972,8 @@ __thermal_cooling_device_register(struct device_node *np,
cdev->ops = ops;
cdev->updated = false;
cdev->device.class = &thermal_class;
thermal_cooling_device_setup_sysfs(cdev);
cdev->devdata = devdata;
thermal_cooling_device_setup_sysfs(cdev);
dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
result = device_register(&cdev->device);
if (result) {
......@@ -1106,6 +1106,7 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
ida_simple_remove(&thermal_cdev_ida, cdev->id);
device_unregister(&cdev->device);
thermal_cooling_device_destroy_sysfs(cdev);
}
EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister);
......
......@@ -73,6 +73,7 @@ int thermal_build_list_of_policies(char *buf);
int thermal_zone_create_device_groups(struct thermal_zone_device *, int);
void thermal_zone_destroy_device_groups(struct thermal_zone_device *);
void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *);
void thermal_cooling_device_destroy_sysfs(struct thermal_cooling_device *cdev);
/* used only at binding time */
ssize_t
thermal_cooling_device_trip_point_show(struct device *,
......@@ -84,6 +85,15 @@ ssize_t thermal_cooling_device_weight_store(struct device *,
struct device_attribute *,
const char *, size_t);
#ifdef CONFIG_THERMAL_STATISTICS
void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
unsigned long new_state);
#else
static inline void
thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
unsigned long new_state) {}
#endif /* CONFIG_THERMAL_STATISTICS */
#ifdef CONFIG_THERMAL_GOV_STEP_WISE
int thermal_gov_step_wise_register(void);
void thermal_gov_step_wise_unregister(void);
......
......@@ -187,7 +187,10 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
if (instance->target > target)
target = instance->target;
}
cdev->ops->set_cur_state(cdev, target);
if (!cdev->ops->set_cur_state(cdev, target))
thermal_cooling_device_stats_update(cdev, target);
cdev->updated = true;
mutex_unlock(&cdev->lock);
trace_cdev_update(cdev, target);
......
......@@ -20,6 +20,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/jiffies.h>
#include "thermal_core.h"
......@@ -721,6 +722,7 @@ thermal_cooling_device_cur_state_store(struct device *dev,
result = cdev->ops->set_cur_state(cdev, state);
if (result)
return result;
thermal_cooling_device_stats_update(cdev, state);
return count;
}
......@@ -745,14 +747,237 @@ static const struct attribute_group cooling_device_attr_group = {
static const struct attribute_group *cooling_device_attr_groups[] = {
&cooling_device_attr_group,
NULL, /* Space allocated for cooling_device_stats_attr_group */
NULL,
};
#ifdef CONFIG_THERMAL_STATISTICS
struct cooling_dev_stats {
spinlock_t lock;
unsigned int total_trans;
unsigned long state;
unsigned long max_states;
ktime_t last_time;
ktime_t *time_in_state;
unsigned int *trans_table;
};
static void update_time_in_state(struct cooling_dev_stats *stats)
{
ktime_t now = ktime_get(), delta;
delta = ktime_sub(now, stats->last_time);
stats->time_in_state[stats->state] =
ktime_add(stats->time_in_state[stats->state], delta);
stats->last_time = now;
}
void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
unsigned long new_state)
{
struct cooling_dev_stats *stats = cdev->stats;
spin_lock(&stats->lock);
if (stats->state == new_state)
goto unlock;
update_time_in_state(stats);
stats->trans_table[stats->state * stats->max_states + new_state]++;
stats->state = new_state;
stats->total_trans++;
unlock:
spin_unlock(&stats->lock);
}
static ssize_t
thermal_cooling_device_total_trans_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
struct cooling_dev_stats *stats = cdev->stats;
int ret;
spin_lock(&stats->lock);
ret = sprintf(buf, "%u\n", stats->total_trans);
spin_unlock(&stats->lock);
return ret;
}
static ssize_t
thermal_cooling_device_time_in_state_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
struct cooling_dev_stats *stats = cdev->stats;
ssize_t len = 0;
int i;
spin_lock(&stats->lock);
update_time_in_state(stats);
for (i = 0; i < stats->max_states; i++) {
len += sprintf(buf + len, "state%u\t%llu\n", i,
ktime_to_ms(stats->time_in_state[i]));
}
spin_unlock(&stats->lock);
return len;
}
static ssize_t
thermal_cooling_device_reset_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
struct cooling_dev_stats *stats = cdev->stats;
int i, states = stats->max_states;
spin_lock(&stats->lock);
stats->total_trans = 0;
stats->last_time = ktime_get();
memset(stats->trans_table, 0,
states * states * sizeof(*stats->trans_table));
for (i = 0; i < stats->max_states; i++)
stats->time_in_state[i] = ktime_set(0, 0);
spin_unlock(&stats->lock);
return count;
}
static ssize_t
thermal_cooling_device_trans_table_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
struct cooling_dev_stats *stats = cdev->stats;
ssize_t len = 0;
int i, j;
len += snprintf(buf + len, PAGE_SIZE - len, " From : To\n");
len += snprintf(buf + len, PAGE_SIZE - len, " : ");
for (i = 0; i < stats->max_states; i++) {
if (len >= PAGE_SIZE)
break;
len += snprintf(buf + len, PAGE_SIZE - len, "state%2u ", i);
}
if (len >= PAGE_SIZE)
return PAGE_SIZE;
len += snprintf(buf + len, PAGE_SIZE - len, "\n");
for (i = 0; i < stats->max_states; i++) {
if (len >= PAGE_SIZE)
break;
len += snprintf(buf + len, PAGE_SIZE - len, "state%2u:", i);
for (j = 0; j < stats->max_states; j++) {
if (len >= PAGE_SIZE)
break;
len += snprintf(buf + len, PAGE_SIZE - len, "%8u ",
stats->trans_table[i * stats->max_states + j]);
}
if (len >= PAGE_SIZE)
break;
len += snprintf(buf + len, PAGE_SIZE - len, "\n");
}
if (len >= PAGE_SIZE) {
pr_warn_once("Thermal transition table exceeds PAGE_SIZE. Disabling\n");
return -EFBIG;
}
return len;
}
static DEVICE_ATTR(total_trans, 0444, thermal_cooling_device_total_trans_show,
NULL);
static DEVICE_ATTR(time_in_state_ms, 0444,
thermal_cooling_device_time_in_state_show, NULL);
static DEVICE_ATTR(reset, 0200, NULL, thermal_cooling_device_reset_store);
static DEVICE_ATTR(trans_table, 0444,
thermal_cooling_device_trans_table_show, NULL);
static struct attribute *cooling_device_stats_attrs[] = {
&dev_attr_total_trans.attr,
&dev_attr_time_in_state_ms.attr,
&dev_attr_reset.attr,
&dev_attr_trans_table.attr,
NULL
};
static const struct attribute_group cooling_device_stats_attr_group = {
.attrs = cooling_device_stats_attrs,
.name = "stats"
};
static void cooling_device_stats_setup(struct thermal_cooling_device *cdev)
{
struct cooling_dev_stats *stats;
unsigned long states;
int var;
if (cdev->ops->get_max_state(cdev, &states))
return;
states++; /* Total number of states is highest state + 1 */
var = sizeof(*stats);
var += sizeof(*stats->time_in_state) * states;
var += sizeof(*stats->trans_table) * states * states;
stats = kzalloc(var, GFP_KERNEL);
if (!stats)
return;
stats->time_in_state = (ktime_t *)(stats + 1);
stats->trans_table = (unsigned int *)(stats->time_in_state + states);
cdev->stats = stats;
stats->last_time = ktime_get();
stats->max_states = states;
spin_lock_init(&stats->lock);
/* Fill the empty slot left in cooling_device_attr_groups */
var = ARRAY_SIZE(cooling_device_attr_groups) - 2;
cooling_device_attr_groups[var] = &cooling_device_stats_attr_group;
}
static void cooling_device_stats_destroy(struct thermal_cooling_device *cdev)
{
kfree(cdev->stats);
cdev->stats = NULL;
}
#else
static inline void
cooling_device_stats_setup(struct thermal_cooling_device *cdev) {}
static inline void
cooling_device_stats_destroy(struct thermal_cooling_device *cdev) {}
#endif /* CONFIG_THERMAL_STATISTICS */
void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *cdev)
{
cooling_device_stats_setup(cdev);
cdev->device.groups = cooling_device_attr_groups;
}
void thermal_cooling_device_destroy_sysfs(struct thermal_cooling_device *cdev)
{
cooling_device_stats_destroy(cdev);
}
/* these helper will be used only at the time of bindig */
ssize_t
thermal_cooling_device_trip_point_show(struct device *dev,
......
......@@ -148,6 +148,7 @@ struct thermal_cooling_device {
struct device device;
struct device_node *np;
void *devdata;
void *stats;
const struct thermal_cooling_device_ops *ops;
bool updated; /* true if the cooling device does not need update */
struct mutex lock; /* protect thermal_instances list */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment