Merge tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of small USB fixes for reported problems for
  5.16-rc3

  They include:

   - typec driver fixes

   - new usb-serial driver ids

   - usb hub enumeration issues that were much reported

   - gadget driver fixes

   - dwc3 driver fix

   - chipidea driver fixe

  All of these have been in linux-next with no reported problems"

* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add Fibocom FM101-GL variants
  usb: typec: tipd: Fix initialization sequence for cd321x
  usb: typec: tipd: Fix typo in cd321x_switch_power_state
  usb: hub: Fix locking issues with address0_mutex
  USB: serial: pl2303: fix GC type detection
  USB: serial: option: add Telit LE910S1 0x9200 composition
  usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probe
  usb: hub: Fix usb enumeration issue due to address0 race
  usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts
  usb: dwc3: leave default DMA for PCI devices
  usb: dwc2: hcd_queue: Fix use of floating point literal
  usb: dwc3: gadget: Fix null pointer exception
  usb: gadget: udc-xilinx: Fix an error handling path in 'xudc_probe()'
  usb: xhci: tegra: Check padctrl interrupt presence in device tree
  usb: dwc2: gadget: Fix ISOC flow for elapsed frames
  usb: dwc3: gadget: Check for L1/L2/U3 for Start Transfer
  usb: dwc3: gadget: Ignore NoStream after End Transfer
  usb: dwc3: core: Revise GHWPARAMS9 offset

drivers/usb/chipidea/ci_hdrc_imx.c

@@ -420,15 +420,15 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 	data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0);
 	if (IS_ERR(data->phy)) {
 		ret = PTR_ERR(data->phy);
-		if (ret == -ENODEV) {
-			data->phy = devm_usb_get_phy_by_phandle(dev, "phys", 0);
-			if (IS_ERR(data->phy)) {
-				ret = PTR_ERR(data->phy);
-				if (ret == -ENODEV)
-					data->phy = NULL;
-				else
-					goto err_clk;
-			}
+		if (ret != -ENODEV)
+			goto err_clk;
+		data->phy = devm_usb_get_phy_by_phandle(dev, "phys", 0);
+		if (IS_ERR(data->phy)) {
+			ret = PTR_ERR(data->phy);
+			if (ret == -ENODEV)
+				data->phy = NULL;
+			else
+				goto err_clk;
 		}
 	}
 

drivers/usb/core/hub.c

@@ -4700,8 +4700,6 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (oldspeed == USB_SPEED_LOW)
 		delay = HUB_LONG_RESET_TIME;
 
-	mutex_lock(hcd->address0_mutex);
-
 	/* Reset the device; full speed may morph to high speed */
 	/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
 	retval = hub_port_reset(hub, port1, udev, delay, false);
@@ -5016,7 +5014,6 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 		hub_port_disable(hub, port1, 0);
 		update_devnum(udev, devnum);	/* for disconnect processing */
 	}
-	mutex_unlock(hcd->address0_mutex);
 	return retval;
 }
 
@@ -5191,6 +5188,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 	struct usb_port *port_dev = hub->ports[port1 - 1];
 	struct usb_device *udev = port_dev->child;
 	static int unreliable_port = -1;
+	bool retry_locked;
 
 	/* Disconnect any existing devices under this port */
 	if (udev) {
@@ -5246,8 +5244,11 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		unit_load = 100;
 
 	status = 0;
-	for (i = 0; i < PORT_INIT_TRIES; i++) {
 
+	for (i = 0; i < PORT_INIT_TRIES; i++) {
+		usb_lock_port(port_dev);
+		mutex_lock(hcd->address0_mutex);
+		retry_locked = true;
 		/* reallocate for each attempt, since references
 		 * to the previous one can escape in various ways
 		 */
@@ -5255,6 +5256,8 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		if (!udev) {
 			dev_err(&port_dev->dev,
 					"couldn't allocate usb_device\n");
+			mutex_unlock(hcd->address0_mutex);
+			usb_unlock_port(port_dev);
 			goto done;
 		}
 
@@ -5276,12 +5279,14 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		}
 
 		/* reset (non-USB 3.0 devices) and get descriptor */
-		usb_lock_port(port_dev);
 		status = hub_port_init(hub, udev, port1, i);
-		usb_unlock_port(port_dev);
 		if (status < 0)
 			goto loop;
 
+		mutex_unlock(hcd->address0_mutex);
+		usb_unlock_port(port_dev);
+		retry_locked = false;
+
 		if (udev->quirks & USB_QUIRK_DELAY_INIT)
 			msleep(2000);
 
@@ -5374,6 +5379,10 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		usb_ep0_reinit(udev);
 		release_devnum(udev);
 		hub_free_dev(udev);
+		if (retry_locked) {
+			mutex_unlock(hcd->address0_mutex);
+			usb_unlock_port(port_dev);
+		}
 		usb_put_dev(udev);
 		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
 			break;
@@ -5915,6 +5924,8 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	bos = udev->bos;
 	udev->bos = NULL;
 
+	mutex_lock(hcd->address0_mutex);
+
 	for (i = 0; i < PORT_INIT_TRIES; ++i) {
 
 		/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5924,6 +5935,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 		if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
 			break;
 	}
+	mutex_unlock(hcd->address0_mutex);
 
 	if (ret < 0)
 		goto re_enumerate;

drivers/usb/dwc2/gadget.c

@@ -1198,6 +1198,8 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
 			}
 			ctrl |= DXEPCTL_CNAK;
 		} else {
+			hs_req->req.frame_number = hs_ep->target_frame;
+			hs_req->req.actual = 0;
 			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA);
 			return;
 		}
@@ -2857,9 +2859,12 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep)
 
 	do {
 		hs_req = get_ep_head(hs_ep);
-		if (hs_req)
+		if (hs_req) {
+			hs_req->req.frame_number = hs_ep->target_frame;
+			hs_req->req.actual = 0;
 			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req,
 						    -ENODATA);
+		}
 		dwc2_gadget_incr_frame_num(hs_ep);
 		/* Update current frame number value. */
 		hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg);
@@ -2912,8 +2917,11 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep)
 
 	while (dwc2_gadget_target_frame_elapsed(ep)) {
 		hs_req = get_ep_head(ep);
-		if (hs_req)
+		if (hs_req) {
+			hs_req->req.frame_number = ep->target_frame;
+			hs_req->req.actual = 0;
 			dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA);
+		}
 
 		dwc2_gadget_incr_frame_num(ep);
 		/* Update current frame number value. */
@@ -3002,8 +3010,11 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep)
 
 	while (dwc2_gadget_target_frame_elapsed(hs_ep)) {
 		hs_req = get_ep_head(hs_ep);
-		if (hs_req)
+		if (hs_req) {
+			hs_req->req.frame_number = hs_ep->target_frame;
+			hs_req->req.actual = 0;
 			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA);
+		}
 
 		dwc2_gadget_incr_frame_num(hs_ep);
 		/* Update current frame number value. */

drivers/usb/dwc2/hcd_queue.c

@@ -59,7 +59,7 @@
 #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
 
 /* If we get a NAK, wait this long before retrying */
-#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
+#define DWC2_RETRY_WAIT_DELAY (1 * NSEC_PER_MSEC)
 
 /**
  * dwc2_periodic_channel_available() - Checks that a channel is available for a

drivers/usb/dwc3/core.c

@@ -1594,9 +1594,11 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	dwc3_get_properties(dwc);
 
-	ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64));
-	if (ret)
-		return ret;
+	if (!dwc->sysdev_is_parent) {
+		ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64));
+		if (ret)
+			return ret;
+	}
 
 	dwc->reset = devm_reset_control_array_get_optional_shared(dev);
 	if (IS_ERR(dwc->reset))

drivers/usb/dwc3/core.h

@@ -143,7 +143,7 @@
 #define DWC3_GHWPARAMS8		0xc600
 #define DWC3_GUCTL3		0xc60c
 #define DWC3_GFLADJ		0xc630
-#define DWC3_GHWPARAMS9		0xc680
+#define DWC3_GHWPARAMS9		0xc6e0
 
 /* Device Registers */
 #define DWC3_DCFG		0xc700

drivers/usb/dwc3/gadget.c

@@ -310,13 +310,24 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
 	if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) {
 		int link_state;
 
+		/*
+		 * Initiate remote wakeup if the link state is in U3 when
+		 * operating in SS/SSP or L1/L2 when operating in HS/FS. If the
+		 * link state is in U1/U2, no remote wakeup is needed. The Start
+		 * Transfer command will initiate the link recovery.
+		 */
 		link_state = dwc3_gadget_get_link_state(dwc);
-		if (link_state == DWC3_LINK_STATE_U1 ||
-		    link_state == DWC3_LINK_STATE_U2 ||
-		    link_state == DWC3_LINK_STATE_U3) {
+		switch (link_state) {
+		case DWC3_LINK_STATE_U2:
+			if (dwc->gadget->speed >= USB_SPEED_SUPER)
+				break;
+
+			fallthrough;
+		case DWC3_LINK_STATE_U3:
 			ret = __dwc3_gadget_wakeup(dwc);
 			dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n",
 					ret);
+			break;
 		}
 	}
 
@@ -3252,6 +3263,9 @@ static bool dwc3_gadget_endpoint_trbs_complete(struct dwc3_ep *dep,
 	struct dwc3		*dwc = dep->dwc;
 	bool			no_started_trb = true;
 
+	if (!dep->endpoint.desc)
+		return no_started_trb;
+
 	dwc3_gadget_ep_cleanup_completed_requests(dep, event, status);
 
 	if (dep->flags & DWC3_EP_END_TRANSFER_PENDING)
@@ -3299,6 +3313,9 @@ static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep,
 {
 	int status = 0;
 
+	if (!dep->endpoint.desc)
+		return;
+
 	if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
 		dwc3_gadget_endpoint_frame_from_event(dep, event);
 
@@ -3352,6 +3369,14 @@ static void dwc3_gadget_endpoint_command_complete(struct dwc3_ep *dep,
 	if (cmd != DWC3_DEPCMD_ENDTRANSFER)
 		return;
 
+	/*
+	 * The END_TRANSFER command will cause the controller to generate a
+	 * NoStream Event, and it's not due to the host DP NoStream rejection.
+	 * Ignore the next NoStream event.
+	 */
+	if (dep->stream_capable)
+		dep->flags |= DWC3_EP_IGNORE_NEXT_NOSTREAM;
+
 	dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
 	dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
 	dwc3_gadget_ep_cleanup_cancelled_requests(dep);
@@ -3574,14 +3599,6 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
 	WARN_ON_ONCE(ret);
 	dep->resource_index = 0;
 
-	/*
-	 * The END_TRANSFER command will cause the controller to generate a
-	 * NoStream Event, and it's not due to the host DP NoStream rejection.
-	 * Ignore the next NoStream event.
-	 */
-	if (dep->stream_capable)
-		dep->flags |= DWC3_EP_IGNORE_NEXT_NOSTREAM;
-
 	if (!interrupt)
 		dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
 	else

drivers/usb/gadget/udc/udc-xilinx.c

@@ -2136,7 +2136,7 @@ static int xudc_probe(struct platform_device *pdev)
 
 	ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (ret)
-		goto fail;
+		goto err_disable_unprepare_clk;
 
 	udc->dev = &udc->gadget.dev;
 
@@ -2155,6 +2155,9 @@ static int xudc_probe(struct platform_device *pdev)
 		 udc->dma_enabled ? "with DMA" : "without DMA");
 
 	return 0;
+
+err_disable_unprepare_clk:
+	clk_disable_unprepare(udc->clk);
 fail:
 	dev_err(&pdev->dev, "probe failed, %d\n", ret);
 	return ret;

drivers/usb/host/xhci-tegra.c

@@ -1400,6 +1400,7 @@ static void tegra_xusb_deinit_usb_phy(struct tegra_xusb *tegra)
 
 static int tegra_xusb_probe(struct platform_device *pdev)
 {
+	struct of_phandle_args args;
 	struct tegra_xusb *tegra;
 	struct device_node *np;
 	struct resource *regs;
@@ -1454,10 +1455,17 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 		goto put_padctl;
 	}
 
-	tegra->padctl_irq = of_irq_get(np, 0);
-	if (tegra->padctl_irq <= 0) {
-		err = (tegra->padctl_irq == 0) ? -ENODEV : tegra->padctl_irq;
-		goto put_padctl;
+	/* Older device-trees don't have padctrl interrupt */
+	err = of_irq_parse_one(np, 0, &args);
+	if (!err) {
+		tegra->padctl_irq = of_irq_get(np, 0);
+		if (tegra->padctl_irq <= 0) {
+			err = (tegra->padctl_irq == 0) ? -ENODEV : tegra->padctl_irq;
+			goto put_padctl;
+		}
+	} else {
+		dev_dbg(&pdev->dev,
+			"%pOF is missing an interrupt, disabling PM support\n", np);
 	}
 
 	tegra->host_clk = devm_clk_get(&pdev->dev, "xusb_host");
@@ -1696,11 +1704,15 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 		goto remove_usb3;
 	}
 
-	err = devm_request_threaded_irq(&pdev->dev, tegra->padctl_irq, NULL, tegra_xusb_padctl_irq,
-					IRQF_ONESHOT, dev_name(&pdev->dev), tegra);
-	if (err < 0) {
-		dev_err(&pdev->dev, "failed to request padctl IRQ: %d\n", err);
-		goto remove_usb3;
+	if (tegra->padctl_irq) {
+		err = devm_request_threaded_irq(&pdev->dev, tegra->padctl_irq,
+						NULL, tegra_xusb_padctl_irq,
+						IRQF_ONESHOT, dev_name(&pdev->dev),
+						tegra);
+		if (err < 0) {
+			dev_err(&pdev->dev, "failed to request padctl IRQ: %d\n", err);
+			goto remove_usb3;
+		}
 	}
 
 	err = tegra_xusb_enable_firmware_messages(tegra);
@@ -1718,13 +1730,16 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 	/* Enable wake for both USB 2.0 and USB 3.0 roothubs */
 	device_init_wakeup(&tegra->hcd->self.root_hub->dev, true);
 	device_init_wakeup(&xhci->shared_hcd->self.root_hub->dev, true);
-	device_init_wakeup(tegra->dev, true);
 
 	pm_runtime_use_autosuspend(tegra->dev);
 	pm_runtime_set_autosuspend_delay(tegra->dev, 2000);
 	pm_runtime_mark_last_busy(tegra->dev);
 	pm_runtime_set_active(tegra->dev);
-	pm_runtime_enable(tegra->dev);
+
+	if (tegra->padctl_irq) {
+		device_init_wakeup(tegra->dev, true);
+		pm_runtime_enable(tegra->dev);
+	}
 
 	return 0;
 
@@ -1772,7 +1787,9 @@ static int tegra_xusb_remove(struct platform_device *pdev)
 	dma_free_coherent(&pdev->dev, tegra->fw.size, tegra->fw.virt,
 			  tegra->fw.phys);
 
-	pm_runtime_disable(&pdev->dev);
+	if (tegra->padctl_irq)
+		pm_runtime_disable(&pdev->dev);
+
 	pm_runtime_put(&pdev->dev);
 
 	tegra_xusb_powergate_partitions(tegra);

drivers/usb/serial/option.c

@@ -1267,6 +1267,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010),				/* Telit SBL FN980 flashing device */
 	  .driver_info = NCTRL(0) | ZLP },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9200),				/* Telit LE910S1 flashing device */
+	  .driver_info = NCTRL(0) | ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) },
@@ -2094,6 +2096,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) },			/* Fibocom FM101-GL (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff),			/* Fibocom FM101-GL (laptop MBIM) */
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */

drivers/usb/serial/pl2303.c

@@ -432,6 +432,7 @@ static int pl2303_detect_type(struct usb_serial *serial)
 	case 0x200:
 		switch (bcdDevice) {
 		case 0x100:
+		case 0x105:
 		case 0x305:
 		case 0x405:
 			/*

drivers/usb/typec/tcpm/fusb302.c

@@ -669,25 +669,27 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
 					     FUSB_REG_MASK_BC_LVL |
 					     FUSB_REG_MASK_COMP_CHNG,
-					     FUSB_REG_MASK_COMP_CHNG);
+					     FUSB_REG_MASK_BC_LVL);
 		if (ret < 0) {
 			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
 				    ret);
 			goto done;
 		}
 		chip->intr_comp_chng = true;
+		chip->intr_bc_lvl = false;
 		break;
 	case TYPEC_CC_RD:
 		ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
 					     FUSB_REG_MASK_BC_LVL |
 					     FUSB_REG_MASK_COMP_CHNG,
-					     FUSB_REG_MASK_BC_LVL);
+					     FUSB_REG_MASK_COMP_CHNG);
 		if (ret < 0) {
 			fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
 				    ret);
 			goto done;
 		}
 		chip->intr_bc_lvl = true;
+		chip->intr_comp_chng = false;
 		break;
 	default:
 		break;

drivers/usb/typec/tipd/core.c

@@ -653,7 +653,7 @@ static int cd321x_switch_power_state(struct tps6598x *tps, u8 target_state)
 	if (state == target_state)
 		return 0;
 
-	ret = tps6598x_exec_cmd(tps, "SPSS", sizeof(u8), &target_state, 0, NULL);
+	ret = tps6598x_exec_cmd(tps, "SSPS", sizeof(u8), &target_state, 0, NULL);
 	if (ret)
 		return ret;
 
@@ -707,6 +707,7 @@ static int tps6598x_probe(struct i2c_client *client)
 	u32 conf;
 	u32 vid;
 	int ret;
+	u64 mask1;
 
 	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
 	if (!tps)
@@ -730,11 +731,6 @@ static int tps6598x_probe(struct i2c_client *client)
 	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 		tps->i2c_protocol = true;
 
-	/* Make sure the controller has application firmware running */
-	ret = tps6598x_check_mode(tps);
-	if (ret)
-		return ret;
-
 	if (np && of_device_is_compatible(np, "apple,cd321x")) {
 		/* Switch CD321X chips to the correct system power state */
 		ret = cd321x_switch_power_state(tps, TPS_SYSTEM_POWER_STATE_S0);
@@ -742,24 +738,27 @@ static int tps6598x_probe(struct i2c_client *client)
 			return ret;
 
 		/* CD321X chips have all interrupts masked initially */
-		ret = tps6598x_write64(tps, TPS_REG_INT_MASK1,
-					APPLE_CD_REG_INT_POWER_STATUS_UPDATE |
-					APPLE_CD_REG_INT_DATA_STATUS_UPDATE |
-					APPLE_CD_REG_INT_PLUG_EVENT);
-		if (ret)
-			return ret;
+		mask1 = APPLE_CD_REG_INT_POWER_STATUS_UPDATE |
+			APPLE_CD_REG_INT_DATA_STATUS_UPDATE |
+			APPLE_CD_REG_INT_PLUG_EVENT;
 
 		irq_handler = cd321x_interrupt;
 	} else {
 		/* Enable power status, data status and plug event interrupts */
-		ret = tps6598x_write64(tps, TPS_REG_INT_MASK1,
-				       TPS_REG_INT_POWER_STATUS_UPDATE |
-				       TPS_REG_INT_DATA_STATUS_UPDATE |
-				       TPS_REG_INT_PLUG_EVENT);
-		if (ret)
-			return ret;
+		mask1 = TPS_REG_INT_POWER_STATUS_UPDATE |
+			TPS_REG_INT_DATA_STATUS_UPDATE |
+			TPS_REG_INT_PLUG_EVENT;
 	}
 
+	/* Make sure the controller has application firmware running */
+	ret = tps6598x_check_mode(tps);
+	if (ret)
+		return ret;
+
+	ret = tps6598x_write64(tps, TPS_REG_INT_MASK1, mask1);
+	if (ret)
+		return ret;
+
 	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
 	if (ret < 0)
 		return ret;