Commit ba3980df authored by Qing Xu's avatar Qing Xu Committed by Samuel Ortiz

Documentation: Add docs for max8925 dt

add docs for dt of max8925-mfd, max8925-backlight, and
max8925-battery
Signed-off-by: default avatarQing Xu <qingx@marvell.com>
Signed-off-by: default avatarHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 58f1193e
* Maxim max8925 Power Management IC
Required parent device properties:
- compatible : "maxim,max8925"
- reg : the I2C slave address for the max8925 chip
- interrupts : IRQ line for the max8925 chip
- interrupt-controller: describes the max8925 as an interrupt
controller (has its own domain)
- #interrupt-cells : should be 1.
- The cell is the max8925 local IRQ number
Optional parent device properties:
- maxim,tsc-irq: there are 2 IRQ lines for max8925, one is indicated in
interrupts property, the other is indicated here.
max8925 consists of a large and varied group of sub-devices:
Device Supply Names Description
------ ------------ -----------
max8925-onkey : : On key
max8925-rtc : : RTC
max8925-regulator : : Regulators
max8925-backlight : : Backlight
max8925-touch : : Touchscreen
max8925-power : : Charger
Example:
pmic: max8925@3c {
compatible = "maxim,max8925";
reg = <0x3c>;
interrupts = <1>;
interrupt-parent = <&intcmux4>;
interrupt-controller;
#interrupt-cells = <1>;
maxim,tsc-irq = <0>;
regulators {
SDV1 {
regulator-min-microvolt = <637500>;
regulator-max-microvolt = <1425000>;
regulator-boot-on;
regulator-always-on;
};
LDO1 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <3900000>;
regulator-boot-on;
regulator-always-on;
};
};
backlight {
maxim,max8925-dual-string = <0>;
};
charger {
batt-detect = <0>;
topoff-threshold = <1>;
fast-charge = <7>;
no-temp-support = <0>;
no-insert-detect = <0>;
};
};
max8925-battery bindings
~~~~~~~~~~~~~~~~
Optional properties :
- batt-detect: whether support battery detect
- topoff-threshold: set charging current in topoff mode
- fast-charge: set charging current in fast mode
- no-temp-support: whether support temperature protection detect
- no-insert-detect: whether support insert detect
Example:
charger {
batt-detect = <0>;
topoff-threshold = <1>;
fast-charge = <7>;
no-temp-support = <0>;
no-insert-detect = <0>;
};
88pm860x-backlight bindings
Optional properties:
- maxim,max8925-dual-string: whether support dual string
Example:
backlights {
maxim,max8925-dual-string = <0>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment