scsi: lpfc: Fill in missing ndlp kref puts in error paths

Code review, following every lpfc_nlp_get() call vs calls during error
handling, discovered cases of missing put calls.

Correct by adding ndlp kref puts in the respective error paths.

Also added comments to several of the error paths to record relationships
to reference counts.

Link: https://lore.kernel.org/r/20220506035519.50908-3-jsmart2021@gmail.comCo-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/lpfc/lpfc_els.c

@@ -8725,19 +8725,18 @@ lpfc_issue_els_rrq(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	elsiocb->cmd_cmpl = lpfc_cmpl_els_rrq;
 
 	elsiocb->ndlp = lpfc_nlp_get(ndlp);
-	if (!elsiocb->ndlp) {
-		lpfc_els_free_iocb(phba, elsiocb);
-		return 1;
-	}
+	if (!elsiocb->ndlp)
+		goto io_err;
 
 	ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
-	if (ret == IOCB_ERROR)
+	if (ret == IOCB_ERROR) {
+		lpfc_nlp_put(ndlp);
 		goto io_err;
+	}
 	return 0;
 
  io_err:
 	lpfc_els_free_iocb(phba, elsiocb);
-	lpfc_nlp_put(ndlp);
 	return 1;
 }
 

drivers/scsi/lpfc/lpfc_nportdisc.c

@@ -513,6 +513,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			lpfc_config_link(phba, link_mbox);
 			link_mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 			link_mbox->vport = vport;
+
+			/* The default completion handling for CONFIG_LINK
+			 * does not require the ndlp so no reference is needed.
+			 */
 			link_mbox->ctx_ndlp = ndlp;
 
 			rc = lpfc_sli_issue_mbox(phba, link_mbox, MBX_NOWAIT);
@@ -633,6 +637,9 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	 */
 	login_mbox->mbox_cmpl = lpfc_defer_plogi_acc;
 	login_mbox->ctx_ndlp = lpfc_nlp_get(ndlp);
+	if (!login_mbox->ctx_ndlp)
+		goto out;
+
 	login_mbox->context3 = save_iocb; /* For PLOGI ACC */
 
 	spin_lock_irq(&ndlp->lock);
@@ -641,8 +648,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 
 	/* Start the ball rolling by issuing REG_LOGIN here */
 	rc = lpfc_sli_issue_mbox(phba, login_mbox, MBX_NOWAIT);
-	if (rc == MBX_NOT_FINISHED)
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_nlp_put(ndlp);
 		goto out;
+	}
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
 
 	return 1;
@@ -1099,8 +1108,10 @@ lpfc_release_rpi(struct lpfc_hba *phba, struct lpfc_vport *vport,
 				 ndlp->nlp_rpi, ndlp->nlp_DID, ndlp->nlp_flag);
 
 		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
-		if (rc == MBX_NOT_FINISHED)
+		if (rc == MBX_NOT_FINISHED) {
+			lpfc_nlp_put(ndlp);
 			mempool_free(pmb, phba->mbox_mem_pool);
+		}
 	}
 }
 

drivers/scsi/lpfc/lpfc_nvme.c

@@ -2357,6 +2357,11 @@ lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 		rpinfo.dev_loss_tmo = vport->cfg_devloss_tmo;
 
 	spin_lock_irq(&ndlp->lock);
+
+	/* If an oldrport exists, so does the ndlp reference.  If not
+	 * a new reference is needed because either the node has never
+	 * been registered or it's been unregistered and getting deleted.
+	 */
 	oldrport = lpfc_ndlp_get_nrport(ndlp);
 	if (oldrport) {
 		prev_ndlp = oldrport->ndlp;

drivers/scsi/lpfc/lpfc_sli.c

@@ -20684,8 +20684,12 @@ lpfc_cleanup_pending_mbox(struct lpfc_vport *vport)
 			mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
 			act_mbx_ndlp = (struct lpfc_nodelist *)mb->ctx_ndlp;
-			/* Put reference count for delayed processing */
+
+			/* This reference is local to this routine.  The
+			 * reference is removed at routine exit.
+			 */
 			act_mbx_ndlp = lpfc_nlp_get(act_mbx_ndlp);
+
 			/* Unregister the RPI when mailbox complete */
 			mb->mbox_flag |= LPFC_MBX_IMED_UNREG;
 		}