Commit ba578afd authored by Chiawen Huang's avatar Chiawen Huang Committed by Alex Deucher

drm/amd/display: disable stream if pixel clock changed with link active

[Why]
Vbios uses preferred timing to turn on edp but OS could use other
timing. If change pixel clock when link active, there is unexpected
garbage on monitor.

[How]
Once pixel clock changed, the driver needs to disable stream.
Signed-off-by: default avatarChiawen Huang <chiawen.huang@amd.com>
Reviewed-by: default avatarTony Cheng <Tony.Cheng@amd.com>
Acked-by: default avatarRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 89b151ad
...@@ -842,6 +842,61 @@ static void disable_dangling_plane(struct dc *dc, struct dc_state *context) ...@@ -842,6 +842,61 @@ static void disable_dangling_plane(struct dc *dc, struct dc_state *context)
dc_release_state(current_ctx); dc_release_state(current_ctx);
} }
static void disable_vbios_mode_if_required(
struct dc *dc,
struct dc_state *context)
{
unsigned int i;
/* check if timing_changed, disable stream*/
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct dc_stream_state *stream = NULL;
struct dc_link *link = NULL;
struct pipe_ctx *pipe = NULL;
pipe = &context->res_ctx.pipe_ctx[i];
stream = pipe->stream;
if (stream == NULL)
continue;
if (stream->link->local_sink &&
stream->link->local_sink->sink_signal == SIGNAL_TYPE_EDP) {
link = stream->link;
break;
}
if (link != NULL) {
unsigned int enc_inst, tg_inst = 0;
unsigned int pix_clk_100hz;
enc_inst = link->link_enc->funcs->get_dig_frontend(link->link_enc);
if (enc_inst != ENGINE_ID_UNKNOWN) {
for (i = 0; i < dc->res_pool->stream_enc_count; i++) {
if (dc->res_pool->stream_enc[i]->id == enc_inst) {
tg_inst = dc->res_pool->stream_enc[i]->funcs->dig_source_otg(
dc->res_pool->stream_enc[i]);
break;
}
}
dc->res_pool->dp_clock_source->funcs->get_pixel_clk_frequency_100hz(
dc->res_pool->dp_clock_source,
tg_inst, &pix_clk_100hz);
if (link->link_status.link_active) {
uint32_t requested_pix_clk_100hz =
pipe->stream_res.pix_clk_params.requested_pix_clk_100hz;
if (pix_clk_100hz != requested_pix_clk_100hz) {
core_link_disable_stream(pipe);
pipe->stream->dpms_off = false;
}
}
}
}
}
}
static void wait_for_no_pipes_pending(struct dc *dc, struct dc_state *context) static void wait_for_no_pipes_pending(struct dc *dc, struct dc_state *context)
{ {
int i; int i;
...@@ -1278,13 +1333,14 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c ...@@ -1278,13 +1333,14 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c
for (i = 0; i < context->stream_count; i++) for (i = 0; i < context->stream_count; i++)
dc_streams[i] = context->streams[i]; dc_streams[i] = context->streams[i];
if (!dcb->funcs->is_accelerated_mode(dcb)) if (!dcb->funcs->is_accelerated_mode(dcb)) {
disable_vbios_mode_if_required(dc, context);
dc->hwss.enable_accelerated_mode(dc, context); dc->hwss.enable_accelerated_mode(dc, context);
}
for (i = 0; i < context->stream_count; i++) { for (i = 0; i < context->stream_count; i++)
if (context->streams[i]->apply_seamless_boot_optimization) if (context->streams[i]->apply_seamless_boot_optimization)
dc->optimize_seamless_boot_streams++; dc->optimize_seamless_boot_streams++;
}
if (context->stream_count > dc->optimize_seamless_boot_streams || if (context->stream_count > dc->optimize_seamless_boot_streams ||
context->stream_count == 0) context->stream_count == 0)
......
...@@ -1654,7 +1654,7 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) ...@@ -1654,7 +1654,7 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context)
// enable fastboot if backend is enabled on eDP // enable fastboot if backend is enabled on eDP
if (edp_link->link_enc->funcs->is_dig_enabled(edp_link->link_enc)) { if (edp_link->link_enc->funcs->is_dig_enabled(edp_link->link_enc)) {
/* Set optimization flag on eDP stream*/ /* Set optimization flag on eDP stream*/
if (edp_stream) { if (edp_stream && edp_link->link_status.link_active) {
edp_stream->apply_edp_fast_boot_optimization = true; edp_stream->apply_edp_fast_boot_optimization = true;
can_apply_edp_fast_boot = true; can_apply_edp_fast_boot = true;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment