can: m_can: Move hrtimer init to m_can_class_register

The hrtimer_init() is called in m_can_plat_probe() and the hrtimer
function is set in m_can_class_register(). For readability it is better
to keep these two together in m_can_class_register().

Cc: Judith Mendez <jm@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240207093220.2681425-3-msp@baylibre.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/m_can/m_can.c

@@ -2070,8 +2070,12 @@ int m_can_class_register(struct m_can_classdev *cdev)
 			goto clk_disable;
 	}
 
-	if (!cdev->net->irq)
+	if (!cdev->net->irq) {
+		dev_dbg(cdev->dev, "Polling enabled, initialize hrtimer");
+		hrtimer_init(&cdev->hrtimer, CLOCK_MONOTONIC,
+			     HRTIMER_MODE_REL_PINNED);
 		cdev->hrtimer.function = &hrtimer_callback;
+	}
 
 	ret = m_can_dev_setup(cdev);
 	if (ret)

drivers/net/can/m_can/m_can_platform.c

@@ -109,10 +109,6 @@ static int m_can_plat_probe(struct platform_device *pdev)
 			ret = irq;
 			goto probe_fail;
 		}
-	} else {
-		dev_dbg(mcan_class->dev, "Polling enabled, initialize hrtimer");
-		hrtimer_init(&mcan_class->hrtimer, CLOCK_MONOTONIC,
-			     HRTIMER_MODE_REL_PINNED);
 	}
 
 	/* message ram could be shared */