ARM: dts: at91: at91sam9x5dm.dtsi: Style cleanup

- use tags from included dtsi instead of duplicating the hierarchy

There are no differences in the generated .dtbs
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20190812212757.23432-9-uwe@kleine-koenig.orgSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

arch/arm/boot/dts/at91sam9x5dm.dtsi

@@ -9,51 +9,6 @@
  */
 
 / {
-	ahb {
-		apb {
-			i2c0: i2c@f8010000 {
-				qt1070: keyboard@1b {
-					compatible = "qt1070";
-					reg = <0x1b>;
-					interrupt-parent = <&pioA>;
-					interrupts = <7 0x0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_qt1070_irq>;
-					wakeup-source;
-				};
-			};
-
-			hlcdc: hlcdc@f8038000 {
-				hlcdc-display-controller {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-
-					port@0 {
-						hlcdc_panel_output: endpoint@0 {
-							reg = <0>;
-							remote-endpoint = <&panel_input>;
-						};
-					};
-				};
-			};
-
-			adc0: adc@f804c000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				board {
-					pinctrl_qt1070_irq: qt1070_irq {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-				};
-			};
-		};
-	};
-
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&hlcdc_pwm 0 50000 0>;
@@ -98,3 +53,44 @@ panel_reg: panel_regulator {
 		status = "disabled";
 	};
 };
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&i2c0 {
+	keyboard@1b {
+		compatible = "qt1070";
+		reg = <0x1b>;
+		interrupt-parent = <&pioA>;
+		interrupts = <7 0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qt1070_irq>;
+		wakeup-source;
+	};
+};
+
+&hlcdc {
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_qt1070_irq: qt1070_irq {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};