Commit bb446b57 authored by Markus Mayer's avatar Markus Mayer Committed by Rafael J. Wysocki

dt: cpufreq: brcm: New binding document for brcmstb-avs-cpufreq

Add the binding document for the new brcmstb-avs-cpufreq driver.
Signed-off-by: default avatarMarkus Mayer <mmayer@broadcom.com>
Acked-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent 1758b337
Broadcom AVS mail box and interrupt register bindings
=====================================================
A total of three DT nodes are required. One node (brcm,avs-cpu-data-mem)
references the mailbox register used to communicate with the AVS CPU[1]. The
second node (brcm,avs-cpu-l2-intr) is required to trigger an interrupt on
the AVS CPU. The interrupt tells the AVS CPU that it needs to process a
command sent to it by a driver. Interrupting the AVS CPU is mandatory for
commands to be processed.
The interface also requires a reference to the AVS host interrupt controller,
so a driver can react to interrupts generated by the AVS CPU whenever a command
has been processed. See [2] for more information on the brcm,l2-intc node.
[1] The AVS CPU is an independent co-processor that runs proprietary
firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
Adaptive Voltage Scaling.
[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
Node brcm,avs-cpu-data-mem
--------------------------
Required properties:
- compatible: must include: brcm,avs-cpu-data-mem and
should include: one of brcm,bcm7271-avs-cpu-data-mem or
brcm,bcm7268-avs-cpu-data-mem
- reg: Specifies base physical address and size of the registers.
- interrupts: The interrupt that the AVS CPU will use to interrupt the host
when a command completed.
- interrupt-parent: The interrupt controller the above interrupt is routed
through.
- interrupt-names: The name of the interrupt used to interrupt the host.
Optional properties:
- None
Node brcm,avs-cpu-l2-intr
-------------------------
Required properties:
- compatible: must include: brcm,avs-cpu-l2-intr and
should include: one of brcm,bcm7271-avs-cpu-l2-intr or
brcm,bcm7268-avs-cpu-l2-intr
- reg: Specifies base physical address and size of the registers.
Optional properties:
- None
Example
=======
avs_host_l2_intc: interrupt-controller@f04d1200 {
#interrupt-cells = <1>;
compatible = "brcm,l2-intc";
interrupt-parent = <&intc>;
reg = <0xf04d1200 0x48>;
interrupt-controller;
interrupts = <0x0 0x19 0x0>;
interrupt-names = "avs";
};
avs-cpu-data-mem@f04c4000 {
compatible = "brcm,bcm7271-avs-cpu-data-mem",
"brcm,avs-cpu-data-mem";
reg = <0xf04c4000 0x60>;
interrupts = <0x1a>;
interrupt-parent = <&avs_host_l2_intc>;
interrupt-names = "sw_intr";
};
avs-cpu-l2-intr@f04d1100 {
compatible = "brcm,bcm7271-avs-cpu-l2-intr",
"brcm,avs-cpu-l2-intr";
reg = <0xf04d1100 0x10>;
};
......@@ -2738,6 +2738,13 @@ L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/mtd/nand/brcmnand/
BROADCOM STB AVS CPUFREQ DRIVER
M: Markus Mayer <mmayer@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
L: linux-pm@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
BROADCOM SPECIFIC AMBA DRIVER (BCMA)
M: Rafał Miłecki <zajec5@gmail.com>
L: linux-wireless@vger.kernel.org
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment