natsemi: macsonic: use eth_hw_addr_set()

Byte by byte assignments.

Fixes build on m68k.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/natsemi/macsonic.c

@@ -203,6 +203,7 @@ static void mac_onboard_sonic_ethernet_addr(struct net_device *dev)
 	struct sonic_local *lp = netdev_priv(dev);
 	const int prom_addr = ONBOARD_SONIC_PROM_BASE;
 	unsigned short val;
+	u8 addr[ETH_ALEN];
 
 	/*
 	 * On NuBus boards we can sometimes look in the ROM resources.
@@ -213,7 +214,8 @@ static void mac_onboard_sonic_ethernet_addr(struct net_device *dev)
 		int i;
 
 		for (i = 0; i < 6; i++)
-			dev->dev_addr[i] = SONIC_READ_PROM(i);
+			addr[i] = SONIC_READ_PROM(i);
+		eth_hw_addr_set(dev, addr);
 		if (!INVALID_MAC(dev->dev_addr))
 			return;
 
@@ -222,7 +224,8 @@ static void mac_onboard_sonic_ethernet_addr(struct net_device *dev)
 		 * source has a rather long and detailed historical account of
 		 * why this is so.
 		 */
-		bit_reverse_addr(dev->dev_addr);
+		bit_reverse_addr(addr);
+		eth_hw_addr_set(dev, addr);
 		if (!INVALID_MAC(dev->dev_addr))
 			return;
 
@@ -243,14 +246,15 @@ static void mac_onboard_sonic_ethernet_addr(struct net_device *dev)
 	SONIC_WRITE(SONIC_CEP, 15);
 
 	val = SONIC_READ(SONIC_CAP2);
-	dev->dev_addr[5] = val >> 8;
-	dev->dev_addr[4] = val & 0xff;
+	addr[5] = val >> 8;
+	addr[4] = val & 0xff;
 	val = SONIC_READ(SONIC_CAP1);
-	dev->dev_addr[3] = val >> 8;
-	dev->dev_addr[2] = val & 0xff;
+	addr[3] = val >> 8;
+	addr[2] = val & 0xff;
 	val = SONIC_READ(SONIC_CAP0);
-	dev->dev_addr[1] = val >> 8;
-	dev->dev_addr[0] = val & 0xff;
+	addr[1] = val >> 8;
+	addr[0] = val & 0xff;
+	eth_hw_addr_set(dev, addr);
 
 	if (!INVALID_MAC(dev->dev_addr))
 		return;
@@ -355,13 +359,16 @@ static int mac_onboard_sonic_probe(struct net_device *dev)
 static int mac_sonic_nubus_ethernet_addr(struct net_device *dev,
 					 unsigned long prom_addr, int id)
 {
+	u8 addr[ETH_ALEN];
 	int i;
+
 	for(i = 0; i < 6; i++)
-		dev->dev_addr[i] = SONIC_READ_PROM(i);
+		addr[i] = SONIC_READ_PROM(i);
 
 	/* Some of the addresses are bit-reversed */
 	if (id != MACSONIC_DAYNA)
-		bit_reverse_addr(dev->dev_addr);
+		bit_reverse_addr(addr);
+	eth_hw_addr_set(dev, addr);
 
 	return 0;
 }