Merge branch 'timers-core-for-linus' of...

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimers: fix warning in kernel/hrtimer.c
  x86: make sure we really have an hpet mapping before using it
  x86: enable HPET on Fujitsu u9200
  linux/timex.h: cleanup for userspace
  posix-timers: simplify de_thread()->exit_itimers() path
  posix-timers: check ->it_signal instead of ->it_pid to validate the timer
  posix-timers: use "struct pid*" instead of "struct task_struct*"
  nohz: suppress needless timer reprogramming
  clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI
  nohz: no softirq pending warnings for offline cpus
  hrtimer: removing all ur callback modes, fix
  hrtimer: removing all ur callback modes, fix hotplug
  hrtimer: removing all ur callback modes
  x86: correct link to HPET timer specification
  rtc-cmos: export second NVRAM bank

Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c
manually.

arch/x86/Kconfig

@@ -479,7 +479,7 @@ config HPET_TIMER
          The HPET provides a stable time base on SMP
          systems, unlike the TSC, but it is more expensive to access,
          as it is off-chip.  You can find the HPET spec at
-         <http://www.intel.com/hardwaredesign/hpetspec.htm>.
+         <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
 
          You can safely choose Y here.  However, HPET will only be
          activated if the platform and the BIOS support this feature.

arch/x86/kernel/hpet.c

@@ -813,7 +813,7 @@ int __init hpet_enable(void)
 
 out_nohpet:
 	hpet_clear_mapping();
-	boot_hpet_disable = 1;
+	hpet_address = 0;
 	return 0;
 }
 
@@ -836,10 +836,11 @@ static __init int hpet_late_init(void)
 
 		hpet_address = force_hpet_address;
 		hpet_enable();
-		if (!hpet_virt_address)
-			return -ENODEV;
 	}
 
+	if (!hpet_virt_address)
+		return -ENODEV;
+
 	hpet_reserve_platform_timers(hpet_readl(HPET_ID));
 
 	for_each_online_cpu(cpu) {

arch/x86/kernel/quirks.c

@@ -168,6 +168,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
 			 ich_force_enable_hpet);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
 			 ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4,
+			 ich_force_enable_hpet);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
 			 ich_force_enable_hpet);
 

drivers/char/hpet.c

@@ -46,7 +46,7 @@
 /*
  * The High Precision Event Timer driver.
  * This driver is closely modelled after the rtc.c driver.
- * http://www.intel.com/hardwaredesign/hpetspec.htm
+ * http://www.intel.com/hardwaredesign/hpetspec_1.pdf
  */
 #define	HPET_USER_FREQ	(64)
 #define	HPET_DRIFT	(500)

drivers/clocksource/acpi_pm.c

@@ -57,11 +57,6 @@ u32 acpi_pm_read_verified(void)
 	return v2;
 }
 
-static cycle_t acpi_pm_read_slow(void)
-{
-	return (cycle_t)acpi_pm_read_verified();
-}
-
 static cycle_t acpi_pm_read(void)
 {
 	return (cycle_t)read_pmtmr();
@@ -88,6 +83,11 @@ static int __init acpi_pm_good_setup(char *__str)
 }
 __setup("acpi_pm_good", acpi_pm_good_setup);
 
+static cycle_t acpi_pm_read_slow(void)
+{
+	return (cycle_t)acpi_pm_read_verified();
+}
+
 static inline void acpi_pm_need_workaround(void)
 {
 	clocksource_acpi_pm.read = acpi_pm_read_slow;

drivers/input/touchscreen/ads7846.c

@@ -697,7 +697,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 	struct ads7846	*ts = container_of(handle, struct ads7846, timer);
 	int		status = 0;
 
-	spin_lock_irq(&ts->lock);
+	spin_lock(&ts->lock);
 
 	if (unlikely(!get_pendown_state(ts) ||
 		     device_suspended(&ts->spi->dev))) {
@@ -728,7 +728,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 			dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
 	}
 
-	spin_unlock_irq(&ts->lock);
+	spin_unlock(&ts->lock);
 	return HRTIMER_NORESTART;
 }
 

fs/exec.c

@@ -773,7 +773,6 @@ static int de_thread(struct task_struct *tsk)
 	struct signal_struct *sig = tsk->signal;
 	struct sighand_struct *oldsighand = tsk->sighand;
 	spinlock_t *lock = &oldsighand->siglock;
-	struct task_struct *leader = NULL;
 	int count;
 
 	if (thread_group_empty(tsk))
@@ -811,7 +810,7 @@ static int de_thread(struct task_struct *tsk)
 	 * and to assume its PID:
 	 */
 	if (!thread_group_leader(tsk)) {
-		leader = tsk->group_leader;
+		struct task_struct *leader = tsk->group_leader;
 
 		sig->notify_count = -1;	/* for exit_notify() */
 		for (;;) {
@@ -863,8 +862,9 @@ static int de_thread(struct task_struct *tsk)
 
 		BUG_ON(leader->exit_state != EXIT_ZOMBIE);
 		leader->exit_state = EXIT_DEAD;
-
 		write_unlock_irq(&tasklist_lock);
+
+		release_task(leader);
 	}
 
 	sig->group_exit_task = NULL;
@@ -873,8 +873,6 @@ static int de_thread(struct task_struct *tsk)
 no_thread_group:
 	exit_itimers(sig);
 	flush_itimer_signals();
-	if (leader)
-		release_task(leader);
 
 	if (atomic_read(&oldsighand->count) != 1) {
 		struct sighand_struct *newsighand;

include/linux/hrtimer.h

@@ -42,26 +42,6 @@ enum hrtimer_restart {
 	HRTIMER_RESTART,	/* Timer must be restarted */
 };
 
-/*
- * hrtimer callback modes:
- *
- *	HRTIMER_CB_SOFTIRQ:		Callback must run in softirq context
- *	HRTIMER_CB_IRQSAFE_PERCPU:	Callback must run in hardirq context
- *					Special mode for tick emulation and
- *					scheduler timer. Such timers are per
- *					cpu and not allowed to be migrated on
- *					cpu unplug.
- *	HRTIMER_CB_IRQSAFE_UNLOCKED:	Callback should run in hardirq context
- *					with timer->base lock unlocked
- *					used for timers which call wakeup to
- *					avoid lock order problems with rq->lock
- */
-enum hrtimer_cb_mode {
-	HRTIMER_CB_SOFTIRQ,
-	HRTIMER_CB_IRQSAFE_PERCPU,
-	HRTIMER_CB_IRQSAFE_UNLOCKED,
-};
-
 /*
  * Values to track state of the timer
  *
@@ -70,7 +50,6 @@ enum hrtimer_cb_mode {
  * 0x00		inactive
  * 0x01		enqueued into rbtree
  * 0x02		callback function running
- * 0x04		callback pending (high resolution mode)
  *
  * Special cases:
  * 0x03		callback function running and enqueued
@@ -92,8 +71,7 @@ enum hrtimer_cb_mode {
 #define HRTIMER_STATE_INACTIVE	0x00
 #define HRTIMER_STATE_ENQUEUED	0x01
 #define HRTIMER_STATE_CALLBACK	0x02
-#define HRTIMER_STATE_PENDING	0x04
-#define HRTIMER_STATE_MIGRATE	0x08
+#define HRTIMER_STATE_MIGRATE	0x04
 
 /**
  * struct hrtimer - the basic hrtimer structure
@@ -109,8 +87,6 @@ enum hrtimer_cb_mode {
  * @function:	timer expiry callback function
  * @base:	pointer to the timer base (per cpu and per clock)
  * @state:	state information (See bit values above)
- * @cb_mode:	high resolution timer feature to select the callback execution
- *		 mode
  * @cb_entry:	list head to enqueue an expired timer into the callback list
  * @start_site:	timer statistics field to store the site where the timer
  *		was started
@@ -129,7 +105,6 @@ struct hrtimer {
 	struct hrtimer_clock_base	*base;
 	unsigned long			state;
 	struct list_head		cb_entry;
-	enum hrtimer_cb_mode		cb_mode;
 #ifdef CONFIG_TIMER_STATS
 	int				start_pid;
 	void				*start_site;
@@ -188,15 +163,11 @@ struct hrtimer_clock_base {
  * @check_clocks:	Indictator, when set evaluate time source and clock
  *			event devices whether high resolution mode can be
  *			activated.
- * @cb_pending:		Expired timers are moved from the rbtree to this
- *			list in the timer interrupt. The list is processed
- *			in the softirq.
  * @nr_events:		Total number of timer interrupt events
  */
 struct hrtimer_cpu_base {
 	spinlock_t			lock;
 	struct hrtimer_clock_base	clock_base[HRTIMER_MAX_CLOCK_BASES];
-	struct list_head		cb_pending;
 #ifdef CONFIG_HIGH_RES_TIMERS
 	ktime_t				expires_next;
 	int				hres_active;
@@ -404,8 +375,7 @@ static inline int hrtimer_active(const struct hrtimer *timer)
  */
 static inline int hrtimer_is_queued(struct hrtimer *timer)
 {
-	return timer->state &
-		(HRTIMER_STATE_ENQUEUED | HRTIMER_STATE_PENDING);
+	return timer->state & HRTIMER_STATE_ENQUEUED;
 }
 
 /*

include/linux/interrupt.h

@@ -251,9 +251,6 @@ enum
 	BLOCK_SOFTIRQ,
 	TASKLET_SOFTIRQ,
 	SCHED_SOFTIRQ,
-#ifdef CONFIG_HIGH_RES_TIMERS
-	HRTIMER_SOFTIRQ,
-#endif
 	RCU_SOFTIRQ, 	/* Preferable RCU should always be the last softirq */
 
 	NR_SOFTIRQS

include/linux/posix-timers.h

@@ -45,7 +45,11 @@ struct k_itimer {
 	int it_requeue_pending;		/* waiting to requeue this timer */
 #define REQUEUE_PENDING 1
 	int it_sigev_notify;		/* notify word of sigevent struct */
-	struct task_struct *it_process;	/* process to send signal to */
+	struct signal_struct *it_signal;
+	union {
+		struct pid *it_pid;	/* pid of process to send signal to */
+		struct task_struct *it_process;	/* for clock_nanosleep */
+	};
 	struct sigqueue *sigq;		/* signal queue entry. */
 	union {
 		struct {

include/linux/timex.h

@@ -53,46 +53,10 @@
 #ifndef _LINUX_TIMEX_H
 #define _LINUX_TIMEX_H
 
-#include <linux/compiler.h>
 #include <linux/time.h>
 
-#include <asm/param.h>
-
 #define NTP_API		4	/* NTP API version */
 
-/*
- * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
- * for a slightly underdamped convergence characteristic. SHIFT_KH
- * establishes the damping of the FLL and is chosen by wisdom and black
- * art.
- *
- * MAXTC establishes the maximum time constant of the PLL. With the
- * SHIFT_KG and SHIFT_KF values given and a time constant range from
- * zero to MAXTC, the PLL will converge in 15 minutes to 16 hours,
- * respectively.
- */
-#define SHIFT_PLL	4	/* PLL frequency factor (shift) */
-#define SHIFT_FLL	2	/* FLL frequency factor (shift) */
-#define MAXTC		10	/* maximum time constant (shift) */
-
-/*
- * SHIFT_USEC defines the scaling (shift) of the time_freq and
- * time_tolerance variables, which represent the current frequency
- * offset and maximum frequency tolerance.
- */
-#define SHIFT_USEC 16		/* frequency offset scale (shift) */
-#define PPM_SCALE (NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC))
-#define PPM_SCALE_INV_SHIFT 19
-#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
-		       PPM_SCALE + 1)
-
-#define MAXPHASE 500000000l	/* max phase error (ns) */
-#define MAXFREQ 500000		/* max frequency error (ns/s) */
-#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT)
-#define MINSEC 256		/* min interval between updates (s) */
-#define MAXSEC 2048		/* max interval between updates (s) */
-#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */
-
 /*
  * syscall interface - used (mainly by NTP daemon)
  * to discipline kernel clock oscillator
@@ -199,8 +163,45 @@ struct timex {
 #define TIME_BAD	TIME_ERROR /* bw compat */
 
 #ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/param.h>
+
 #include <asm/timex.h>
 
+/*
+ * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
+ * for a slightly underdamped convergence characteristic. SHIFT_KH
+ * establishes the damping of the FLL and is chosen by wisdom and black
+ * art.
+ *
+ * MAXTC establishes the maximum time constant of the PLL. With the
+ * SHIFT_KG and SHIFT_KF values given and a time constant range from
+ * zero to MAXTC, the PLL will converge in 15 minutes to 16 hours,
+ * respectively.
+ */
+#define SHIFT_PLL	4	/* PLL frequency factor (shift) */
+#define SHIFT_FLL	2	/* FLL frequency factor (shift) */
+#define MAXTC		10	/* maximum time constant (shift) */
+
+/*
+ * SHIFT_USEC defines the scaling (shift) of the time_freq and
+ * time_tolerance variables, which represent the current frequency
+ * offset and maximum frequency tolerance.
+ */
+#define SHIFT_USEC 16		/* frequency offset scale (shift) */
+#define PPM_SCALE (NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC))
+#define PPM_SCALE_INV_SHIFT 19
+#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
+		       PPM_SCALE + 1)
+
+#define MAXPHASE 500000000l	/* max phase error (ns) */
+#define MAXFREQ 500000		/* max frequency error (ns/s) */
+#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT)
+#define MINSEC 256		/* min interval between updates (s) */
+#define MAXSEC 2048		/* max interval between updates (s) */
+#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */
+
 /*
  * kernel variables
  * Note: maximum error = NTP synch distance = dispersion + delay / 2;

kernel/posix-timers.c

@@ -116,7 +116,7 @@ static DEFINE_SPINLOCK(idr_lock);
  *	    must supply functions here, even if the function just returns
  *	    ENOSYS.  The standard POSIX timer management code assumes the
  *	    following: 1.) The k_itimer struct (sched.h) is used for the
- *	    timer.  2.) The list, it_lock, it_clock, it_id and it_process
+ *	    timer.  2.) The list, it_lock, it_clock, it_id and it_pid
  *	    fields are not modified by timer code.
  *
  *          At this time all functions EXCEPT clock_nanosleep can be
@@ -319,7 +319,8 @@ void do_schedule_next_timer(struct siginfo *info)
 
 int posix_timer_event(struct k_itimer *timr, int si_private)
 {
-	int shared, ret;
+	struct task_struct *task;
+	int shared, ret = -1;
 	/*
 	 * FIXME: if ->sigq is queued we can race with
 	 * dequeue_signal()->do_schedule_next_timer().
@@ -333,8 +334,13 @@ int posix_timer_event(struct k_itimer *timr, int si_private)
 	 */
 	timr->sigq->info.si_sys_private = si_private;
 
-	shared = !(timr->it_sigev_notify & SIGEV_THREAD_ID);
-	ret = send_sigqueue(timr->sigq, timr->it_process, shared);
+	rcu_read_lock();
+	task = pid_task(timr->it_pid, PIDTYPE_PID);
+	if (task) {
+		shared = !(timr->it_sigev_notify & SIGEV_THREAD_ID);
+		ret = send_sigqueue(timr->sigq, task, shared);
+	}
+	rcu_read_unlock();
 	/* If we failed to send the signal the timer stops. */
 	return ret > 0;
 }
@@ -411,7 +417,7 @@ static enum hrtimer_restart posix_timer_fn(struct hrtimer *timer)
 	return ret;
 }
 
-static struct task_struct * good_sigevent(sigevent_t * event)
+static struct pid *good_sigevent(sigevent_t * event)
 {
 	struct task_struct *rtn = current->group_leader;
 
@@ -425,7 +431,7 @@ static struct task_struct * good_sigevent(sigevent_t * event)
 	    ((event->sigev_signo <= 0) || (event->sigev_signo > SIGRTMAX)))
 		return NULL;
 
-	return rtn;
+	return task_pid(rtn);
 }
 
 void register_posix_clock(const clockid_t clock_id, struct k_clock *new_clock)
@@ -464,6 +470,7 @@ static void release_posix_timer(struct k_itimer *tmr, int it_id_set)
 		idr_remove(&posix_timers_id, tmr->it_id);
 		spin_unlock_irqrestore(&idr_lock, flags);
 	}
+	put_pid(tmr->it_pid);
 	sigqueue_free(tmr->sigq);
 	kmem_cache_free(posix_timers_cache, tmr);
 }
@@ -477,7 +484,6 @@ sys_timer_create(const clockid_t which_clock,
 {
 	struct k_itimer *new_timer;
 	int error, new_timer_id;
-	struct task_struct *process;
 	sigevent_t event;
 	int it_id_set = IT_ID_NOT_SET;
 
@@ -531,11 +537,9 @@ sys_timer_create(const clockid_t which_clock,
 			goto out;
 		}
 		rcu_read_lock();
-		process = good_sigevent(&event);
-		if (process)
-			get_task_struct(process);
+		new_timer->it_pid = get_pid(good_sigevent(&event));
 		rcu_read_unlock();
-		if (!process) {
+		if (!new_timer->it_pid) {
 			error = -EINVAL;
 			goto out;
 		}
@@ -543,8 +547,7 @@ sys_timer_create(const clockid_t which_clock,
 		event.sigev_notify = SIGEV_SIGNAL;
 		event.sigev_signo = SIGALRM;
 		event.sigev_value.sival_int = new_timer->it_id;
-		process = current->group_leader;
-		get_task_struct(process);
+		new_timer->it_pid = get_pid(task_tgid(current));
 	}
 
 	new_timer->it_sigev_notify     = event.sigev_notify;
@@ -554,7 +557,7 @@ sys_timer_create(const clockid_t which_clock,
 	new_timer->sigq->info.si_code  = SI_TIMER;
 
 	spin_lock_irq(&current->sighand->siglock);
-	new_timer->it_process = process;
+	new_timer->it_signal = current->signal;
 	list_add(&new_timer->list, &current->signal->posix_timers);
 	spin_unlock_irq(&current->sighand->siglock);
 
@@ -589,8 +592,7 @@ static struct k_itimer *lock_timer(timer_t timer_id, unsigned long *flags)
 	timr = idr_find(&posix_timers_id, (int)timer_id);
 	if (timr) {
 		spin_lock(&timr->it_lock);
-		if (timr->it_process &&
-		    same_thread_group(timr->it_process, current)) {
+		if (timr->it_signal == current->signal) {
 			spin_unlock(&idr_lock);
 			return timr;
 		}
@@ -837,8 +839,7 @@ sys_timer_delete(timer_t timer_id)
 	 * This keeps any tasks waiting on the spin lock from thinking
 	 * they got something (see the lock code above).
 	 */
-	put_task_struct(timer->it_process);
-	timer->it_process = NULL;
+	timer->it_signal = NULL;
 
 	unlock_timer(timer, flags);
 	release_posix_timer(timer, IT_ID_SET);
@@ -864,8 +865,7 @@ static void itimer_delete(struct k_itimer *timer)
 	 * This keeps any tasks waiting on the spin lock from thinking
 	 * they got something (see the lock code above).
 	 */
-	put_task_struct(timer->it_process);
-	timer->it_process = NULL;
+	timer->it_signal = NULL;
 
 	unlock_timer(timer, flags);
 	release_posix_timer(timer, IT_ID_SET);

kernel/sched.c

@@ -209,7 +209,6 @@ void init_rt_bandwidth(struct rt_bandwidth *rt_b, u64 period, u64 runtime)
 	hrtimer_init(&rt_b->rt_period_timer,
 			CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	rt_b->rt_period_timer.function = sched_rt_period_timer;
-	rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
 }
 
 static inline int rt_bandwidth_enabled(void)
@@ -1139,7 +1138,6 @@ static void init_rq_hrtick(struct rq *rq)
 
 	hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	rq->hrtick_timer.function = hrtick;
-	rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
 }
 #else	/* CONFIG_SCHED_HRTICK */
 static inline void hrtick_clear(struct rq *rq)

kernel/time/ntp.c

@@ -131,7 +131,7 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
 {
 	enum hrtimer_restart res = HRTIMER_NORESTART;
 
-	write_seqlock_irq(&xtime_lock);
+	write_seqlock(&xtime_lock);
 
 	switch (time_state) {
 	case TIME_OK:
@@ -164,7 +164,7 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer)
 	}
 	update_vsyscall(&xtime, clock);
 
-	write_sequnlock_irq(&xtime_lock);
+	write_sequnlock(&xtime_lock);
 
 	return res;
 }

kernel/time/tick-sched.c

@@ -247,7 +247,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 	if (need_resched())
 		goto end;
 
-	if (unlikely(local_softirq_pending())) {
+	if (unlikely(local_softirq_pending() && cpu_online(cpu))) {
 		static int ratelimit;
 
 		if (ratelimit < 10) {
@@ -282,8 +282,31 @@ void tick_nohz_stop_sched_tick(int inidle)
 	/* Schedule the tick, if we are at least one jiffie off */
 	if ((long)delta_jiffies >= 1) {
 
+		/*
+		* calculate the expiry time for the next timer wheel
+		* timer
+		*/
+		expires = ktime_add_ns(last_update, tick_period.tv64 *
+				   delta_jiffies);
+
+		/*
+		 * If this cpu is the one which updates jiffies, then
+		 * give up the assignment and let it be taken by the
+		 * cpu which runs the tick timer next, which might be
+		 * this cpu as well. If we don't drop this here the
+		 * jiffies might be stale and do_timer() never
+		 * invoked.
+		 */
+		if (cpu == tick_do_timer_cpu)
+			tick_do_timer_cpu = TICK_DO_TIMER_NONE;
+
 		if (delta_jiffies > 1)
 			cpu_set(cpu, nohz_cpu_mask);
+
+		/* Skip reprogram of event if its not changed */
+		if (ts->tick_stopped && ktime_equal(expires, dev->next_event))
+			goto out;
+
 		/*
 		 * nohz_stop_sched_tick can be called several times before
 		 * the nohz_restart_sched_tick is called. This happens when
@@ -306,17 +329,6 @@ void tick_nohz_stop_sched_tick(int inidle)
 			rcu_enter_nohz();
 		}
 
-		/*
-		 * If this cpu is the one which updates jiffies, then
-		 * give up the assignment and let it be taken by the
-		 * cpu which runs the tick timer next, which might be
-		 * this cpu as well. If we don't drop this here the
-		 * jiffies might be stale and do_timer() never
-		 * invoked.
-		 */
-		if (cpu == tick_do_timer_cpu)
-			tick_do_timer_cpu = TICK_DO_TIMER_NONE;
-
 		ts->idle_sleeps++;
 
 		/*
@@ -332,12 +344,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 			goto out;
 		}
 
-		/*
-		 * calculate the expiry time for the next timer wheel
-		 * timer
-		 */
-		expires = ktime_add_ns(last_update, tick_period.tv64 *
-				       delta_jiffies);
+		/* Mark expiries */
 		ts->idle_expires = expires;
 
 		if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
@@ -681,7 +688,6 @@ void tick_setup_sched_timer(void)
 	 */
 	hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
 	ts->sched_timer.function = tick_sched_timer;
-	ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
 
 	/* Get the next period (per cpu) */
 	hrtimer_set_expires(&ts->sched_timer, tick_init_jiffy_update());

kernel/trace/trace_sysprof.c

@@ -202,7 +202,6 @@ static void start_stack_timer(int cpu)
 
 	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	hrtimer->function = stack_trace_timer_fn;
-	hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
 
 	hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL);
 }

sound/core/hrtimer.c

@@ -57,7 +57,6 @@ static int snd_hrtimer_open(struct snd_timer *t)
 		return -ENOMEM;
 	hrtimer_init(&stime->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	stime->timer = t;
-	stime->hrt.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
 	stime->hrt.function = snd_hrtimer_callback;
 	t->private_data = stime;
 	return 0;

sound/drivers/pcsp/pcsp.c

@@ -96,7 +96,6 @@ static int __devinit snd_card_pcsp_probe(int devnum, struct device *dev)
 		return -EINVAL;
 
 	hrtimer_init(&pcsp_chip.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	pcsp_chip.timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
 	pcsp_chip.timer.function = pcsp_do_timer;
 
 	card = snd_card_new(index, id, THIS_MODULE, 0);