Commit bbaad144 authored by Sugaya Taichi's avatar Sugaya Taichi Committed by Arnd Bergmann

ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board

Add devicetree for Milbeaut M10V SoC and M10V Evaluation board.
Signed-off-by: default avatarSugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent b58f28f3
......@@ -1233,6 +1233,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7623n-bananapi-bpi-r2.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
......
// SPDX-License-Identifier: GPL-2.0
/* Socionext Milbeaut M10V Evaluation Board */
/dts-v1/;
#include "milbeaut-m10v.dtsi"
/ {
model = "Socionext M10V EVB";
compatible = "socionext,milbeaut-m10v-evb", "socionext,sc2000a";
aliases {
serial0 = &uart1;
};
chosen {
bootargs = "rootwait earlycon";
stdout-path = "serial0:115200n8";
};
clocks {
uclk40xi: uclk40xi {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x80000000>;
};
};
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "socionext,sc2000a";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "socionext,milbeaut-m10v-smp";
cpu@f00 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
};
cpu@f01 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf01>;
};
cpu@f02 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf02>;
};
cpu@f03 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf03>;
};
};
timer { /* The Generic Timer */
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
clock-frequency = <40000000>;
always-on;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-parent = <&gic>;
gic: interrupt-controller@1d000000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x1d001000 0x1000>,
<0x1d002000 0x1000>; /* CPU I/f base and size */
};
timer@1e000050 { /* 32-bit Reload Timers */
compatible = "socionext,milbeaut-timer";
reg = <0x1e000050 0x20>;
interrupts = <0 91 4>;
};
uart1: serial@1e700010 { /* PE4, PE5 */
/* Enable this as ttyUSI0 */
compatible = "socionext,milbeaut-usio-uart";
reg = <0x1e700010 0x10>;
interrupts = <0 141 0x4>, <0 149 0x4>;
interrupt-names = "rx", "tx";
};
};
sram@0 {
compatible = "mmio-sram";
reg = <0x0 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x10000>;
smp-sram@f100 {
compatible = "socionext,milbeaut-smp-sram";
reg = <0xf100 0x20>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment