ARM: dts: NSP: Add USB3 and USB3 PHY to NSP

This uses the existing Northstar USB3 PHY driver to enable the USB3
ports on NSP.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

arch/arm/boot/dts/bcm-nsp.dtsi

@@ -302,6 +302,16 @@ qspi: qspi@27200 {
 			#size-cells = <0>;
 		};
 
+		xhci: usb@29000 {
+			compatible = "generic-xhci";
+			reg = <0x29000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy>;
+			phy-names = "usb3-phy";
+			dma-coherent;
+			status = "disabled";
+		};
+
 		ehci0: usb@2a000 {
 			compatible = "generic-ehci";
 			reg = <0x2a000 0x100>;
@@ -469,6 +479,15 @@ sata1: sata-port@1 {
 				phy-names = "sata-phy";
 			};
 		};
+
+		usb3_phy: usb3-phy@104000 {
+			compatible = "brcm,ns-bx-usb3-phy";
+			reg = <0x104000 0x1000>,
+			      <0x032000 0x1000>;
+			reg-names = "dmp", "ccb-mii";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
 	};
 
 	pcie0: pcie@18012000 {

arch/arm/boot/dts/bcm958522er.dts

@@ -170,3 +170,11 @@ partition@700000 {
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};

arch/arm/boot/dts/bcm958525er.dts

@@ -182,3 +182,11 @@ &sata {
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};

arch/arm/boot/dts/bcm958525xmc.dts

@@ -202,3 +202,11 @@ &sdio {
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};

arch/arm/boot/dts/bcm958622hr.dts

@@ -219,3 +219,11 @@ fixed-link {
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};

arch/arm/boot/dts/bcm958623hr.dts

@@ -227,3 +227,11 @@ fixed-link {
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};

arch/arm/boot/dts/bcm958625hr.dts

@@ -229,3 +229,11 @@ fixed-link {
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};

arch/arm/boot/dts/bcm958625k.dts

@@ -264,3 +264,11 @@ &uart0 {
 &uart1 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};