Commit bc07844a authored by Thomas Gleixner's avatar Thomas Gleixner

x86: Distangle ioapic and i8259

The proposed Moorestown support patches use an extra feature flag
mechanism to make the ioapic work w/o an i8259. There is a much
simpler solution.

Most i8259 specific functions are already called dependend on the irq
number less than NR_IRQS_LEGACY. Replacing that constant by a
read_mostly variable which can be set to 0 by the platform setup code
allows us to achieve the same without any special feature flags.

That trivial change allows us to proceed with MRST w/o doing a full
blown overhaul of the ioapic code which would delay MRST unduly.
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent 3f4110a4
......@@ -143,6 +143,8 @@ extern int noioapicreroute;
/* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */
extern int timer_through_8259;
extern void io_apic_disable_legacy(void);
/*
* If we use the IO-APIC for IRQ routing, disable automatic
* assignment of PCI IRQ's.
......
......@@ -91,6 +91,11 @@ struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
/* # of MP IRQ source entries */
int mp_irq_entries;
/* Number of legacy interrupts */
static int nr_legacy_irqs __read_mostly = NR_IRQS_LEGACY;
/* GSI interrupts */
static int nr_irqs_gsi = NR_IRQS_LEGACY;
#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
int mp_bus_id_to_type[MAX_MP_BUSSES];
#endif
......@@ -172,6 +177,12 @@ static struct irq_cfg irq_cfgx[NR_IRQS] = {
[15] = { .vector = IRQ15_VECTOR, },
};
void __init io_apic_disable_legacy(void)
{
nr_legacy_irqs = 0;
nr_irqs_gsi = 0;
}
int __init arch_early_irq_init(void)
{
struct irq_cfg *cfg;
......@@ -189,7 +200,7 @@ int __init arch_early_irq_init(void)
desc->chip_data = &cfg[i];
zalloc_cpumask_var_node(&cfg[i].domain, GFP_NOWAIT, node);
zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_NOWAIT, node);
if (i < NR_IRQS_LEGACY)
if (i < nr_legacy_irqs)
cpumask_setall(cfg[i].domain);
}
......@@ -883,7 +894,7 @@ static int __init find_isa_irq_apic(int irq, int type)
*/
static int EISA_ELCR(unsigned int irq)
{
if (irq < NR_IRQS_LEGACY) {
if (irq < nr_legacy_irqs) {
unsigned int port = 0x4d0 + (irq >> 3);
return (inb(port) >> (irq & 7)) & 1;
}
......@@ -1480,7 +1491,7 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq
}
ioapic_register_intr(irq, desc, trigger);
if (irq < NR_IRQS_LEGACY)
if (irq < nr_legacy_irqs)
disable_8259A_irq(irq);
ioapic_write_entry(apic_id, pin, entry);
......@@ -1851,7 +1862,7 @@ __apicdebuginit(void) print_PIC(void)
unsigned int v;
unsigned long flags;
if (apic_verbosity == APIC_QUIET)
if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs)
return;
printk(KERN_DEBUG "\nprinting PIC contents\n");
......@@ -1914,6 +1925,10 @@ void __init enable_IO_APIC(void)
spin_unlock_irqrestore(&ioapic_lock, flags);
nr_ioapic_registers[apic] = reg_01.bits.entries+1;
}
if (!nr_legacy_irqs)
return;
for(apic = 0; apic < nr_ioapics; apic++) {
int pin;
/* See if any of the pins is in ExtINT mode */
......@@ -1968,6 +1983,9 @@ void disable_IO_APIC(void)
*/
clear_IO_APIC();
if (!nr_legacy_irqs)
return;
/*
* If the i8259 is routed through an IOAPIC
* Put that IOAPIC in virtual wire mode
......@@ -2198,7 +2216,7 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
struct irq_cfg *cfg;
spin_lock_irqsave(&ioapic_lock, flags);
if (irq < NR_IRQS_LEGACY) {
if (irq < nr_legacy_irqs) {
disable_8259A_irq(irq);
if (i8259A_irq_pending(irq))
was_pending = 1;
......@@ -2709,7 +2727,7 @@ static inline void init_IO_APIC_traps(void)
* so default to an old-fashioned 8259
* interrupt if we can..
*/
if (irq < NR_IRQS_LEGACY)
if (irq < nr_legacy_irqs)
make_8259A_irq(irq);
else
/* Strange. Oh, well.. */
......@@ -3045,7 +3063,7 @@ static inline void __init check_timer(void)
* the I/O APIC in all cases now. No actual device should request
* it anyway. --macro
*/
#define PIC_IRQS (1 << PIC_CASCADE_IR)
#define PIC_IRQS (1UL << PIC_CASCADE_IR)
void __init setup_IO_APIC(void)
{
......@@ -3053,8 +3071,7 @@ void __init setup_IO_APIC(void)
/*
* calling enable_IO_APIC() is moved to setup_local_APIC for BP
*/
io_apic_irqs = ~PIC_IRQS;
io_apic_irqs = nr_legacy_irqs ? ~PIC_IRQS : ~0UL;
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
/*
......@@ -3065,7 +3082,8 @@ void __init setup_IO_APIC(void)
sync_Arb_IDs();
setup_IO_APIC_irqs();
init_IO_APIC_traps();
check_timer();
if (nr_legacy_irqs)
check_timer();
}
/*
......@@ -3166,7 +3184,6 @@ static int __init ioapic_init_sysfs(void)
device_initcall(ioapic_init_sysfs);
static int nr_irqs_gsi = NR_IRQS_LEGACY;
/*
* Dynamic irq allocate and deallocation
*/
......@@ -3907,7 +3924,7 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq,
/*
* IRQs < 16 are already in the irq_2_pin[] map
*/
if (irq >= NR_IRQS_LEGACY) {
if (irq >= nr_legacy_irqs) {
cfg = desc->chip_data;
add_pin_to_irq_node(cfg, node, ioapic, pin);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment