[media] Add support for M-5MOLS 8 Mega Pixel camera ISP

Add I2C/V4L2 subdev driver for M-5MOLS integrated image signal processor
with 8 Mega Pixel sensor.
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/Kconfig

@@ -757,6 +757,8 @@ config VIDEO_NOON010PC30
 	---help---
 	  This driver supports NOON010PC30 CIF camera from Siliconfile
 
+source "drivers/media/video/m5mols/Kconfig"
+
 config VIDEO_OMAP3
 	tristate "OMAP 3 Camera support (EXPERIMENTAL)"
 	select OMAP_IOMMU

drivers/media/video/Makefile

@@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
 obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
 obj-$(CONFIG_VIDEO_SR030PC30)	+= sr030pc30.o
 obj-$(CONFIG_VIDEO_NOON010PC30)	+= noon010pc30.o
+obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
 
 obj-$(CONFIG_SOC_CAMERA_IMX074)		+= imx074.o
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o

drivers/media/video/m5mols/Kconfig

+config VIDEO_M5MOLS
+	tristate "Fujitsu M-5MOLS 8MP sensor support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	---help---
+	  This driver supports Fujitsu M-5MOLS camera sensor with ISP

drivers/media/video/m5mols/Makefile

+m5mols-objs	:= m5mols_core.o m5mols_controls.o m5mols_capture.o
+
+obj-$(CONFIG_VIDEO_M5MOLS)		+= m5mols.o

drivers/media/video/m5mols/m5mols.h

+/*
+ * Header for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim, riverful.kim@samsung.com
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef M5MOLS_H
+#define M5MOLS_H
+
+#include <media/v4l2-subdev.h>
+#include "m5mols_reg.h"
+
+extern int m5mols_debug;
+
+#define to_m5mols(__sd)	container_of(__sd, struct m5mols_info, sd)
+
+#define to_sd(__ctrl) \
+	(&container_of(__ctrl->handler, struct m5mols_info, handle)->sd)
+
+enum m5mols_restype {
+	M5MOLS_RESTYPE_MONITOR,
+	M5MOLS_RESTYPE_CAPTURE,
+	M5MOLS_RESTYPE_MAX,
+};
+
+/**
+ * struct m5mols_resolution - structure for the resolution
+ * @type: resolution type according to the pixel code
+ * @width: width of the resolution
+ * @height: height of the resolution
+ * @reg: resolution preset register value
+ */
+struct m5mols_resolution {
+	u8 reg;
+	enum m5mols_restype type;
+	u16 width;
+	u16 height;
+};
+
+/**
+ * struct m5mols_exif - structure for the EXIF information of M-5MOLS
+ * @exposure_time: exposure time register value
+ * @shutter_speed: speed of the shutter register value
+ * @aperture: aperture register value
+ * @exposure_bias: it calls also EV bias
+ * @iso_speed: ISO register value
+ * @flash: status register value of the flash
+ * @sdr: status register value of the Subject Distance Range
+ * @qval: not written exact meaning in document
+ */
+struct m5mols_exif {
+	u32 exposure_time;
+	u32 shutter_speed;
+	u32 aperture;
+	u32 brightness;
+	u32 exposure_bias;
+	u16 iso_speed;
+	u16 flash;
+	u16 sdr;
+	u16 qval;
+};
+
+/**
+ * struct m5mols_capture - Structure for the capture capability
+ * @exif: EXIF information
+ * @main: size in bytes of the main image
+ * @thumb: size in bytes of the thumb image, if it was accompanied
+ * @total: total size in bytes of the produced image
+ */
+struct m5mols_capture {
+	struct m5mols_exif exif;
+	u32 main;
+	u32 thumb;
+	u32 total;
+};
+
+/**
+ * struct m5mols_scenemode - structure for the scenemode capability
+ * @metering: metering light register value
+ * @ev_bias: EV bias register value
+ * @wb_mode: mode which means the WhiteBalance is Auto or Manual
+ * @wb_preset: whitebalance preset register value in the Manual mode
+ * @chroma_en: register value whether the Chroma capability is enabled or not
+ * @chroma_lvl: chroma's level register value
+ * @edge_en: register value Whether the Edge capability is enabled or not
+ * @edge_lvl: edge's level register value
+ * @af_range: Auto Focus's range
+ * @fd_mode: Face Detection mode
+ * @mcc: Multi-axis Color Conversion which means emotion color
+ * @light: status of the Light
+ * @flash: status of the Flash
+ * @tone: Tone color which means Contrast
+ * @iso: ISO register value
+ * @capt_mode: Mode of the Image Stabilization while the camera capturing
+ * @wdr: Wide Dynamic Range register value
+ *
+ * The each value according to each scenemode is recommended in the documents.
+ */
+struct m5mols_scenemode {
+	u32 metering;
+	u32 ev_bias;
+	u32 wb_mode;
+	u32 wb_preset;
+	u32 chroma_en;
+	u32 chroma_lvl;
+	u32 edge_en;
+	u32 edge_lvl;
+	u32 af_range;
+	u32 fd_mode;
+	u32 mcc;
+	u32 light;
+	u32 flash;
+	u32 tone;
+	u32 iso;
+	u32 capt_mode;
+	u32 wdr;
+};
+
+/**
+ * struct m5mols_version - firmware version information
+ * @customer:	customer information
+ * @project:	version of project information according to customer
+ * @fw:		firmware revision
+ * @hw:		hardware revision
+ * @param:	version of the parameter
+ * @awb:	Auto WhiteBalance algorithm version
+ * @str:	information about manufacturer and packaging vendor
+ * @af:		Auto Focus version
+ *
+ * The register offset starts the customer version at 0x0, and it ends
+ * the awb version at 0x09. The customer, project information occupies 1 bytes
+ * each. And also the fw, hw, param, awb each requires 2 bytes. The str is
+ * unique string associated with firmware's version. It includes information
+ * about manufacturer and the vendor of the sensor's packaging. The least
+ * significant 2 bytes of the string indicate packaging manufacturer.
+ */
+#define VERSION_STRING_SIZE	22
+struct m5mols_version {
+	u8	customer;
+	u8	project;
+	u16	fw;
+	u16	hw;
+	u16	param;
+	u16	awb;
+	u8	str[VERSION_STRING_SIZE];
+	u8	af;
+};
+#define VERSION_SIZE sizeof(struct m5mols_version)
+
+/**
+ * struct m5mols_info - M-5MOLS driver data structure
+ * @pdata: platform data
+ * @sd: v4l-subdev instance
+ * @pad: media pad
+ * @ffmt: current fmt according to resolution type
+ * @res_type: current resolution type
+ * @code: current code
+ * @irq_waitq: waitqueue for the capture
+ * @work_irq: workqueue for the IRQ
+ * @flags: state variable for the interrupt handler
+ * @handle: control handler
+ * @autoexposure: Auto Exposure control
+ * @exposure: Exposure control
+ * @autowb: Auto White Balance control
+ * @colorfx: Color effect control
+ * @saturation:	Saturation control
+ * @zoom: Zoom control
+ * @ver: information of the version
+ * @cap: the capture mode attributes
+ * @power: current sensor's power status
+ * @ctrl_sync: true means all controls of the sensor are initialized
+ * @int_capture: true means the capture interrupt is issued once
+ * @lock_ae: true means the Auto Exposure is locked
+ * @lock_awb: true means the Aut WhiteBalance is locked
+ * @resolution:	register value for current resolution
+ * @interrupt: register value for current interrupt status
+ * @mode: register value for current operation mode
+ * @mode_save: register value for current operation mode for saving
+ * @set_power: optional power callback to the board code
+ */
+struct m5mols_info {
+	const struct m5mols_platform_data *pdata;
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+	struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX];
+	int res_type;
+	enum v4l2_mbus_pixelcode code;
+	wait_queue_head_t irq_waitq;
+	struct work_struct work_irq;
+	unsigned long flags;
+
+	struct v4l2_ctrl_handler handle;
+	/* Autoexposure/exposure control cluster */
+	struct {
+		struct v4l2_ctrl *autoexposure;
+		struct v4l2_ctrl *exposure;
+	};
+	struct v4l2_ctrl *autowb;
+	struct v4l2_ctrl *colorfx;
+	struct v4l2_ctrl *saturation;
+	struct v4l2_ctrl *zoom;
+
+	struct m5mols_version ver;
+	struct m5mols_capture cap;
+	bool power;
+	bool ctrl_sync;
+	bool lock_ae;
+	bool lock_awb;
+	u8 resolution;
+	u32 interrupt;
+	u32 mode;
+	u32 mode_save;
+	int (*set_power)(struct device *dev, int on);
+};
+
+#define ST_CAPT_IRQ 0
+
+#define is_powered(__info) (__info->power)
+#define is_ctrl_synced(__info) (__info->ctrl_sync)
+#define is_available_af(__info)	(__info->ver.af)
+#define is_code(__code, __type) (__code == m5mols_default_ffmt[__type].code)
+#define is_manufacturer(__info, __manufacturer)	\
+				(__info->ver.str[0] == __manufacturer[0] && \
+				 __info->ver.str[1] == __manufacturer[1])
+/*
+ * I2C operation of the M-5MOLS
+ *
+ * The I2C read operation of the M-5MOLS requires 2 messages. The first
+ * message sends the information about the command, command category, and total
+ * message size. The second message is used to retrieve the data specifed in
+ * the first message
+ *
+ *   1st message                                2nd message
+ *   +-------+---+----------+-----+-------+     +------+------+------+------+
+ *   | size1 | R | category | cmd | size2 |     | d[0] | d[1] | d[2] | d[3] |
+ *   +-------+---+----------+-----+-------+     +------+------+------+------+
+ *   - size1: message data size(5 in this case)
+ *   - size2: desired buffer size of the 2nd message
+ *   - d[0..3]: according to size2
+ *
+ * The I2C write operation needs just one message. The message includes
+ * category, command, total size, and desired data.
+ *
+ *   1st message
+ *   +-------+---+----------+-----+------+------+------+------+
+ *   | size1 | W | category | cmd | d[0] | d[1] | d[2] | d[3] |
+ *   +-------+---+----------+-----+------+------+------+------+
+ *   - d[0..3]: according to size1
+ */
+int m5mols_read(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
+int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val);
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value);
+
+/*
+ * Mode operation of the M-5MOLS
+ *
+ * Changing the mode of the M-5MOLS is needed right executing order.
+ * There are three modes(PARAMETER, MONITOR, CAPTURE) which can be changed
+ * by user. There are various categories associated with each mode.
+ *
+ * +============================================================+
+ * | mode	| category					|
+ * +============================================================+
+ * | FLASH	| FLASH(only after Stand-by or Power-on)	|
+ * | SYSTEM	| SYSTEM(only after sensor arm-booting)		|
+ * | PARAMETER	| PARAMETER					|
+ * | MONITOR	| MONITOR(preview), Auto Focus, Face Detection	|
+ * | CAPTURE	| Single CAPTURE, Preview(recording)		|
+ * +============================================================+
+ *
+ * The available executing order between each modes are as follows:
+ *   PARAMETER <---> MONITOR <---> CAPTURE
+ */
+int m5mols_mode(struct m5mols_info *info, u32 mode);
+
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg);
+int m5mols_sync_controls(struct m5mols_info *info);
+int m5mols_start_capture(struct m5mols_info *info);
+int m5mols_do_scenemode(struct m5mols_info *info, u32 mode);
+int m5mols_lock_3a(struct m5mols_info *info, bool lock);
+int m5mols_set_ctrl(struct v4l2_ctrl *ctrl);
+
+/* The firmware function */
+int m5mols_update_fw(struct v4l2_subdev *sd,
+		     int (*set_power)(struct m5mols_info *, bool));
+
+#endif	/* M5MOLS_H */

drivers/media/video/m5mols/m5mols_capture.c

+/*
+ * The Capture code for Fujitsu M-5MOLS ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim, riverful.kim@samsung.com
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/version.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/videodev2.h>
+#include <linux/version.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/m5mols.h>
+
+#include "m5mols.h"
+#include "m5mols_reg.h"
+
+static int m5mols_capture_error_handler(struct m5mols_info *info,
+					int timeout)
+{
+	int ret;
+
+	/* Disable all interrupts and clear relevant interrupt staus bits */
+	ret = m5mols_write(&info->sd, SYSTEM_INT_ENABLE,
+			   info->interrupt & ~(REG_INT_CAPTURE));
+	if (ret)
+		return ret;
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+/**
+ * m5mols_read_rational - I2C read of a rational number
+ *
+ * Read numerator and denominator from registers @addr_num and @addr_den
+ * respectively and return the division result in @val.
+ */
+static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num,
+				u32 addr_den, u32 *val)
+{
+	u32 num, den;
+
+	int ret = m5mols_read(sd, addr_num, &num);
+	if (!ret)
+		ret = m5mols_read(sd, addr_den, &den);
+	if (ret)
+		return ret;
+	*val = den == 0 ? 0 : num / den;
+	return ret;
+}
+
+/**
+ * m5mols_capture_info - Gather captured image information
+ *
+ * For now it gathers only EXIF information and file size.
+ */
+static int m5mols_capture_info(struct m5mols_info *info)
+{
+	struct m5mols_exif *exif = &info->cap.exif;
+	struct v4l2_subdev *sd = &info->sd;
+	int ret;
+
+	ret = m5mols_read_rational(sd, EXIF_INFO_EXPTIME_NU,
+				   EXIF_INFO_EXPTIME_DE, &exif->exposure_time);
+	if (ret)
+		return ret;
+	ret = m5mols_read_rational(sd, EXIF_INFO_TV_NU, EXIF_INFO_TV_DE,
+				   &exif->shutter_speed);
+	if (ret)
+		return ret;
+	ret = m5mols_read_rational(sd, EXIF_INFO_AV_NU, EXIF_INFO_AV_DE,
+				   &exif->aperture);
+	if (ret)
+		return ret;
+	ret = m5mols_read_rational(sd, EXIF_INFO_BV_NU, EXIF_INFO_BV_DE,
+				   &exif->brightness);
+	if (ret)
+		return ret;
+	ret = m5mols_read_rational(sd, EXIF_INFO_EBV_NU, EXIF_INFO_EBV_DE,
+				   &exif->exposure_bias);
+	if (ret)
+		return ret;
+
+	ret = m5mols_read(sd, EXIF_INFO_ISO, (u32 *)&exif->iso_speed);
+	if (!ret)
+		ret = m5mols_read(sd, EXIF_INFO_FLASH, (u32 *)&exif->flash);
+	if (!ret)
+		ret = m5mols_read(sd, EXIF_INFO_SDR, (u32 *)&exif->sdr);
+	if (!ret)
+		ret = m5mols_read(sd, EXIF_INFO_QVAL, (u32 *)&exif->qval);
+	if (ret)
+		return ret;
+
+	if (!ret)
+		ret = m5mols_read(sd, CAPC_IMAGE_SIZE, &info->cap.main);
+	if (!ret)
+		ret = m5mols_read(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
+	if (!ret)
+		info->cap.total = info->cap.main + info->cap.thumb;
+
+	return ret;
+}
+
+int m5mols_start_capture(struct m5mols_info *info)
+{
+	struct v4l2_subdev *sd = &info->sd;
+	u32 resolution = info->resolution;
+	int timeout;
+	int ret;
+
+	/*
+	 * Preparing capture. Setting control & interrupt before entering
+	 * capture mode
+	 *
+	 * 1) change to MONITOR mode for operating control & interrupt
+	 * 2) set controls (considering v4l2_control value & lock 3A)
+	 * 3) set interrupt
+	 * 4) change to CAPTURE mode
+	 */
+	ret = m5mols_mode(info, REG_MONITOR);
+	if (!ret)
+		ret = m5mols_sync_controls(info);
+	if (!ret)
+		ret = m5mols_lock_3a(info, true);
+	if (!ret)
+		ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE);
+	if (!ret)
+		ret = m5mols_mode(info, REG_CAPTURE);
+	if (!ret) {
+		/* Wait for capture interrupt, after changing capture mode */
+		timeout = wait_event_interruptible_timeout(info->irq_waitq,
+					   test_bit(ST_CAPT_IRQ, &info->flags),
+					   msecs_to_jiffies(2000));
+		if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags))
+			ret = m5mols_capture_error_handler(info, timeout);
+	}
+	if (!ret)
+		ret = m5mols_lock_3a(info, false);
+	if (ret)
+		return ret;
+	/*
+	 * Starting capture. Setting capture frame count and resolution and
+	 * the format(available format: JPEG, Bayer RAW, YUV).
+	 *
+	 * 1) select single or multi(enable to 25), format, size
+	 * 2) set interrupt
+	 * 3) start capture(for main image, now)
+	 * 4) get information
+	 * 5) notify file size to v4l2 device(e.g, to s5p-fimc v4l2 device)
+	 */
+	ret = m5mols_write(sd, CAPC_SEL_FRAME, 1);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, resolution);
+	if (!ret)
+		ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE);
+	if (!ret)
+		ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN);
+	if (!ret) {
+		/* Wait for the capture completion interrupt */
+		timeout = wait_event_interruptible_timeout(info->irq_waitq,
+					   test_bit(ST_CAPT_IRQ, &info->flags),
+					   msecs_to_jiffies(2000));
+		if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags)) {
+			ret = m5mols_capture_info(info);
+			if (!ret)
+				v4l2_subdev_notify(sd, 0, &info->cap.total);
+		}
+	}
+
+	return m5mols_capture_error_handler(info, timeout);
+}

drivers/media/video/m5mols/m5mols_controls.c

+/*
+ * Controls for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim, riverful.kim@samsung.com
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+
+#include "m5mols.h"
+#include "m5mols_reg.h"
+
+static struct m5mols_scenemode m5mols_default_scenemode[] = {
+	[REG_SCENE_NORMAL] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_NORMAL, REG_LIGHT_OFF, REG_FLASH_OFF,
+		5, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_PORTRAIT] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 4,
+		REG_AF_NORMAL, BIT_FD_EN | BIT_FD_DRAW_FACE_FRAME,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_LANDSCAPE] = {
+		REG_AE_ALL, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 4, REG_EDGE_ON, 6,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_SPORTS] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_PARTY_INDOOR] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 4, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_200, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_BEACH_SNOW] = {
+		REG_AE_CENTER, REG_AE_INDEX_10_POS, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 4, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_SUNSET] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET,
+		REG_AWB_DAYLIGHT,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_DAWN_DUSK] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET,
+		REG_AWB_FLUORESCENT_1,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_FALL] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 5, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_NIGHT] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_AGAINST_LIGHT] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_FIRE] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_TEXT] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 7,
+		REG_AF_MACRO, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_ANTI_SHAKE, REG_WDR_ON,
+	},
+	[REG_SCENE_CANDLE] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+};
+
+/**
+ * m5mols_do_scenemode() - Change current scenemode
+ * @mode:	Desired mode of the scenemode
+ *
+ * WARNING: The execution order is important. Do not change the order.
+ */
+int m5mols_do_scenemode(struct m5mols_info *info, u32 mode)
+{
+	struct v4l2_subdev *sd = &info->sd;
+	struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode];
+	int ret;
+
+	if (mode > REG_SCENE_CANDLE)
+		return -EINVAL;
+
+	ret = m5mols_lock_3a(info, false);
+	if (!ret)
+		ret = m5mols_write(sd, AE_EV_PRESET_MONITOR, mode);
+	if (!ret)
+		ret = m5mols_write(sd, AE_EV_PRESET_CAPTURE, mode);
+	if (!ret)
+		ret = m5mols_write(sd, AE_MODE, scenemode.metering);
+	if (!ret)
+		ret = m5mols_write(sd, AE_INDEX, scenemode.ev_bias);
+	if (!ret)
+		ret = m5mols_write(sd, AWB_MODE, scenemode.wb_mode);
+	if (!ret)
+		ret = m5mols_write(sd, AWB_MANUAL, scenemode.wb_preset);
+	if (!ret)
+		ret = m5mols_write(sd, MON_CHROMA_EN, scenemode.chroma_en);
+	if (!ret)
+		ret = m5mols_write(sd, MON_CHROMA_LVL, scenemode.chroma_lvl);
+	if (!ret)
+		ret = m5mols_write(sd, MON_EDGE_EN, scenemode.edge_en);
+	if (!ret)
+		ret = m5mols_write(sd, MON_EDGE_LVL, scenemode.edge_lvl);
+	if (!ret && is_available_af(info))
+		ret = m5mols_write(sd, AF_MODE, scenemode.af_range);
+	if (!ret && is_available_af(info))
+		ret = m5mols_write(sd, FD_CTL, scenemode.fd_mode);
+	if (!ret)
+		ret = m5mols_write(sd, MON_TONE_CTL, scenemode.tone);
+	if (!ret)
+		ret = m5mols_write(sd, AE_ISO, scenemode.iso);
+	if (!ret)
+		ret = m5mols_mode(info, REG_CAPTURE);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_WDR_EN, scenemode.wdr);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_MCC_MODE, scenemode.mcc);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_LIGHT_CTRL, scenemode.light);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_FLASH_CTRL, scenemode.flash);
+	if (!ret)
+		ret = m5mols_write(sd, CAPC_MODE, scenemode.capt_mode);
+	if (!ret)
+		ret = m5mols_mode(info, REG_MONITOR);
+
+	return ret;
+}
+
+static int m5mols_lock_ae(struct m5mols_info *info, bool lock)
+{
+	int ret = 0;
+
+	if (info->lock_ae != lock)
+		ret = m5mols_write(&info->sd, AE_LOCK,
+				lock ? REG_AE_LOCK : REG_AE_UNLOCK);
+	if (!ret)
+		info->lock_ae = lock;
+
+	return ret;
+}
+
+static int m5mols_lock_awb(struct m5mols_info *info, bool lock)
+{
+	int ret = 0;
+
+	if (info->lock_awb != lock)
+		ret = m5mols_write(&info->sd, AWB_LOCK,
+				lock ? REG_AWB_LOCK : REG_AWB_UNLOCK);
+	if (!ret)
+		info->lock_awb = lock;
+
+	return ret;
+}
+
+/* m5mols_lock_3a() - Lock 3A(Auto Exposure, Auto Whitebalance, Auto Focus) */
+int m5mols_lock_3a(struct m5mols_info *info, bool lock)
+{
+	int ret;
+
+	ret = m5mols_lock_ae(info, lock);
+	if (!ret)
+		ret = m5mols_lock_awb(info, lock);
+	/* Don't need to handle unlocking AF */
+	if (!ret && is_available_af(info) && lock)
+		ret = m5mols_write(&info->sd, AF_EXECUTE, REG_AF_STOP);
+
+	return ret;
+}
+
+/* m5mols_set_ctrl() - The main s_ctrl function called by m5mols_set_ctrl() */
+int m5mols_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct v4l2_subdev *sd = to_sd(ctrl);
+	struct m5mols_info *info = to_m5mols(sd);
+	int ret;
+
+	switch (ctrl->id) {
+	case V4L2_CID_ZOOM_ABSOLUTE:
+		return m5mols_write(sd, MON_ZOOM, ctrl->val);
+
+	case V4L2_CID_EXPOSURE_AUTO:
+		ret = m5mols_lock_ae(info,
+			ctrl->val == V4L2_EXPOSURE_AUTO ? false : true);
+		if (!ret && ctrl->val == V4L2_EXPOSURE_AUTO)
+			ret = m5mols_write(sd, AE_MODE, REG_AE_ALL);
+		if (!ret && ctrl->val == V4L2_EXPOSURE_MANUAL) {
+			int val = info->exposure->val;
+			ret = m5mols_write(sd, AE_MODE, REG_AE_OFF);
+			if (!ret)
+				ret = m5mols_write(sd, AE_MAN_GAIN_MON, val);
+			if (!ret)
+				ret = m5mols_write(sd, AE_MAN_GAIN_CAP, val);
+		}
+		return ret;
+
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		ret = m5mols_lock_awb(info, ctrl->val ? false : true);
+		if (!ret)
+			ret = m5mols_write(sd, AWB_MODE, ctrl->val ?
+				REG_AWB_AUTO : REG_AWB_PRESET);
+		return ret;
+
+	case V4L2_CID_SATURATION:
+		ret = m5mols_write(sd, MON_CHROMA_LVL, ctrl->val);
+		if (!ret)
+			ret = m5mols_write(sd, MON_CHROMA_EN, REG_CHROMA_ON);
+		return ret;
+
+	case V4L2_CID_COLORFX:
+		/*
+		 * This control uses two kinds of registers: normal & color.
+		 * The normal effect belongs to category 1, while the color
+		 * one belongs to category 2.
+		 *
+		 * The normal effect uses one register: CAT1_EFFECT.
+		 * The color effect uses three registers:
+		 * CAT2_COLOR_EFFECT, CAT2_CFIXR, CAT2_CFIXB.
+		 */
+		ret = m5mols_write(sd, PARM_EFFECT,
+			ctrl->val == V4L2_COLORFX_NEGATIVE ? REG_EFFECT_NEGA :
+			ctrl->val == V4L2_COLORFX_EMBOSS ? REG_EFFECT_EMBOSS :
+			REG_EFFECT_OFF);
+		if (!ret)
+			ret = m5mols_write(sd, MON_EFFECT,
+				ctrl->val == V4L2_COLORFX_SEPIA ?
+				REG_COLOR_EFFECT_ON : REG_COLOR_EFFECT_OFF);
+		if (!ret)
+			ret = m5mols_write(sd, MON_CFIXR,
+				ctrl->val == V4L2_COLORFX_SEPIA ?
+				REG_CFIXR_SEPIA : 0);
+		if (!ret)
+			ret = m5mols_write(sd, MON_CFIXB,
+				ctrl->val == V4L2_COLORFX_SEPIA ?
+				REG_CFIXB_SEPIA : 0);
+		return ret;
+	}
+
+	return -EINVAL;
+}

include/media/m5mols.h

+/*
+ * Driver header for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim, riverful.kim@samsung.com
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef MEDIA_M5MOLS_H
+#define MEDIA_M5MOLS_H
+
+/**
+ * struct m5mols_platform_data - platform data for M-5MOLS driver
+ * @irq:	GPIO getting the irq pin of M-5MOLS
+ * @gpio_reset:	GPIO driving the reset pin of M-5MOLS
+ * @reset_polarity: active state for gpio_rst pin, 0 or 1
+ * @set_power:	an additional callback to the board setup code
+ *		to be called after enabling and before disabling
+ *		the sensor's supply regulators
+ */
+struct m5mols_platform_data {
+	int irq;
+	int gpio_reset;
+	u8 reset_polarity;
+	int (*set_power)(struct device *dev, int on);
+};
+
+#endif	/* MEDIA_M5MOLS_H */